Heads up on a device tree change

[James Hogan]

On 06/02/13 14:28, Grant Likely wrote:
> On Wed, Feb 6, 2013 at 1:32 PM, James Hogan <james.hogan at imgtec.com> wrote:
>> On 06/02/13 13:11, Grant Likely wrote:
>>> - Resources on platform_devices get registered so they appear in
>>> /proc/iomem and /proc/ioports and so that device drivers get the added
>>> protection of request_region. This will cause breakage on device trees
>>> nodes with partially overlapping memory regions. (ie. 0x100..0x1ff and
>>> 0x180..0x27f). I also have a workaround for this, but I doubt that it
>>> will be necessary.
>>
>> Hi Grant,
>>
>> If I understand you correctly, the non-overlapping memory regions thing
>> could be a problem for me. We have a Meta based SoC that has various SoC
>> registers grouped together for doing GPIOs and Pin control things. I'm
>> still in the process of converting it to device tree, but the way I've
>> been handling it is to provide overlapping registers to both the gpio
>> and pinctl DT nodes. Each GPIO bank's registers are also interleaved
>> with the others, so I've been providing overlapping register ranges
>> (offset by 4 for each bank) to the DT node for each gpio bank too, so
>> each bank can function independently and the driver doesn't have to
>> worry about multiple banks. Does that sound like a reasonable use case?
>>
>> I guess I could cheat with the length, or specify each register in it's
>> own memory resource, but it seems like overkill.
> 
> Note that overlapping regions are fine /provided/ that they are the
> same size or one fits nicely inside another. It's partial overlap that
> is a problem

It still feels a bit artificial to impose that limitation on something
that is supposed to be implementation independent. Having said that it
doesn't particularly bother me having to work around it.

> 
> I've been thinking about your exact problem though and I think the
> best way to handle it is for the gpio driver to understand multiple
> banks.

Something like this works quite nicely for me and keeps the driver code
nice and simple (iterates over children a bit like I2C, no need for
gpio-cells=3). I'd welcome comments:

		gpios: gpios at 02005800 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "img,tz1090-gpio";
			reg = <0x02005800 0x90>;

			gpios0: bank at 0 {
				#gpio-cells = <2>;
				#interrupt-cells = <2>;
				reg = <0>;
				interrupts = <13 4 /* level */>;
				gpio-controller;
				gpio-ranges = <&pinctrl 0 30>;
				interrupt-controller;
			};
			gpios1: bank at 1 {
				#gpio-cells = <2>;
				#interrupt-cells = <2>;
				reg = <1>;
				interrupts = <14 4 /* level */>;
				gpio-controller;
				gpio-ranges = <&pinctrl 30 30>;
				interrupt-controller;
			};
			gpios2: bank at 2 {
				#gpio-cells = <2>;
				#interrupt-cells = <2>;
				reg = <2>;
				interrupts = <15 4 /* level */>;
				gpio-controller;
				gpio-ranges = <&pinctrl 60 30>;
				interrupt-controller;
			};
		};

Cheers
James