[PATCH 09/13] mfd: omap-usb-host: Add device tree support and binding information

Roger Quadros rogerq at ti.com
Tue Feb 5 02:58:56 EST 2013


Allows the OMAP HS USB host controller to be specified
via device tree.

CC: Samuel Ortiz <sameo at linux.intel.com>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
 .../devicetree/bindings/mfd/omap-usb-host.txt      |   68 ++++++++++++++++
 drivers/mfd/omap-usb-host.c                        |   83 ++++++++++++++++++--
 2 files changed, 145 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/omap-usb-host.txt

diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
new file mode 100644
index 0000000..2196893
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
@@ -0,0 +1,68 @@
+OMAP HS USB Host
+
+Required properties:
+
+- compatible: should be "ti,usbhs-host"
+- reg: should contain one register range i.e. start and length
+- ti,hwmods: must contain "usb_host_hs"
+
+Optional properties:
+
+- nports: number of USB ports. Usually this is automatically detected
+  from the IP's revision register but can be overridden by specifying
+  this property.
+
+- portN_mode: Integer specifying the port mode for port N, where N can be
+  from 1 to nports. The port mode must be as per enum usbhs_omap_port_mode
+  in include/linux/platform_data/usb-omap.h
+  If the port mode is not specified, that port is treated as unused.
+
+- single_ulpi_bypass: Must be present if the controller contains a single
+  ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
+
+Required properties if child node exists:
+
+- #address-cells: Must be 1
+- #size-cells: Must be 1
+- ranges: must be present
+
+Properties for children:
+
+The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
+See Documentation/devicetree/bindings/usb/omap-ehci.txt and
+omap3-ohci.txt
+
+Example for OMAP4:
+
+usbhshost: usbhshost at 0x4a064000 {
+	compatible = "ti,usbhs-host";
+	reg = <0x4a064000 0x800>;
+	ti,hwmods = "usb_host_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	usbhsohci: ohci at 0x4a064800 {
+		compatible = "ti,omap3-ohci", "usb-ohci";
+		reg = <0x4a064800 0x400>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 76 0x4>;
+	};
+
+	usbhsehci: ehci at 0x4a064c00 {
+		compatible = "ti,omap-ehci", "usb-ehci";
+		reg = <0x4a064c00 0x400>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 77 0x4>;
+	};
+};
+
+&usbhshost {
+	port1_mode = <1>; /* OMAP_EHCI_PORT_MODE_PHY */
+	port2_mode = <2>; /* OMAP_EHCI_PORT_MODE_TLL */
+	port3_mode = <1>; /* OMAP_EHCI_PORT_MODE_PHY */
+};
+
+&usbhsehci {
+	phy = <&hsusb1_phy 0 &hsusb3_phy>;
+};
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index f8ed08e..0f67856 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -1,8 +1,9 @@
 /**
  * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
  *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com
  * Author: Keshava Munegowda <keshava_mgowda at ti.com>
+ * Author: Roger Quadros <rogerq at ti.com>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2  of
@@ -27,6 +28,8 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/usb-omap.h>
 #include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 #include "omap-usb.h"
 
@@ -464,6 +467,37 @@ static void omap_usbhs_init(struct device *dev)
 	pm_runtime_put_sync(dev);
 }
 
+static int usbhs_omap_get_dt_pdata(struct device_node *node,
+					struct usbhs_omap_platform_data *pdata)
+{
+	int ret, i;
+
+	ret = of_property_read_u32(node, "nports", &pdata->nports);
+	if (ret)
+		pdata->nports = 0;
+
+	/* get port modes */
+	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
+		char prop[11];
+
+		snprintf(prop, sizeof(prop), "port%d_mode", i + 1);
+		ret = of_property_read_u32(node, prop, &pdata->port_mode[i]);
+		if (ret)
+			pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED;
+	}
+
+	/* get flags */
+	pdata->single_ulpi_bypass = of_property_read_bool(node,
+						"single_ulpi_bypass");
+	return 0;
+}
+
+static struct of_device_id usbhs_child_match_table[] __initdata = {
+	{ .compatible = "ti,omap-ehci", },
+	{ .compatible = "ti,omap-ohci", },
+	{ }
+};
+
 /**
  * usbhs_omap_probe - initialize TI-based HCDs
  *
@@ -479,6 +513,21 @@ static int usbhs_omap_probe(struct platform_device *pdev)
 	int				i;
 	bool				need_logic_fck;
 
+	if (dev->of_node) {
+		/* For DT boot we populate platform data from OF node */
+		pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+
+		if (usbhs_omap_get_dt_pdata(dev->of_node, pdata)) {
+			dev_err(dev,
+				"Error getting platform data from DT node\n");
+			return -ENODEV;
+		}
+
+		dev->platform_data = pdata;
+	}
+
 	if (!pdata) {
 		dev_err(dev, "Missing platform data\n");
 		return -ENODEV;
@@ -490,7 +539,7 @@ static int usbhs_omap_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	omap->uhh_base = devm_request_and_ioremap(dev, res);
 	if (!omap->uhh_base) {
 		dev_err(dev, "Resource request/ioremap failed\n");
@@ -661,10 +710,23 @@ static int usbhs_omap_probe(struct platform_device *pdev)
 	}
 
 	omap_usbhs_init(dev);
-	ret = omap_usbhs_alloc_children(pdev);
-	if (ret) {
-		dev_err(dev, "omap_usbhs_alloc_children failed\n");
-		goto err_alloc;
+
+	if (dev->of_node) {
+		ret = of_platform_populate(dev->of_node,
+				usbhs_child_match_table, NULL, dev);
+
+		if (ret) {
+			dev_err(dev, "Failed to create DT children: %d\n", ret);
+			goto err_alloc;
+		}
+
+	} else {
+		ret = omap_usbhs_alloc_children(pdev);
+		if (ret) {
+			dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
+						ret);
+			goto err_alloc;
+		}
 	}
 
 	return 0;
@@ -742,11 +804,20 @@ static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
 	.runtime_resume		= usbhs_runtime_resume,
 };
 
+static const struct of_device_id usbhs_omap_dt_ids[] = {
+	{ .compatible = "ti,usbhs-host" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids);
+
+
 static struct platform_driver usbhs_omap_driver = {
 	.driver = {
 		.name		= (char *)usbhs_driver_name,
 		.owner		= THIS_MODULE,
 		.pm		= &usbhsomap_dev_pm_ops,
+		.of_match_table = of_match_ptr(usbhs_omap_dt_ids),
 	},
 	.remove		= usbhs_omap_remove,
 };
-- 
1.7.4.1



More information about the devicetree-discuss mailing list