[PATCH 6/7] ARM i.MX5: Add System Reset Controller (SRC) support for i.MX51 and i.MX53

[Philipp Zabel]

Hi Shawn,

thank you for your comments.

Am Donnerstag, den 17.01.2013, 14:12 +0800 schrieb Shawn Guo:
> On Wed, Jan 16, 2013 at 05:13:06PM +0100, Philipp Zabel wrote:
> > The SRC in i.MX51 and i.MX53 is similar to the one in i.MX6q minus
> > the IPU2 reset line and multi core CPU reset/enable bits.
> > 
> > Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> > ---
> >  arch/arm/mach-imx/Kconfig      |    1 +
> >  arch/arm/mach-imx/common.h     |    3 ++-
> >  arch/arm/mach-imx/mach-imx6q.c |    2 +-
> >  arch/arm/mach-imx/mm-imx5.c    |    2 ++
> >  arch/arm/mach-imx/src.c        |   14 +++++++++++++-
> >  5 files changed, 19 insertions(+), 3 deletions(-)
> > 
> > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> > index 3e628fd..d7924e5 100644
> > --- a/arch/arm/mach-imx/Kconfig
> > +++ b/arch/arm/mach-imx/Kconfig
> > @@ -829,6 +829,7 @@ config	SOC_IMX53
> >  	select ARCH_MX53
> >  	select HAVE_CAN_FLEXCAN if CAN
> >  	select IMX_HAVE_PLATFORM_IMX2_WDT
> > +	select HAVE_IMX_SRC
> 
> Please sort it in name.  Should we manage to have it selected for imx51
> too, since you have code added for imx51 below?

Yes, I'll add that.

> >  	select PINCTRL
> >  	select PINCTRL_IMX53
> >  	select SOC_IMX5
> > diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
> > index 7191ab4..f36be3c 100644
> > --- a/arch/arm/mach-imx/common.h
> > +++ b/arch/arm/mach-imx/common.h
> > @@ -133,7 +133,8 @@ static inline void imx_smp_prepare(void) {}
> >  #endif
> >  extern void imx_enable_cpu(int cpu, bool enable);
> >  extern void imx_set_cpu_jump(int cpu, void *jump_addr);
> > -extern void imx_src_init(void);
> > +extern void imx5_src_init(void);
> > +extern void imx6q_src_init(void);
> >  extern void imx_src_prepare_restart(void);
> >  extern void imx_gpc_init(void);
> >  extern void imx_gpc_pre_suspend(void);
> > diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
> > index cd277a0..b1e076c 100644
> > --- a/arch/arm/mach-imx/mach-imx6q.c
> > +++ b/arch/arm/mach-imx/mach-imx6q.c
> > @@ -229,7 +229,7 @@ static const struct of_device_id imx6q_irq_match[] __initconst = {
> >  static void __init imx6q_init_irq(void)
> >  {
> >  	l2x0_of_init(0, ~0UL);
> > -	imx_src_init();
> > +	imx6q_src_init();
> 
> I'm not sure this is necessary.  See below ...
> 
> >  	imx_gpc_init();
> >  	of_irq_init(imx6q_irq_match);
> >  }
> > diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
> > index 79d71cf..53f87be 100644
> > --- a/arch/arm/mach-imx/mm-imx5.c
> > +++ b/arch/arm/mach-imx/mm-imx5.c
> > @@ -106,6 +106,7 @@ void __init imx51_init_early(void)
> >  	mxc_set_cpu_type(MXC_CPU_MX51);
> >  	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
> >  	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
> > +	imx5_src_init();
> >  }
> >  
> >  void __init imx53_init_early(void)
> > @@ -113,6 +114,7 @@ void __init imx53_init_early(void)
> >  	mxc_set_cpu_type(MXC_CPU_MX53);
> >  	mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
> >  	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
> > +	imx5_src_init();
> >  }
> >  
> >  void __init mx50_init_irq(void)
> > diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
> > index 41687c6..e350250 100644
> > --- a/arch/arm/mach-imx/src.c
> > +++ b/arch/arm/mach-imx/src.c
> > @@ -125,7 +125,19 @@ void imx_src_prepare_restart(void)
> >  	writel_relaxed(0, src_base + SRC_GPR1);
> >  }
> >  
> > -void __init imx_src_init(void)
> > +void __init imx5_src_init(void)
> > +{
> > +	struct device_node *np;
> > +
> > +	np = of_find_compatible_node(NULL, NULL, "fsl,imx5-src");
> 
> In fsl,imx-src.txt, we have 
> 
>   compatible: Should be "fsl,<chip>-src"
> 
> But imx5 is not a chip name.  I would suggest we have the imx-src driver
> only look for compatible "fsl,imx51-src", and for dts
> 
>   imx51: compatible = "fsl,imx51-src";
>   imx53: compatible = "fsl,imx53-src", "fsl,imx51-src";
>   imx6q: compatible = "fsl,imx6q-src", "fsl,imx51-src";
> 
> so that we do not need imx5_src_init and imx6q_src_init which are
> basically doing the same thing.

So we should unconditionally clear the BP_SRC_SCR_WARM_RESET_ENABLE bit
on i.MX5, too? I'll try that.

> > +	src_base = of_iomap(np, 0);
> > +	WARN_ON(!src_base);
> 
> As imx51 still supports non-DT boot, we should have a check on np.
> If np is NULL, mostly likely it's a non-DT boot on imx51, and we
> should bail out instead of giving a fat warning.

Ok. I'll apply this and the comments from your other mails before
sending the next version.

regards
Philipp