[PATCH 05/14] lib: Add I/O map cache implementation

[Thierry Reding]

On Thu, Jan 10, 2013 at 11:20:07AM -0700, Jason Gunthorpe wrote:
> On Thu, Jan 10, 2013 at 11:25:44AM +0100, Thierry Reding wrote:
> > On Thu, Jan 10, 2013 at 09:17:19AM +0000, Arnd Bergmann wrote:
> > > On Thursday 10 January 2013, Thierry Reding wrote:
> > > > On Wed, Jan 09, 2013 at 04:17:58PM -0700, Jason Gunthorpe wrote:
> > > > > On Wed, Jan 09, 2013 at 04:12:31PM -0700, Stephen Warren wrote:
> > > > > You could decrease the size of the mapping to only span the bus
> > > > > numbers that are configured for use via DT.
> > > > 
> > > > That won't work, unfortunately. The mapping is such that the bus number
> > > > is not encoded in the uppermost bits, the extended register number is.
> > > > So the only thing that we could do is decrease the size of the extended
> > > > register space for *all* devices.
> > > 
> > > But you could still a method to map 16 separate areas per bus, each 65536
> > > bytes long, which results in 1MB per bus. That is probably ok, since
> > > very few systems have more than a handful of buses in practice.
> > > 
> > > In theory, doing static mappings on a per-page base would let you
> > > do 16 devices at a time, but it's probably worth doing at this fine
> > > granularity.
> > 
> > I don't understand how this would help. The encoding is like this:
> > 
> > 	[27:24] extended register number
> > 	[23:16] bus number
> > 	[15:11] device number
> > 	[10: 8] function number
> > 	[ 7: 0] register number
> > 
> > So it doesn't matter whether I use separate areas per bus or not. As
> > soon as the whole extended configuration space needs to be accessed a
> > whopping 28 bits (256 MiB) are required.
> 
> You'd piece a mapping together, each bus requires 16 64k mappings, a
> simple 2d array of busnr*16 of pointers would do the trick. A more
> clever solution would be to allocate contiguous virtual memory and
> split that up..

Oh, I see. I'm not very familiar with the internals of remapping, so
I'll need to do some more reading. Thanks for the hints.

> > > Actually, AER probably needs this, and I believe some broken devices 
> > > need to mask interrupts using the PCI command word in the config space,
> > > it it can happen.
> > 
> > Ugh... that would kill any such dynamic mapping approach. Perhaps if we
> > could mark a device as requiring a static mapping we could pin that
> > cache entry. But that doesn't sound very encouraging.
> 
> AER applies to pretty much every PCI-E device these days.

So given there's no way around a segmented static mapping as you
suggested, right?

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20130110/71919eef/attachment.sig>