[PATCH RFC 1/1] gpio: mcp23s08: convert driver to DT

[Grant Likely]

On Thu, 31 Jan 2013 21:51:36 +0100, Linus Walleij <linus.walleij at linaro.org> wrote:
> On Thu, Jan 31, 2013 at 4:58 PM, Lars Poeschel <larsi at wh2.tu-dresden.de> wrote:
> 
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
> > @@ -0,0 +1,27 @@
> > +Microchip MCP2308/MCP23S08/MCP23017/MCP23S17 driver for
> > +8-/16-bit I/O expander with serial interface (I2C/SPI)
> > +
> > +Required properties:
> > +- compatible : Should be "mcp,mcp23s08-gpio", "mcp,mcp23s17-gpio",
> > +                       "mcp,mcp23008-gpio" or "mcp,mcp23017-gpio"
> > +- base : The first gpio number that should be assigned by this chip.
> 
> No. We do not tie the global GPIO numbers into the device tree.
> 
> In the DT GPIOs are referenced by ampersand <&gpio0 1 2>
> notation referring to the instance, so as you realize DT itself
> has no need for that number.
> 
> Further it is not OS-neutral.
> 
> You have to find another way to handle this in the driver code.
> In worst case: use AUXDATA.

Hi Lars,

The trick is to declare the io expander to be a "gpio-controller" and
use the #gpio-cells property to declare how many cells (32-bit numbers)
are need to specify a single gpio line. Most gpio controllers use
"gpio-cells=<2>"; The first cell is the *controller local* gpio
number, and the second cell is used for flags. That way your gpio
controller can be referenced by other nodes in the tree with a "gpios"
property.

You can find lots of examples of this in the tree.

g.