[PATCH v4 1/4] rtc: OMAP: Add system pm_power_off to rtc driver
AnilKumar, Chimata
anilkumar at ti.com
Fri Jan 11 20:30:03 EST 2013
On Fri, Jan 11, 2013 at 14:24:46, Russ Dill wrote:
> On Fri, Jan 11, 2013 at 12:08 AM, Russ Dill <russ.dill at gmail.com> wrote:
> > On Thu, Dec 13, 2012 at 10:03 PM, AnilKumar Ch <anilkumar at ti.com> wrote:
> >> From: Colin Foe-Parker <colin.foeparker at logicpd.com>
> >>
> >> Add system power off control to rtc driver which is the in-charge
> >> of controlling the BeagleBone system power. The power_off routine
> >> can be hooked up to "pm_power_off" system call.
> >>
> >> System power off sequence:-
> >> * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low
> >> * Enable PMIC_POWER_EN in rtc module
> >> * Set rtc ALARM2 time
> >> * Enable ALARM2 interrupt
> >>
> >> Signed-off-by: Colin Foe-Parker <colin.foeparker at logicpd.com>
> >> [anilkumar at ti.com: move poweroff additions to rtc driver]
> >> Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
> >
> > Looks good
> >
> > Reviewed-by: Russ Dill <russ.dill at ti.com>
> > Acked-by: Russ Dill <russ.dill at ti.com>
>
> Sorry, actually, small follow up. Is there any reason this uses
> readl/writel in some places rather than rtc_read/rtc_write?
Hi Russ Dill,
Thanks for the review
At OMAP_RTC_PMIC_POWER_EN_EN, 32-bit value needs to modified so
readl/writel are used. While enabling the INTERRUPTS we can change
it to rtc_read/rtc_write but I am not seeing any advantage if we
do that apart from consistency.
Thanks
AnilKumar
>
> >> ---
> >> Documentation/devicetree/bindings/rtc/rtc-omap.txt | 5 ++
> >> drivers/rtc/rtc-omap.c | 74 +++++++++++++++++++-
> >> 2 files changed, 78 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> >> index b47aa41..8d9f4f9 100644
> >> --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> >> +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> >> @@ -6,6 +6,10 @@ Required properties:
> >> - interrupts: rtc timer, alarm interrupts in order
> >> - interrupt-parent: phandle for the interrupt controller
> >>
> >> +Optional properties:
> >> +- ti,system-power-controller: Telling whether or not rtc is controlling
> >> + the system power.
> >> +
> >> Example:
> >>
> >> rtc at 1c23000 {
> >> @@ -14,4 +18,5 @@ rtc at 1c23000 {
> >> interrupts = <19
> >> 19>;
> >> interrupt-parent = <&intc>;
> >> + ti,system-power-controller;
> >> };
> >> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
> >> index 6009714..e6d4878 100644
> >> --- a/drivers/rtc/rtc-omap.c
> >> +++ b/drivers/rtc/rtc-omap.c
> >> @@ -72,6 +72,14 @@
> >> #define OMAP_RTC_KICK0_REG 0x6c
> >> #define OMAP_RTC_KICK1_REG 0x70
> >>
> >> +#define OMAP_RTC_ALARM2_SECONDS_REG 0x80
> >> +#define OMAP_RTC_ALARM2_MINUTES_REG 0x84
> >> +#define OMAP_RTC_ALARM2_HOURS_REG 0x88
> >> +#define OMAP_RTC_ALARM2_DAYS_REG 0x8c
> >> +#define OMAP_RTC_ALARM2_MONTHS_REG 0x90
> >> +#define OMAP_RTC_ALARM2_YEARS_REG 0x94
> >> +#define OMAP_RTC_PMIC_REG 0x98
> >> +
> >> /* OMAP_RTC_CTRL_REG bit fields: */
> >> #define OMAP_RTC_CTRL_SPLIT (1<<7)
> >> #define OMAP_RTC_CTRL_DISABLE (1<<6)
> >> @@ -93,15 +101,21 @@
> >> #define OMAP_RTC_STATUS_BUSY (1<<0)
> >>
> >> /* OMAP_RTC_INTERRUPTS_REG bit fields: */
> >> +#define OMAP_RTC_INTERRUPTS_IT_ALARM2 (1<<4)
> >> #define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3)
> >> #define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2)
> >>
> >> +/* OMAP_RTC_PMIC_REG bit fields: */
> >> +#define OMAP_RTC_PMIC_POWER_EN_EN (1<<16)
> >> +
> >> /* OMAP_RTC_KICKER values */
> >> #define KICK0_VALUE 0x83e70b13
> >> #define KICK1_VALUE 0x95a4f1e0
> >>
> >> #define OMAP_RTC_HAS_KICKER 0x1
> >>
> >> +#define SHUTDOWN_TIME_SEC 2
> >> +
> >> static void __iomem *rtc_base;
> >>
> >> #define rtc_read(addr) readb(rtc_base + (addr))
> >> @@ -290,6 +304,56 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
> >> return 0;
> >> }
> >>
> >> +/*
> >> + * rtc_power_off: Set the pmic power off sequence. The RTC generates
> >> + * pmic_pwr_enable control, which can be used to control an external
> >> + * PMIC.
> >> + */
> >> +static void rtc_power_off(void)
> >> +{
> >> + u32 val;
> >> + struct rtc_time tm;
> >> + unsigned long time;
> >> +
> >> + /* Set PMIC power enable */
> >> + val = readl(rtc_base + OMAP_RTC_PMIC_REG);
> >> + writel(val | OMAP_RTC_PMIC_POWER_EN_EN, rtc_base + OMAP_RTC_PMIC_REG);
> >> +
> >> + /* Read rtc time */
> >> + omap_rtc_read_time(NULL, &tm);
> >> +
> >> + /* Convert Gregorian date to seconds since 01-01-1970 00:00:00 */
> >> + rtc_tm_to_time(&tm, &time);
> >> +
> >> + /* Add shutdown time to the current value */
> >> + time += SHUTDOWN_TIME_SEC;
> >> +
> >> + /* Convert seconds since 01-01-1970 00:00:00 to Gregorian date */
> >> + rtc_time_to_tm(time, &tm);
> >> +
> >> + if (tm2bcd(&tm) < 0)
> >> + return;
> >> +
> >> + pr_info("System will go to power_off state in approx. %d secs\n",
> >> + SHUTDOWN_TIME_SEC);
> >> +
> >> + /*
> >> + * pmic_pwr_enable is controlled by means of ALARM2 event. So here
> >> + * programming alarm2 expiry time and enabling alarm2 interrupt
> >> + */
> >> + rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG);
> >> + rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG);
> >> + rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG);
> >> + rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG);
> >> + rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG);
> >> + rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG);
> >> +
> >> + /* Enable alarm2 interrupt */
> >> + val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG);
> >> + writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2,
> >> + rtc_base + OMAP_RTC_INTERRUPTS_REG);
> >> +}
> >> +
> >> static struct rtc_class_ops omap_rtc_ops = {
> >> .read_time = omap_rtc_read_time,
> >> .set_time = omap_rtc_set_time,
> >> @@ -327,12 +391,16 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
> >> struct resource *res, *mem;
> >> struct rtc_device *rtc;
> >> u8 reg, new_ctrl;
> >> + bool pm_off = false;
> >> const struct platform_device_id *id_entry;
> >> const struct of_device_id *of_id;
> >>
> >> of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
> >> - if (of_id)
> >> + if (of_id) {
> >> pdev->id_entry = of_id->data;
> >> + pm_off = of_property_read_bool(pdev->dev.of_node,
> >> + "ti,system-power-controller");
> >> + }
> >>
> >> omap_rtc_timer = platform_get_irq(pdev, 0);
> >> if (omap_rtc_timer <= 0) {
> >> @@ -385,6 +453,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
> >> platform_set_drvdata(pdev, rtc);
> >> dev_set_drvdata(&rtc->dev, mem);
> >>
> >> + /* RTC power off */
> >> + if (pm_off && !pm_power_off)
> >> + pm_power_off = rtc_power_off;
> >> +
> >> /* clear pending irqs, and set 1/second periodic,
> >> * which we'll use instead of update irqs
> >> */
> >> --
> >> 1.7.9.5
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> >> the body of a message to majordomo at vger.kernel.org
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the devicetree-discuss
mailing list