[PATCH 2/2] ARM: DT: tegra: Add Toradex Iris carrier board with T20 512MB COM

[Stephen Warren]

On 01/17/2013 04:59 AM, Lucas Stach wrote:
> This adds the device tree for the Toradex Iris carrier board used
> together with a Colibri T20 512MB COM.

> diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts

> +	board_regulators {

Similarly, name that node just regulators

> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;

Those properties will then already exist, so no need to duplicate them here.

> +		usb_host_vbus {

That would be regulator at 3

> +			compatible = "regulator-fixed";
> +			reg = <0>;

That reg = <3>;

(or start numbering the board entries at say 100 to leave room for
changes in the COM include file)

> +			regulator-name = "usb_host_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +			gpio = <&gpio 178 0>;
> +		};
> +
> +		vcc_sd_reg: regulator at 3 {
> +			compatible = "regulator-fixed";
> +			reg = <1>;

And the node name and reg property here would be 4.

> +			regulator-name = "vcc_sd";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +		};
> +	};
> +};

Oh and in patch 1, I noticed spaces after < or before >; could you
remove those while you're at it. Thanks.