[PATCH v2 10/10] video: da8xx-fb: fb_set_par support

[Afzal Mohammed]

fb_set_par helps in runtime configuration of lcd controller like
changing resolution, pixel clock etc. (eg. using fbset utility)

Reconfigure lcd controller based on information passed by framework.
Enable raster back if it was already enabled.

As fb_set_par would get invoked indirectly from probe via fb_set_var,
remove existing lcdc initialization in probe and do lcdc reset in
probe so that reset happens only at the begining.

Signed-off-by: Afzal Mohammed <afzal at ti.com>
---

v2: disable raster in fb_set_par properly as required, without this
    there would be no issue on DA850, but it will cause problem on AM335X

 drivers/video/da8xx-fb.c |   60 +++++++++++++++++++++++++++++++++++++---------
 1 file changed, 49 insertions(+), 11 deletions(-)

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index c7393f1..240eac7 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -247,6 +247,11 @@ static struct fb_videomode known_lcd_panels[] = {
 	},
 };
 
+static inline bool da8xx_fb_is_raster_enabled(void)
+{
+	return !!(lcdc_read(LCD_RASTER_CTRL_REG) & LCD_RASTER_ENABLE);
+}
+
 /* Enable the Raster Engine of the LCD Controller */
 static inline void lcd_enable_raster(void)
 {
@@ -669,9 +674,6 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 
 static void da8xx_fb_lcd_reset(void)
 {
-	/* Disable the Raster if previously Enabled */
-	lcd_disable_raster(false);
-
 	/* DMA has to be disabled */
 	lcdc_write(0, LCD_DMA_CTRL_REG);
 	lcdc_write(0, LCD_RASTER_CTRL_REG);
@@ -724,8 +726,6 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
 	u32 bpp;
 	int ret = 0;
 
-	da8xx_fb_lcd_reset();
-
 	da8xx_fb_calc_config_clk_divider(par, panel);
 
 	if (panel->sync & FB_SYNC_CLK_INVERT)
@@ -1205,9 +1205,52 @@ static int da8xx_pan_display(struct fb_var_screeninfo *var,
 	return ret;
 }
 
+static int da8xxfb_set_par(struct fb_info *info)
+{
+	struct da8xx_fb_par *par = info->par;
+	int ret;
+	bool raster = da8xx_fb_is_raster_enabled();
+
+	if (raster)
+		lcd_disable_raster(true);
+	else
+		lcd_disable_raster(false);
+
+	fb_var_to_videomode(&par->mode, &info->var);
+
+	par->cfg.bpp = info->var.bits_per_pixel;
+
+	info->fix.visual = (par->cfg.bpp <= 8) ?
+				FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
+	info->fix.line_length = (par->mode.xres * par->cfg.bpp) / 8;
+
+	ret = lcd_init(par, &par->cfg, &par->mode);
+	if (ret < 0) {
+		dev_err(par->dev, "lcd init failed\n");
+		return ret;
+	}
+
+	par->dma_start = info->fix.smem_start +
+			 info->var.yoffset * info->fix.line_length +
+			 info->var.xoffset * info->var.bits_per_pixel / 8;
+	par->dma_end   = par->dma_start +
+			 info->var.yres * info->fix.line_length - 1;
+
+	lcdc_write(par->dma_start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
+	lcdc_write(par->dma_end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
+	lcdc_write(par->dma_start, LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
+	lcdc_write(par->dma_end, LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
+
+	if (raster)
+		lcd_enable_raster();
+
+	return 0;
+}
+
 static struct fb_ops da8xx_fb_ops = {
 	.owner = THIS_MODULE,
 	.fb_check_var = fb_check_var,
+	.fb_set_par = da8xxfb_set_par,
 	.fb_setcolreg = fb_setcolreg,
 	.fb_pan_display = da8xx_pan_display,
 	.fb_ioctl = fb_ioctl,
@@ -1316,14 +1359,9 @@ static int __devinit fb_probe(struct platform_device *device)
 	}
 
 	fb_videomode_to_var(&da8xx_fb_var, lcdc_info);
-	fb_var_to_videomode(&par->mode, &da8xx_fb_var);
 	par->cfg = *lcd_cfg;
 
-	if (lcd_init(par, lcd_cfg, lcdc_info) < 0) {
-		dev_err(&device->dev, "lcd_init failed\n");
-		ret = -EFAULT;
-		goto err_release_fb;
-	}
+	da8xx_fb_lcd_reset();
 
 	/* allocate frame buffer */
 	par->vram_size = lcdc_info->xres * lcdc_info->yres * lcd_cfg->bpp;
-- 
1.7.9.5