[PATCH 1/6] ARM: sunxi: Add pinctrl driver for Allwinner SoCs

[Maxime Ripard]

Hi Linus,

Le 07/01/2013 00:46, Linus Walleij a écrit :
> On Wed, Dec 19, 2012 at 9:18 PM, Maxime Ripard
> <maxime.ripard at free-electrons.com> wrote:
> 
>> The Allwinner SoCs have an IP module that handle both the muxing and the
>> GPIOs.
> 
> Sorry for very slow review :-( :-(

That's fine, at that time of the year, I wasn't expecting a fast review
anyway :)

>>  include/linux/pinctrl/pinconf-generic.h            |    1 +
> 
> Can you break this into a separate patch and rebase it?
> 
> It does not apply anymore after v3.8...

Ah, yes, of course... Will do.

>> diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
>> index 4f0abb9..5f5968d 100644
>> --- a/include/linux/pinctrl/pinconf-generic.h
>> +++ b/include/linux/pinctrl/pinconf-generic.h
>> @@ -74,6 +74,7 @@ enum pin_config_param {
>>         PIN_CONFIG_DRIVE_PUSH_PULL,
>>         PIN_CONFIG_DRIVE_OPEN_DRAIN,
>>         PIN_CONFIG_DRIVE_OPEN_SOURCE,
>> +       PIN_CONFIG_DRIVE_CURRENT,
>>         PIN_CONFIG_INPUT_SCHMITT,
>>         PIN_CONFIG_INPUT_DEBOUNCE,
>>         PIN_CONFIG_POWER_SOURCE,
> 
> Above the definitions there is some kerneldoc and that is where this has to be
> defined.
> 
> You also have to defines what the argument to this parameter is.
> 
> I think it should be renamed PIN_CONFIG_DRIVE_STRENGTH and the
> argument should be the number of drivers stages.
> 
> These things are constructed with totem-pole-like outputs and the number
> of totempoles define the drive strength, usually it will be something like
> 
> 1 = 2mA
> 2 = 4mA
> 3 = 6mA
> 4 = 8mA
> 
> or similar, as you see 2 mA for each added driver stage. The driver can
> convert to any internal representation...

Ok, I will do it.

Do you have other comments on the driver that I should wait for before
sending a v3?

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com