[PATCH v3 0/2] ARM: Exynos5250: Enabling samsung usb phy

[Vivek Gautam]

Based on for-next of 'linux-samsung' tree.

Aligned with following patches for separate PHY drivers for USB 2.0 and
USB 3.0 for Samsung SoCs.
[PATCH v5 1/2] usb: phy: samsung: Common out the generic stuff
[PATCH v5 2/2] usb: phy: samsung: Add PHY support for USB 3.0 controller

Changes from v2:
 - Putting device nodes in order of device addresses.

Changes from v1:
 - Putting separate device nodes for usb 2.0 phy and usb 3.0 phy
   based on separate driver for samsung usb 3.0 phy and
   samsung usb 2.0 phy:
   [PATCH v3 0/2] Adding USB 3.0 DRD-phy support for exynos5250
   [PATCH v8 0/4] Adding usb2.0 host-phy support for exynos5250
 - Aligning as per the patch:
   usb: phy: samsung: Add support to set pmu isolation
 - Replaced phy-handle approach for PHY CONTROL registers
   to child nodes.
 - Removing AUX data entry from exynos5250 dt file.

Vivek Gautam (2):
  ARM: Exynos5250: Enabling samsung-usb2phy driver
  ARM: Exynos5250: Enabling samsung-usb3phy driver

 arch/arm/boot/dts/exynos5250.dtsi |   25 +++++++++++++++++++++++++
 1 files changed, 25 insertions(+), 0 deletions(-)

-- 
1.7.6.5