[PATCH RESEND] media: rc: gpio-ir-recv: add support for device tree parsing

Sylwester Nawrocki s.nawrocki at samsung.com
Thu Feb 7 00:48:52 EST 2013


Hi,

On 02/06/2013 09:03 AM, Sebastian Hesselbarth wrote:
> This patch adds device tree parsing for gpio_ir_recv platform_data and
> the mandatory binding documentation. It basically follows what we already
> have for e.g. gpio_keys. All required device tree properties are OS
> independent but optional properties allow linux specific support for rc
> protocols and maps.
> 
> There was a similar patch sent by Matus Ujhelyi but that discussion
> died after the first reviews.
> 
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
> ---
...
> diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
> new file mode 100644
> index 0000000..937760c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
> @@ -0,0 +1,20 @@
> +Device-Tree bindings for GPIO IR receiver
> +
> +Required properties:
> +	- compatible = "gpio-ir-receiver";
> +	- gpios: OF device-tree gpio specification.
> +
> +Optional properties:
> +	- linux,allowed-rc-protocols: Linux specific u64 bitmask of allowed
> +	    rc protocols.

You likely need to specify in these bindings documentation which bit 
corresponds to which RC protocol.

I'm not very familiar with the RC internals, but why it has to be
specified statically in the device tree, when decoding seems to be
mostly software defined ? I might be missing something though..

Couldn't this be configured at run time, with all protocols allowed
as the default ?

> +	- linux,rc-map-name: Linux specific remote control map name.
> +
> +Example node:
> +
> +	ir: ir-receiver {
> +		compatible = "gpio-ir-receiver";
> +		gpios = <&gpio0 19 1>;
> +		/* allow rc protocols 1-4 */
> +		linux,allowed-rc-protocols = <0x00000000 0x0000001e>;
> +		linux,rc-map-name = "rc-rc6-mce";
> +	};
> diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c
> index 4f71a7d..25e09fa 100644
> --- a/drivers/media/rc/gpio-ir-recv.c
> +++ b/drivers/media/rc/gpio-ir-recv.c
> @@ -16,6 +16,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/gpio.h>
>  #include <linux/slab.h>
> +#include <linux/of_gpio.h>
>  #include <linux/platform_device.h>
>  #include <linux/irq.h>
>  #include <media/rc-core.h>
> @@ -30,6 +31,63 @@ struct gpio_rc_dev {
>  	bool active_low;
>  };
>  
> +#ifdef CONFIG_OF
> +/*
> + * Translate OpenFirmware node properties into platform_data
> + */
> +static struct gpio_ir_recv_platform_data *
> +gpio_ir_recv_get_devtree_pdata(struct device *dev)
> +{
> +	struct device_node *np = dev->of_node;
> +	struct gpio_ir_recv_platform_data *pdata;
> +	enum of_gpio_flags flags;
> +	int gpio;
> +
> +	if (!np)
> +		return ERR_PTR(-ENODEV);
> +
> +	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata)
> +		return ERR_PTR(-ENOMEM);
> +
> +	if (!of_find_property(np, "gpios", NULL)) {

Why do you need this ? Isn't of_get_gpio_flags() sufficient ?

> +		dev_err(dev, "Found gpio-ir-receiver without gpios\n");
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	gpio = of_get_gpio_flags(np, 0, &flags);
> +	if (gpio < 0) {
> +		if (gpio != -EPROBE_DEFER)
> +			dev_err(dev, "Failed to get gpio flags, error: %d\n",
> +				gpio);
> +		return ERR_PTR(gpio);
> +	}
> +
> +	pdata->gpio_nr = gpio;
> +	pdata->active_low = (flags & OF_GPIO_ACTIVE_LOW) ? true : false;
> +	pdata->map_name = of_get_property(np, "linux,rc-map-name", NULL);
> +	of_property_read_u64(np, "linux,allowed-rc-protocols",
> +			     &pdata->allowed_protos);
> +
> +	return pdata;
> +}
> +
> +static struct of_device_id gpio_ir_recv_of_match[] = {
> +	{ .compatible = "gpio-ir-receiver", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, gpio_ir_recv_of_match);
> +
> +#else /* !CONFIG_OF */
> +
> +static inline struct gpio_ir_recv_platform_data *
> +gpio_ir_recv_get_devtree_pdata(struct device *dev)
> +{
> +	return ERR_PTR(-ENODEV);
> +}
> +
> +#endif
> +
>  static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
>  {
>  	struct gpio_rc_dev *gpio_dev = dev_id;
> @@ -66,8 +124,11 @@ static int gpio_ir_recv_probe(struct platform_device *pdev)
>  					pdev->dev.platform_data;
>  	int rc;
>  
> -	if (!pdata)
> -		return -EINVAL;
> +	if (!pdata) {
> +		pdata = gpio_ir_recv_get_devtree_pdata(&pdev->dev);

Could assigning to pdev->dev.platform_data be avoided here ?

platform_data is only referenced in probe(), so maybe something like
this would be better:

	const struct gpio_ir_recv_platform_data *pdata = NULL;

	if (pdev->dev.of_node) {
		ret = gpio_ir_recv_parse_dt(&pdev->dev, &pdata);
		if (ret < 0)
			return ret;
	} else {
		pdata = pdev->dev.platform_data;
	}
	if (!pdata)
		return -EINVAL;

> +		if (IS_ERR(pdata))
> +			return PTR_ERR(pdata);
> +	}
>  
>  	if (pdata->gpio_nr < 0)
>  		return -EINVAL;
> @@ -195,6 +256,9 @@ static struct platform_driver gpio_ir_recv_driver = {
>  #ifdef CONFIG_PM
>  		.pm	= &gpio_ir_recv_pm_ops,
>  #endif
> +#ifdef CONFIG_OF
> +		.of_match_table = of_match_ptr(gpio_ir_recv_of_match),
> +#endif

There is not need for #ifdef here, of_match_ptr() macro was introduced
just to allow to omit #ifdefs.

>  	},
>  };
>  module_platform_driver(gpio_ir_recv_driver);
> 

--

Thanks,
Sylwester


More information about the devicetree-discuss mailing list