[PATCH 1/5] capemgr: Beaglebone DT overlay based cape manager

[Tony Lindgren]

* Pantelis Antoniou <panto at antoniou-consulting.com> [130107 10:54]:
> A cape loader based on DT overlays and DT objects.
> 
> Beaglebone cape manager implementation.
> 
> Signed-off-by: Pantelis Antoniou <panto at antoniou-consulting.com>
> ---
>  arch/arm/mach-omap2/Kconfig            |    2 +
>  drivers/misc/Kconfig                   |    2 +
>  drivers/misc/Makefile                  |    1 +
>  drivers/misc/cape/Kconfig              |    5 +
>  drivers/misc/cape/Makefile             |    5 +
>  drivers/misc/cape/beaglebone/Kconfig   |   11 +
>  drivers/misc/cape/beaglebone/Makefile  |    5 +
>  drivers/misc/cape/beaglebone/capemgr.c | 1835 ++++++++++++++++++++++++++++++++

The driver should probably be in drivers/bus?

>  8 files changed, 1866 insertions(+)
>  create mode 100644 drivers/misc/cape/Kconfig
>  create mode 100644 drivers/misc/cape/Makefile
>  create mode 100644 drivers/misc/cape/beaglebone/Kconfig
>  create mode 100644 drivers/misc/cape/beaglebone/Makefile
>  create mode 100644 drivers/misc/cape/beaglebone/capemgr.c
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 41b581f..f0c2eab 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -18,6 +18,8 @@ config ARCH_OMAP2PLUS_TYPICAL
>  	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
>  	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
>  	select VFP
> +	select OF_OVERLAY
> +	select OF_RESOLVE
>  	help
>  	  Compile a kernel suitable for booting most boards

You should just make the driver depend on OF_OVERLAY and
OF_RESOLVE as most SoCs won't need this. Then we can select
it in the omap2plus_defconfig.

Regards,

Tony