[PATCH 4/4] ARM i.MX53: dts: add oftree for MBa53 baseboard

Shawn Guo shawn.guo at linaro.org
Thu Jan 10 13:45:45 EST 2013


On Wed, Jan 09, 2013 at 02:44:25PM +0100, Steffen Trumtrar wrote:
> The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only
> supported devices, i.e. it is not feature complete, because of missing drivers
> in mainline linux.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> ---
>  arch/arm/boot/dts/Makefile        |    1 +
>  arch/arm/boot/dts/imx53-MBa53.dts |  146 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 147 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx53-MBa53.dts
> 
I do not like the CamelCase in filename, and do not want to be the first
one doing that in  arch/arm/boot/dts.

> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index e44da40..04b05e8 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
>  	imx53-evk.dtb \
>  	imx53-qsb.dtb \
>  	imx53-smd.dtb \
> +	imx53-MBa53.dtb \

Change it to lower case and sort it properly.

>  	imx6q-arm2.dtb \
>  	imx6q-sabreauto.dtb \
>  	imx6q-sabrelite.dtb \
> diff --git a/arch/arm/boot/dts/imx53-MBa53.dts b/arch/arm/boot/dts/imx53-MBa53.dts
> new file mode 100644
> index 0000000..39ecaeb
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx53-MBa53.dts
> @@ -0,0 +1,146 @@
> +/*
> + * Copyright 2012 Sascha Hauer <s.hauer at pengutronix.de>, Pengutronix
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +/include/ "imx53-tqma53.dtsi"
> +
> +/ {
> +	model = "TQ MBa53 starter kit";
> +	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
> +
> +	backlight_reg:fixed at 0 {

The node name is not good.  Also we generally have a space between
label and node names.

> +		compatible = "regulator-fixed";
> +		regulator-name = "lcd-supply";
> +		gpio = <&gpio2 5 0>;
> +		startup-delay-us = <5000>;
> +		enable-active-low;
> +        };

Use tab instead of space.

> +
> +	backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm2 0 50000 0 0>;
> +		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
> +		default-brightness-level = <10>;
> +		enable-gpios = <&gpio7 7 0>;
> +		power-supply = <&backlight_reg>;
> +        };

Ditto

Shawn



More information about the devicetree-discuss mailing list