[PATCH] net: sh_eth: Add support of device tree probe

[Kuninori Morimoto]

Hi Iwamatsu-san

> >> +Required properties:
> >> +- compatible:                   "renesas,sh-eth";
> >> +- interrupt-parent:             The phandle for the interrupt controller that
> >> +                                services interrupts for this device.
> >> +- reg:                          Offset and length of the register set for the
> >> +                                device.
> >> +- interrupts:                   Interrupt mapping for the sh_eth interrupt
> >> +                                sources (vector id).
> >> +- phy-mode:              String, operation mode of the PHY interface.
> >> +- sh-eth,edmac-endian:          String, endian of sh_eth dmac.
> >
> > I believe endian is only little/big.
> > It can be "bool" settings, not "string" ?
> >
> 
> If we use bool , we may use this as "sh-eth,edmac-endian-big" or
> sh-eth,edmac-endian-little.
> Or we define big-endian, and when using big-endian, we specify this.
> Either way is okay.

Sorry, if it means

"we define big-endian as default settings,
and user can select little-endian by using sh-eth,edmac-little-endian"

then, it is nice.
Then, it can be "Option" properties.

> >> +- sh-eth,endian:                String, endian of sh_eth dmac.
> >
> > Is this really used it in this driver ?
> >
> 
> Yes. In many cases, this uses little-endian, but user may specify
> big-endian, I think.

I meant that I could find "sh-eth,edmac-endian" operation,
but, couldn't find "sh-eth,endian" operation on sh_eth_parse_dt()
and on Example either.

Best regards
---
Kuninori Morimoto