[PATCH v4 2/4] ARM: Exynos5250: Enabling ohci-exynos driver

[Vivek Gautam]

Hi Kukjin,


On Fri, Feb 1, 2013 at 3:56 AM, Kukjin Kim <kgene.kim at samsung.com> wrote:
> Tomasz Figa wrote:
>>
>> Hi Vivek,
>
> [...]
>
>> > +   usb at 12120000 {
>> > +           compatible = "samsung,exynos4210-ohci";
>> > +           reg = <0x12120000 0x100>;
>> > +           interrupts = <0 71 0>;
>>
>> For Samsung platforms we decided per board enabling of nodes and so this
>> node should also contain:
>>
>>               status = "disabled";
>>
>> while in dts file of board using ohci there would be an overriding entry:
>>
>>       usb at 12120000 {
>>               status = "okay";
>>       };
>>
>> I know that Exynos5250 has not been yet converted into this convention,
>> but using it when adding new devices will simplify the process.
>>
> Well, I have another opinion on this...
>
> Let's see, yeah, we are using following method in EXYNOS4 DT...
> - disabling IPs in SoC DT source and enabling IPs in board DT source
>
> But as I said, in EXYNOS5440 DT, I want to use following, because most of
> them should be enabled/used.
> - enabling IPs in SoC DT source and no need enabling in board DT source.
>
> I mean, it depends on each SoC's situation.
>

So, since USB 2.0 (EHCI/OHCI) shall be always enabled on almost all the boards,
so we shall keep it enabled in SOC DT source.

In that case following patches can be picked for a merge:
[PATCH v5 1/4] ARM: Exynos5250: Enabling ehci-s5p driver
http://www.mail-archive.com/linux-usb@vger.kernel.org/msg12330.html

[PATCH v4 2/4] ARM: Exynos5250: Enabling ohci-exynos driver
http://www.mail-archive.com/linux-usb@vger.kernel.org/msg12266.html

These will enable EHCI and OHCI support on exynos5250.
Please let me know if you want me to resend them. ;-)


-- 
Thanks & Regards
Vivek