RFC: Static memory controller node description

[Grant Likely]

On Thu, 10 Jan 2013 16:40:09 +0100, Michal Simek <monstr at monstr.eu> wrote:
> Hi guys,
> 
> we want to add static memory controller driver for xilinx zynq to the
> linux kernel. (It will go to drivers/memory/ folder)
> Just need to clear dts fragment which describe it.
> 
> It is compatible with pl353 with 2 interfaces when only one interface
> can be used.
> Nand, nor and sram memories are supported. Driver will do additional
> setup for NAND and power management.
> 
> I am using extended compatible property based on
> Documentation/devicetree/bindings/arm/primecell.txt. Is it correct?
> 
> Nand case (we have special driver for nand) - interrupts are used only
> in connection with nand.
> 
> smc at 0xe000e000 {
> 	#address-cells = <1>;
> 	#size-cells = <1>;
> 	compatible = "xlnx,ps7-smc", "arm,pl353", "arm,primecell";
> 	reg = <0xe000e000 0x1000>;
> 	interrupts = <0 18 4>;
> 	interrupt-parent = <&ps7_scugic_0>;
> 	ranges;
> 	nand at e1000000 {
> 		compatible = "xlnx,ps7-nand-1.00.a";
> 		reg = <0xe1000000 0x1000000>;
> 		xlnx,nand-width = <16>;
> 	}
> }
> 
> or this one for NOR
> 
> smc at 0xe000e000 {
> 	#address-cells = <1>;
> 	#size-cells = <1>;
> 	compatible = "xlnx,ps7-smc", "arm,pl353", "arm,primecell";
> 	reg = <0xe000e000 0x1000>;
> 	ranges;
> 	nor: nor at e2000000 {
> 		compatible = "cfi-flash";
> 		reg = <0xE2000000 0x2000000>;
> 		bank-width = <1>;
> 	}
> }
> 
> Can you see any problem with these dts fragments?

Looks fine to me.

g.