[PATCH RFC] media: tvp514x: add OF support
Prabhakar Lad
prabhakar.csengg at gmail.com
Thu Jan 24 22:34:51 EST 2013
Hi Laurent,
On Thu, Jan 24, 2013 at 4:17 PM, Laurent Pinchart
<laurent.pinchart at ideasonboard.com> wrote:
> Hi Prabhakar,
>
> Thank you for the patch.
>
> Sylwester and Guennadi have posted a DT bindings proposal for V4L2 devices.
> Shouldn't you base this patch on those bindings ?
>
Yes I'll base on it and post a v2.
Regards,
--Prabhakar
> On Thursday 24 January 2013 14:42:20 Prabhakar Lad wrote:
>> From: Lad, Prabhakar <prabhakar.lad at ti.com>
>>
>> add OF support for the tvp514x driver.
>>
>> Signed-off-by: Lad, Prabhakar <prabhakar.lad at ti.com>
>> Cc: Hans Verkuil <hans.verkuil at cisco.com>
>> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>> Cc: Mauro Carvalho Chehab <mchehab at redhat.com>
>> Cc: Guennadi Liakhovetski <g.liakhovetski at gmx.de>
>> ---
>> This patch is on top of following patches:
>> 1: https://patchwork.kernel.org/patch/1930941/
>> 2: http://patchwork.linuxtv.org/patch/16193/
>> 3: https://patchwork.kernel.org/patch/1944901/
>>
>> .../devicetree/bindings/media/i2c/tvp514x.txt | 30 ++++++++++
>> drivers/media/i2c/tvp514x.c | 60 +++++++++++++++--
>> 2 files changed, 85 insertions(+), 5 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp514x.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
>> b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt new file mode
>> 100644
>> index 0000000..3cce323
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
>> @@ -0,0 +1,30 @@
>> +* Texas Instruments TVP514x video decoder
>> +
>> +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip
>> +digital video decoder that digitizes and decodes all popular baseband
>> analog +video formats into digital video component. The tvp514x decoder
>> supports analog- +to-digital (A/D) conversion of component RGB and YPbPr
>> signals as well as A/D +conversion and decoding of NTSC, PAL and SECAM
>> composite and S-video into +component YCbCr.
>> +
>> +Required Properties :
>> +- compatible: Must be "ti,tvp514x-decoder"
>> +- hsync-active: HSYNC Polarity configuration for current interface.
>> +- vsync-active: VSYNC Polarity configuration for current interface.
>> +- data-active: Clock polarity of the current interface.
>> +
>> +Example:
>> +
>> +i2c0 at 1c22000 {
>> + ...
>> + ...
>> +
>> + tvp514x at 5c {
>> + compatible = "ti,tvp514x-decoder";
>> + reg = <0x5c>;
>> + hsync-active = <1>; /* Active low (Defaults to 0) */
>> + hsync-active = <1>; /* Active low (Defaults to 0) */
>> + data-active = <0>; /* Active low (Defaults to 0) */
>> + };
>> + ...
>> +};
>> diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c
>> index a4f0a70..0e2b15c 100644
>> --- a/drivers/media/i2c/tvp514x.c
>> +++ b/drivers/media/i2c/tvp514x.c
>> @@ -12,6 +12,7 @@
>> * Hardik Shah <hardik.shah at ti.com>
>> * Manjunath Hadli <mrh at ti.com>
>> * Karicheri Muralidharan <m-karicheri2 at ti.com>
>> + * Prabhakar Lad <prabhakar.lad at ti.com>
>> *
>> * This package is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License version 2 as
>> @@ -930,6 +931,50 @@ static struct tvp514x_decoder tvp514x_dev = {
>>
>> };
>>
>> +#if defined(CONFIG_OF)
>> +static const struct of_device_id tvp514x_of_match[] = {
>> + {.compatible = "ti,tvp514x-decoder", },
>> + {},
>> +}
>> +MODULE_DEVICE_TABLE(of, tvp514x_of_match);
>> +
>> +static struct tvp514x_platform_data
>> + *tvp514x_get_pdata(struct i2c_client *client)
>> +{
>> + if (!client->dev.platform_data && client->dev.of_node) {
>> + struct tvp514x_platform_data *pdata;
>> + u32 prop;
>> +
>> + pdata = devm_kzalloc(&client->dev,
>> + sizeof(struct tvp514x_platform_data),
>> + GFP_KERNEL);
>> + client->dev.platform_data = pdata;
>> + if (!pdata)
>> + return NULL;
>> + if (!of_property_read_u32(client->dev.of_node,
>> + "data-active", &prop))
>> + pdata->clk_polarity = prop;
>> + if (!of_property_read_u32(client->dev.of_node,
>> + "hsync-active", &prop))
>> + pdata->hs_polarity = prop;
>> + if (!of_property_read_u32(client->dev.of_node,
>> + "vsync-active", &prop))
>> + pdata->vs_polarity = prop;
>> +
>> + }
>> +
>> + return client->dev.platform_data;
>> +}
>> +#else
>> +#define tvp514x_of_match NULL
>> +
>> +static struct tvp514x_platform_data
>> + *tvp514x_get_pdata(struct i2c_client *client)
>> +{
>> + return client->dev.platform_data;
>> +}
>> +#endif
>> +
>> /**
>> * tvp514x_probe() - decoder driver i2c probe handler
>> * @client: i2c driver client device structure
>> @@ -941,6 +986,7 @@ static struct tvp514x_decoder tvp514x_dev = {
>> static int
>> tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
>> {
>> + struct tvp514x_platform_data *pdata;
>> struct tvp514x_decoder *decoder;
>> struct v4l2_subdev *sd;
>> int ret;
>> @@ -949,22 +995,25 @@ tvp514x_probe(struct i2c_client *client, const struct
>> i2c_device_id *id) if (!i2c_check_functionality(client->adapter,
>> I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO;
>>
>> + pdata = tvp514x_get_pdata(client);
>> + if (!pdata) {
>> + v4l2_err(client, "No platform data!!\n");
>> + return -EPROBE_DEFER;
>> + }
>> +
>> decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL);
>> if (!decoder)
>> return -ENOMEM;
>>
>> /* Initialize the tvp514x_decoder with default configuration */
>> *decoder = tvp514x_dev;
>> - if (!client->dev.platform_data) {
>> - v4l2_err(client, "No platform data!!\n");
>> - return -EPROBE_DEFER;
>> - }
>> +
>> /* Copy default register configuration */
>> memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default,
>> sizeof(tvp514x_reg_list_default));
>>
>> /* Copy board specific information here */
>> - decoder->pdata = client->dev.platform_data;
>> + decoder->pdata = pdata;
>>
>> /**
>> * Fetch platform specific data, and configure the
>> @@ -1096,6 +1145,7 @@ MODULE_DEVICE_TABLE(i2c, tvp514x_id);
>>
>> static struct i2c_driver tvp514x_driver = {
>> .driver = {
>> + .of_match_table = tvp514x_of_match,
>> .owner = THIS_MODULE,
>> .name = TVP514X_MODULE_NAME,
>> },
> --
> Regards,
>
> Laurent Pinchart
>
More information about the devicetree-discuss
mailing list