[PATCH v4 1/4] rtc: OMAP: Add system pm_power_off to rtc driver

Russ Dill russ.dill at gmail.com
Fri Jan 11 19:54:46 EST 2013


On Fri, Jan 11, 2013 at 12:08 AM, Russ Dill <russ.dill at gmail.com> wrote:
> On Thu, Dec 13, 2012 at 10:03 PM, AnilKumar Ch <anilkumar at ti.com> wrote:
>> From: Colin Foe-Parker <colin.foeparker at logicpd.com>
>>
>> Add system power off control to rtc driver which is the in-charge
>> of controlling the BeagleBone system power. The power_off routine
>> can be hooked up to "pm_power_off" system call.
>>
>> System power off sequence:-
>> * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low
>> * Enable PMIC_POWER_EN in rtc module
>> * Set rtc ALARM2 time
>> * Enable ALARM2 interrupt
>>
>> Signed-off-by: Colin Foe-Parker <colin.foeparker at logicpd.com>
>> [anilkumar at ti.com: move poweroff additions to rtc driver]
>> Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
>
> Looks good
>
> Reviewed-by: Russ Dill <russ.dill at ti.com>
> Acked-by: Russ Dill <russ.dill at ti.com>

Sorry, actually, small follow up. Is there any reason this uses
readl/writel in some places rather than rtc_read/rtc_write?

>> ---
>>  Documentation/devicetree/bindings/rtc/rtc-omap.txt |    5 ++
>>  drivers/rtc/rtc-omap.c                             |   74 +++++++++++++++++++-
>>  2 files changed, 78 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
>> index b47aa41..8d9f4f9 100644
>> --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
>> +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
>> @@ -6,6 +6,10 @@ Required properties:
>>  - interrupts: rtc timer, alarm interrupts in order
>>  - interrupt-parent: phandle for the interrupt controller
>>
>> +Optional properties:
>> +- ti,system-power-controller: Telling whether or not rtc is controlling
>> +  the system power.
>> +
>>  Example:
>>
>>  rtc at 1c23000 {
>> @@ -14,4 +18,5 @@ rtc at 1c23000 {
>>         interrupts = <19
>>                       19>;
>>         interrupt-parent = <&intc>;
>> +       ti,system-power-controller;
>>  };
>> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
>> index 6009714..e6d4878 100644
>> --- a/drivers/rtc/rtc-omap.c
>> +++ b/drivers/rtc/rtc-omap.c
>> @@ -72,6 +72,14 @@
>>  #define OMAP_RTC_KICK0_REG             0x6c
>>  #define OMAP_RTC_KICK1_REG             0x70
>>
>> +#define OMAP_RTC_ALARM2_SECONDS_REG    0x80
>> +#define OMAP_RTC_ALARM2_MINUTES_REG    0x84
>> +#define OMAP_RTC_ALARM2_HOURS_REG      0x88
>> +#define OMAP_RTC_ALARM2_DAYS_REG       0x8c
>> +#define OMAP_RTC_ALARM2_MONTHS_REG     0x90
>> +#define OMAP_RTC_ALARM2_YEARS_REG      0x94
>> +#define OMAP_RTC_PMIC_REG              0x98
>> +
>>  /* OMAP_RTC_CTRL_REG bit fields: */
>>  #define OMAP_RTC_CTRL_SPLIT            (1<<7)
>>  #define OMAP_RTC_CTRL_DISABLE          (1<<6)
>> @@ -93,15 +101,21 @@
>>  #define OMAP_RTC_STATUS_BUSY            (1<<0)
>>
>>  /* OMAP_RTC_INTERRUPTS_REG bit fields: */
>> +#define OMAP_RTC_INTERRUPTS_IT_ALARM2   (1<<4)
>>  #define OMAP_RTC_INTERRUPTS_IT_ALARM    (1<<3)
>>  #define OMAP_RTC_INTERRUPTS_IT_TIMER    (1<<2)
>>
>> +/* OMAP_RTC_PMIC_REG bit fields: */
>> +#define OMAP_RTC_PMIC_POWER_EN_EN       (1<<16)
>> +
>>  /* OMAP_RTC_KICKER values */
>>  #define        KICK0_VALUE                     0x83e70b13
>>  #define        KICK1_VALUE                     0x95a4f1e0
>>
>>  #define        OMAP_RTC_HAS_KICKER             0x1
>>
>> +#define SHUTDOWN_TIME_SEC              2
>> +
>>  static void __iomem    *rtc_base;
>>
>>  #define rtc_read(addr)         readb(rtc_base + (addr))
>> @@ -290,6 +304,56 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
>>         return 0;
>>  }
>>
>> +/*
>> + * rtc_power_off: Set the pmic power off sequence. The RTC generates
>> + * pmic_pwr_enable control, which can be used to control an external
>> + * PMIC.
>> + */
>> +static void rtc_power_off(void)
>> +{
>> +       u32 val;
>> +       struct rtc_time tm;
>> +       unsigned long time;
>> +
>> +       /* Set PMIC power enable */
>> +       val = readl(rtc_base + OMAP_RTC_PMIC_REG);
>> +       writel(val | OMAP_RTC_PMIC_POWER_EN_EN, rtc_base + OMAP_RTC_PMIC_REG);
>> +
>> +       /* Read rtc time */
>> +       omap_rtc_read_time(NULL, &tm);
>> +
>> +       /* Convert Gregorian date to seconds since 01-01-1970 00:00:00 */
>> +       rtc_tm_to_time(&tm, &time);
>> +
>> +       /* Add shutdown time to the current value */
>> +       time += SHUTDOWN_TIME_SEC;
>> +
>> +       /* Convert seconds since 01-01-1970 00:00:00 to Gregorian date */
>> +       rtc_time_to_tm(time, &tm);
>> +
>> +       if (tm2bcd(&tm) < 0)
>> +               return;
>> +
>> +       pr_info("System will go to power_off state in approx. %d secs\n",
>> +                       SHUTDOWN_TIME_SEC);
>> +
>> +       /*
>> +        * pmic_pwr_enable is controlled by means of ALARM2 event. So here
>> +        * programming alarm2 expiry time and enabling alarm2 interrupt
>> +        */
>> +       rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG);
>> +       rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG);
>> +       rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG);
>> +       rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG);
>> +       rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG);
>> +       rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG);
>> +
>> +       /* Enable alarm2 interrupt */
>> +       val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG);
>> +       writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2,
>> +                               rtc_base + OMAP_RTC_INTERRUPTS_REG);
>> +}
>> +
>>  static struct rtc_class_ops omap_rtc_ops = {
>>         .read_time      = omap_rtc_read_time,
>>         .set_time       = omap_rtc_set_time,
>> @@ -327,12 +391,16 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
>>         struct resource         *res, *mem;
>>         struct rtc_device       *rtc;
>>         u8                      reg, new_ctrl;
>> +       bool                    pm_off = false;
>>         const struct platform_device_id *id_entry;
>>         const struct of_device_id *of_id;
>>
>>         of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
>> -       if (of_id)
>> +       if (of_id) {
>>                 pdev->id_entry = of_id->data;
>> +               pm_off = of_property_read_bool(pdev->dev.of_node,
>> +                                       "ti,system-power-controller");
>> +       }
>>
>>         omap_rtc_timer = platform_get_irq(pdev, 0);
>>         if (omap_rtc_timer <= 0) {
>> @@ -385,6 +453,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
>>         platform_set_drvdata(pdev, rtc);
>>         dev_set_drvdata(&rtc->dev, mem);
>>
>> +       /* RTC power off */
>> +       if (pm_off && !pm_power_off)
>> +               pm_power_off = rtc_power_off;
>> +
>>         /* clear pending irqs, and set 1/second periodic,
>>          * which we'll use instead of update irqs
>>          */
>> --
>> 1.7.9.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html


More information about the devicetree-discuss mailing list