[PATCH v6 0/4] Adding usb2.0 host-phy support for exynos5250

[Vivek Gautam]

Changes from v5:
 - Rebased on top of latest patches:
        usb: phy: samsung: Introducing usb phy driver for hsotg (v9)
        usb: phy: samsung: Add support to set pmu isolation (v6)
   As a result adding hostphy enable mask and hostphy register offsets
   to driver data in order to access the HOSTPHY CONTROL register.

 - Adding member 'otg' to struct samsung-usbphy so that its consumers
   can call otg->set_host so as to make 'phy' aware of the consumer type:
	HOST/DEVICE

 - Adding 'otg' to 'struct s5p_ehci_hcd' and 'struct exynos_ohci_hcd'
   which keeps track of 'otg' of the controllers' phy. This then sets
   the host.

 - Moved samsung_usbphy_set_type() calls from ehci-s5p and ohci-exynos
   to phy driver itself where based on phy_type it is called.

 - Added separate macro definition for USB20PHY_CFG register to select
   between host/device type usb link.

 - Removing unnecessary argument 'phy_type' from samsung_usbphy_set_type()
   and samsung_usbphy_cfg_sel().

 - Addressed few nits:
	-- added macro for 'KHZ'
	-- removing useless 'if' from samsung_usbphy_cfg_sel()
	-- keeping the place of clk_get intact and requesting driver
	   data before that.

Vivek Gautam (4):
  ARM: EXYNOS: Update & move usb-phy types to generic include layer
  usb: phy: samsung: Add host phy support to samsung-phy driver
  USB: ehci-s5p: Add phy driver support
  USB: ohci-exynos: Add phy driver support

 .../devicetree/bindings/usb/samsung-usbphy.txt     |   12 +-
 drivers/usb/host/ehci-s5p.c                        |   81 +++-
 drivers/usb/host/ohci-exynos.c                     |   85 +++-
 drivers/usb/phy/Kconfig                            |    2 +-
 drivers/usb/phy/samsung-usbphy.c                   |  512 ++++++++++++++++++--
 include/linux/usb/samsung_usb_phy.h                |   16 +
 6 files changed, 635 insertions(+), 73 deletions(-)
 create mode 100644 include/linux/usb/samsung_usb_phy.h

-- 
1.7.6.5