[PATCH 0/2] ARM: davinci: da850: add pinctrl support

[Kumar, Anil]

Hi,

Gentle Ping. As there are no review comments on this patch series,
could you please pull this patch ?    

Thanks,
Anil

On Mon, Dec 17, 2012 at 09:56:45, Kumar, Anil wrote:
> Hi All,
> 
> As pinctrl-single is required for handling Pad configuration of various 
> DaVinci module(for e.g mcasp, i2c etc) with DT. Hence for this patch if
> there are no review comments, could you pull this patch ?
> 
> Thanks,
> Anil     
> 
> On Fri, Dec 07, 2012 at 15:57:29, Kumar, Anil wrote:
> > This set of patches adds:
> > 
> > * Add pinctrl-single for handling Padconf registers.
> > * Add NAND node to export NAND functionality on da850 EVM.
> > * Add NAND pinctrl node to do pin mux according to pinctrl-single driver.
> > 
> > Kumar, Anil (2):
> >   ARM: davinci: da850: add pinctrl driver entries
> >   ARM: davinci: da850: add NAND driver entries
> > 
> >  .../devicetree/bindings/arm/davinci/pinctrl.txt    |   29 ++++++++++++++++++++
> >  arch/arm/Kconfig                                   |    1 +
> >  arch/arm/boot/dts/da850-evm.dts                    |   22 +++++++++++++++
> >  arch/arm/boot/dts/da850.dtsi                       |   23 +++++++++++++++
> >  arch/arm/configs/da8xx_omapl_defconfig             |    1 +
> >  5 files changed, 76 insertions(+), 0 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/arm/davinci/pinctrl.txt
> > 
> > -- 
> > 1.7.4.1
> > 
> > 
> 
>