Reg:Trying to get the ADC working on the Beaglebone with 3.8 kernel
Anil Kumar
anilk4.v at gmail.com
Wed Feb 13 00:39:57 EST 2013
Hi Vijay,
On Tue, Feb 12, 2013 at 6:49 PM, Vijay S <vijay at mistralsolutions.com> wrote:
> Hi,
>
> Am trying to get the ADC working on the beagle bone. Have cloned/pulled the
> latest kernel from the following branch
> https://github.com/beagleboard/kernel/tree/3.8 , applied the patches and
> built the kernel.
>
>
>
> Have included the below structure under the am335x-bone-common.dtsi
> (attached herewith is the dts file for your reference)
>
>
>
> tscadc at 44e0d000 {
>
> status = "okay";
>
> compatible = "ti,ti-tscadc";
>
> reg = <0x44e0d000 0x1000>;
>
> interrupt-parent = <&intc>;
>
> interrupts = <16>;
>
> ti,hwmods = "adc_tsc";
>
> };
>
>
>
> &tscadc {
>
> tsc {
>
> ti,wires = <4>;
>
> ti,x-plate-resistance = <200>;
>
> ti,steps-to-configure = <5>;
>
> ti,wire-config = <0x00 0x11 0x22 0x33>;
>
> };
>
>
>
> adc {
>
> ti,adc-channels = <8>;
>
> };
>
have you done pin mux for this ?
>
>
>
>
> The device is getting registered( [1.578678] input: ti-tsc as
> /devices/ocp.2/44e0d000.tscadc/tsc/input/input0
>
> [ 1.586799] tsc tsc: Initialized OK) as can be seen from the attached
> kernel log(3.8_kernel_ts_adc_sys_iio_devices.txt).
>
>
>
> Am able to view the "tiadc" under the devices in the following path cat
> /sys/devices/ocp.2/44e0d000.tscadc/tiadc/iio\:device0/ and cat
> /sys/bus/iio/devices/iio\:device0/ , but am not able to list out
> "in_voltageX_raw" in either of the paths.
>
>
>
> Can you please suggest if am missing anything?
>
>
>
> Regards,
>
> Vijay
>
>
>
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
>
More information about the devicetree-discuss
mailing list