Sound record on Devkit8000 with DT boot issue

[Anil Kumar]

Hi Peter,

Thanks for helping me. please see my comment inline

On Mon, Feb 11, 2013 at 6:47 PM, Peter Ujfalusi <peter.ujfalusi at ti.com> wrote:
> On 02/10/2013 04:21 PM, Anil Kumar wrote:
>> Hi All,
>>
>> I am working on Devkit8000 and adding DT support for that. I am trying
>> to add sound DT node support for this boards.
>> I have nearly done with this but facing issue on record. I do not have
>> much knowledge of twl4030 audio codec but with
>> small Hack[1] (as MainMic connected to the input jack)  i am able to
>> record sound on Devkit8000.
>> I do not know that MICBIAS1_EN can be enable by amixer commands.
>> Could you please help me to get out of this ?
>
> You need to pass the routing information via DT for Devkit8000. This is not
> done for the BeagleBoard since it works without it (no need for MICBIAS for
> example)
>
>>
>>
>> 1) Hack [1]
>>
>> diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
>> index 63b280b..6780681 100644
>> --- a/sound/soc/codecs/twl4030.c
>> +++ b/sound/soc/codecs/twl4030.c
>> @@ -1473,7 +1473,7 @@ static const struct snd_soc_dapm_widget
>> twl4030_dapm_widgets[] = {
>>         SND_SOC_DAPM_SUPPLY("micbias2 select", TWL4030_REG_MICBIAS_CTL, 6, 0,
>>                             NULL, 0),
>>
>> -       SND_SOC_DAPM_MICBIAS("Mic Bias 1", TWL4030_REG_MICBIAS_CTL, 0, 0),
>> +       SND_SOC_DAPM_MICBIAS("Mic Bias 1", TWL4030_REG_MICBIAS_CTL, 0, 1),
>
> Yes, this is HACK and it is wrong at the same time.

Agree

>
>>         SND_SOC_DAPM_MICBIAS("Mic Bias 2", TWL4030_REG_MICBIAS_CTL, 1, 0),
>>         SND_SOC_DAPM_MICBIAS("Headset Mic Bias", TWL4030_REG_MICBIAS_CTL, 2, 0),
>>
>>
>> 2) Sound DT node patch for Devkit8000
>>
>> diff --git a/arch/arm/boot/dts/omap3-
>> devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
>> index dc59272..5f3eec0 100644
>> --- a/arch/arm/boot/dts/omap3-devkit8000.dts
>> +++ b/arch/arm/boot/dts/omap3-devkit8000.dts
>> @@ -44,11 +44,22 @@
>>                  };
>>
>>         };
>> +
>> +       sound {
>> +               compatible = "ti,omap-twl4030";
>> +               ti,model = "devkit8000";
>> +
>> +               ti,mcbsp = <&mcbsp2>;
>> +               ti,codec = <&twl_audio>;
>
> Here you should have something like:
> ti,audio-routing =
>         "Ext Spk", "PREDRIVEL",
>         "Ext Spk", "PREDRIVER",
>         "MAINMIC", "Main Mic",
>         "Main Mic", "Mic Bias 1";
>
> So you connect the MicBias1 to Main Mic. When you start playback MicBias1 will
> be turned on for you.

I tried with this routing (next-20130211 tag kernel). But it is not
working for me.
So i have gone through other board and found snd_soc_dapm_route for

1) zoom2.c
       {"MAINMIC", NULL, "Mic Bias 1"},
       {"Mic Bias 1", NULL, "Ext Mic"},

2) omap3pandora.c
        {"MAINMIC", NULL, "Mic Bias 1"},
        {"Mic Bias 1", NULL, "Mic (internal)"},

But for omap-twl4030.c it is
        {"MAINMIC", NULL, "Main Mic"},
        {"Main Mic", NULL, "Mic Bias 1"},

 It Should will be as ?
        {"MAINMIC", NULL, "Mic Bias 1"},
        {"Mic Bias 1", NULL, "Main Mic"},

Because with this i am able to get audio on Devkit8000 as
             ti,audio-routing =
                        "Ext Spk", "PREDRIVEL",
                        "Ext Spk", "PREDRIVER",
                        "MAINMIC", "Mic Bias 1",
                        "Mic Bias 1", "Main Mic";

Sorry if i am saying nonsense.

Thanks,
Anil
[...]