[PATCH 2/5] ARM: dts: exynos5250-arndale: Add PMIC node entry
Kumar, Anil
anilkumar.v at ti.com
Thu Feb 7 16:49:39 EST 2013
On Thu, Feb 07, 2013 at 10:45:26, Tushar Behera wrote:
> From: Amit Daniel Kachhap <amit.daniel at samsung.com>
>
> Added S5M8767 PMIC DT nodes to Arndale board.
>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel at samsung.com>
> Signed-off-by: Sachin Kamat <sachin.kamat at linaro.org>
> Signed-off-by: Tushar Behera <tushar.behera at linaro.org>
> ---
> arch/arm/boot/dts/exynos5250-arndale.dts | 213 +++++++++++++++++++++++++++++-
> 1 files changed, 212 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> index 9ce40df..b40a02f 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -25,7 +25,218 @@
> };
>
> i2c at 12C60000 {
> - status = "disabled";
> + status = "okay";
Is there any need to change status "okay" here as in dtsi file it is
by default okay ?
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <20000>;
> + samsung,i2c-slave-addr = <0x66>;
> + gpios = <&gpb3 0 2 3 0>,
> + <&gpb3 1 2 3 0>;
> +
> + s5m8767_pmic at 66 {
> + compatible = "samsung,s5m8767-pmic";
> + reg = <0x66>;
> +
> + s5m8767,pmic-buck2-dvs-voltage = <1300000>;
> + s5m8767,pmic-buck3-dvs-voltage = <1100000>;
> + s5m8767,pmic-buck4-dvs-voltage = <1200000>;
> + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 1 0 0>,
> + <&gpd1 1 1 0 0>,
> + <&gpd1 2 1 0 0>;
> + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>,
> + <&gpx2 4 1 0 0>,
> + <&gpx2 5 1 0 0>;
> + regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "VDD_ALIVE_1.0V";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <1>;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "VDD_28IO_DP_1.35V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "VDD_COMMON1_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo4_reg: LDO4 {
> + regulator-name = "VDD_IOPERI_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "VDD_EXT_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "VDD_MPLL_1.1V";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "VDD_XPLL_1.1V";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "VDD_COMMON2_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo9_reg: LDO9 {
> + regulator-name = "VDD_33ON_3.0V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "VDD_COMMON3_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "VDD_ABB2_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "VDD_USB_3.0V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "VDDQ_C2C_W_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "VDD18_ABB0_3_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "VDD10_COMMON4_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "VDD18_HSIC_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "VDDQ_MMC2_3_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + ldo18_reg: LDO18 {
> + regulator-name = "VDD_33ON_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "VDD_MIF_1.2V";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <1>;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <925000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <1>;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "VDD_INT_1.0V";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <1>;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "VDD_G3D_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + op_mode = <1>;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "VDD_MEM_1.35V";
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1355000>;
> + regulator-always-on;
> + regulator-boot-on;
> + op_mode = <1>;
> + };
> +
> + };
> + };
> };
>
> i2c at 12C70000 {
> --
> 1.7.4.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
More information about the devicetree-discuss
mailing list