[PATCH 7/7] ARM: dts: Add Samsung G2D DT bindings documentation

[Tomasz Figa]

Hi Sachin,

On Wednesday 06 of February 2013 17:21:17 Sachin Kamat wrote:
> Added documentaion about G2D bindings.
> 
> Signed-off-by: Sachin Kamat <sachin.kamat at linaro.org>
> ---
>  .../devicetree/bindings/gpu/samsung-g2d.txt        |   30
> ++++++++++++++++++++ 1 files changed, 30 insertions(+), 0 deletions(-)
>  create mode 100644
> Documentation/devicetree/bindings/gpu/samsung-g2d.txt
> 
> diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt
> b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt new file mode
> 100644
> index 0000000..838b26b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt
> @@ -0,0 +1,30 @@
> +* Samsung 2D Graphics Accelerator
> +
> +Samsung FIMG2D is a 2D graphics accelerator which supports Bit Block
> Transfer. +We set the drawing-context registers for configuring the
> rendering parameters +and then start rendering.
> +The G2D has V4L2 as well as DRM framework based driver support.
> +
> +Required properties:
> +  - compatible : value should be one among the following
> +	(a) "samsung,s5pv210-g2d" for G2D IP present in S5PV210 & Exynos4210
> SoC +	(b) "samsung,exynos4212-g2d" for G2D IP present in Exynos4x12
> SoCs +	(b) "samsung,exynos5250-g2d" for G2D IP present in Exynos5250
> SoC +
> +  - reg : Physical base address of the IP registers and length of
> memory +	  mapped region.
> +
> +  - interrupts : G2D interrupt number to the CPU.
> +
> +Optional properties:
> +  - samsung,power-domain : power-domain property defined with a phandle
> +			   to respective power domain.

I'm not sure if samsung,power-domain should be mentioned in this 
documentation file. The driver itself does not use this property.

Otherwise looks fine.

Best regards,
Tomasz

> +
> +Example:
> +	g2d at 12800000 {
> +		compatible = "samsung,s5pv210-g2d";
> +		reg = <0x12800000 0x1000>;
> +		interrupts = <0 89 0>;
> +		samsung,power-domain = <&pd_lcd0>;
> +		status = "disabled";
> +	};