[PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB

Kishon Vijay Abraham I kishon at ti.com
Fri Jan 25 21:26:52 EST 2013


This patch series adds dt data to get MUSB working in omap4 and omap3.
Long time back a patch series with the same title was sent but only
a part of it got merged. The rest of it wasn't merged because of
adding omap control usb data to glue and usb phy.

Now there exists a separate driver for control usb and hence added a
separate dt node for control usb.

Changes from v2:
* Changed property names from "ti,has_mailbox" to "ti,has-mailbox",
  "ctrl_module" to "ctrl-module", "usb_phy" to "usb-phy"

Changes from v1:
* "ti,has_mailbox" property is removed and "ti,type" property is added
  and filled with value "1" to specify it has a mailbox

This series was developed on
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv
+ "usb: musb: add driver for control module" patch series

Did basic enumeration testing in omap4 panda, omap4 sdp and omap3 beagle.

Kishon Vijay Abraham I (3):
  ARM: dts: omap: Add omap control usb data
  ARM: dts: omap: Add omap-usb2 dt data
  ARM: dts: omap: Add usb_otg and glue data

 Documentation/devicetree/bindings/usb/omap-usb.txt |    2 ++
 arch/arm/boot/dts/omap3-beagle-xm.dts              |    6 +++++
 arch/arm/boot/dts/omap3-evm.dts                    |    6 +++++
 arch/arm/boot/dts/omap3-overo.dtsi                 |    6 +++++
 arch/arm/boot/dts/omap3.dtsi                       |   12 +++++++++
 arch/arm/boot/dts/omap4-panda.dts                  |    6 +++++
 arch/arm/boot/dts/omap4-sdp.dts                    |    6 +++++
 arch/arm/boot/dts/omap4.dtsi                       |   26 ++++++++++++++++++++
 arch/arm/boot/dts/twl4030.dtsi                     |    2 +-
 9 files changed, 71 insertions(+), 1 deletion(-)

-- 
1.7.9.5



More information about the devicetree-discuss mailing list