[PATCH 1/2] Drivers: w1: mxc_w1, Add support for DT
Martin Fuzzey
mfuzzey at gmail.com
Sun Feb 24 22:37:17 EST 2013
Hi Markus,
I've already submitted basically this and it's in linux-next:
http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git;a=commitdiff;h=28c55dc1acc863cb29832b5be2464ebcdafdc3d5
Also:
+Example:
+ w1: w1 at 10009000 {
+ compatible = "fsl,imx27-w1";
+ reg = <0x10009000 0x1000>;
+ };
...
+struct of_device_id mxc_w1_of_ids[] = {
+ { .compatible = "fsl,imx21-w1", },
+ { /* sentinel */ }
+};
Isn't there a mismatch imx27 vs imx21 here?
Regards,
Martin
On Sat, Feb 23, 2013 at 6:35 PM, Markus Pargmann <mpa at pengutronix.de> wrote:
> Add devicetree support for mxc_w1 driver.
>
> Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
> ---
> Documentation/devicetree/bindings/w1/fsl,mxc-w1.txt | 13 +++++++++++++
> drivers/w1/masters/mxc_w1.c | 7 +++++++
> 2 files changed, 20 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/w1/fsl,mxc-w1.txt
>
> diff --git a/Documentation/devicetree/bindings/w1/fsl,mxc-w1.txt
> b/Documentation/devicetree/bindings/w1/fsl,mxc-w1.txt
> new file mode 100644
> index 0000000..686ced4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/w1/fsl,mxc-w1.txt
> @@ -0,0 +1,13 @@
> +Freescale driver for Dalla's 1-wire bus master on imx chips
> +
> +This driver supports imx21,27,31,35.
> +
> +Required properties:
> +- compatible : "fsl,<chip>-w1"
> +- reg : Should be the memory range.
> +
> +Example:
> + w1: w1 at 10009000 {
> + compatible = "fsl,imx27-w1";
> + reg = <0x10009000 0x1000>;
> + };
> diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
> index 708a25f..827ff7f 100644
> --- a/drivers/w1/masters/mxc_w1.c
> +++ b/drivers/w1/masters/mxc_w1.c
> @@ -186,9 +186,16 @@ static int mxc_w1_remove(struct platform_device *pdev)
> return 0;
> }
>
> +struct of_device_id mxc_w1_of_ids[] = {
> + { .compatible = "fsl,imx21-w1", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mxc_w1_of_ids);
> +
> static struct platform_driver mxc_w1_driver = {
> .driver = {
> .name = "mxc_w1",
> + .of_match_table = mxc_w1_of_ids,
> },
> .probe = mxc_w1_probe,
> .remove = mxc_w1_remove,
> --
> 1.8.1.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20130224/b3758bba/attachment.html>
More information about the devicetree-discuss
mailing list