[PATCH v4 0/4] pm: Add power off control
AnilKumar, Chimata
anilkumar at ti.com
Wed Jan 2 21:15:14 EST 2013
On Fri, Dec 14, 2012 at 11:33:13, AnilKumar, Chimata wrote:
> Add PM power_off control to rtc driver and PMIC status is set to
> STATUS_OFF to shutdown PMIC if PWR_EN is toggled by RTC module.
>
> System power off sequence:-
> * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low
> * Enable PMIC_POWER_EN in rtc module
> * Set rtc ALARM2 time
> * Enable ALARM2 interrupt
>
> These patches were tested on am335x-bone (BeagleBone). These patchs
> are based on linux-next.
Hi All,
Happy New Year
Gentle ping to this series
Thanks
AnilKumar
> Changes from v3:
> - TPS65217 mfd driver changes are accepted so dropped
> from this series.
> - With recent changes in the kernel, reboot_mutex held BUG()
> is not seen so removed while(1); from rtc_power_off.
> - Removed spinlock before while(1); which is not necessary.
>
> Changes from v2:
> - Incorporated Kevin's comment on v2
> * Enabled RTC in ompa2plus_defconfig
>
> Changes from v1:
> - Incorporated Vaibhav's comments on v1
> * Changed the time rollover logic with the help of
> rtc-lib APIs
>
> AnilKumar Ch (3):
> ARM: dts: AM33XX: Set pmic-shutdown-controller for BeagleBone
> ARM: dts: AM33XX: Enable system power off control in am335x-bone
> ARM: OMAP2+: omap2plus_defconfig: Enable RTC support
>
> Colin Foe-Parker (1):
> rtc: OMAP: Add system pm_power_off to rtc driver
>
> Documentation/devicetree/bindings/rtc/rtc-omap.txt | 5 ++
> arch/arm/boot/dts/am335x-bone.dts | 6 ++
> arch/arm/configs/omap2plus_defconfig | 1 +
> drivers/rtc/rtc-omap.c | 74 +++++++++++++++++++-
> 4 files changed, 85 insertions(+), 1 deletion(-)
>
> --
> 1.7.9.5
>
>
More information about the devicetree-discuss
mailing list