[RFC 10/11] iio: Add OF support
Jonathan Cameron
jic23 at kernel.org
Sun Feb 3 22:57:53 EST 2013
On 02/03/2013 11:52 AM, Lars-Peter Clausen wrote:
> On 02/03/2013 12:47 PM, Lars-Peter Clausen wrote:
>> On 02/03/2013 12:39 PM, Jonathan Cameron wrote:
>>> On 02/02/2013 04:10 PM, Guenter Roeck wrote:
>>>> On Sat, Feb 02, 2013 at 10:29:02AM +0000, Jonathan Cameron wrote:
>>>>> On 01/31/2013 09:43 PM, Guenter Roeck wrote:
>>>>>> Provide bindings, new API access functions, and parse OF data
>>>>>> during initialization.
>>>>>>
>>>>> Firstly thanks for working on this Guenter, it's been a big hole
>>>>> for a while largely because non of our largest developers were
>>>>> actually using development platforms with device tree support.
>>>>>
>>>>> Given my knowledge of device tree is based on the odd article
>>>>> and looking at similar sets of bindings this morning, my comments
>>>>> are likely to be somewhat superficial and uninformed ;)
>>>>>
>>>>> Mostly on this one I'll take a back seat and let those who
>>>>> know this stuff better come to a consensus.
>>>>>
>>>>> Jonathan
>>>>>
>>>>>> Signed-off-by: Guenter Roeck <linux at roeck-us.net>
>>>>>> ---
>>>>>> .../devicetree/bindings/iio/iio-bindings.txt | 97 ++++++++
>>>>>> drivers/iio/inkern.c | 241 ++++++++++++++++----
>>>>>> include/linux/iio/consumer.h | 8 +
>>>>>> 3 files changed, 299 insertions(+), 47 deletions(-)
>>>>>> create mode 100644 Documentation/devicetree/bindings/iio/iio-bindings.txt
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
>>>>>> new file mode 100644
>>>>>> index 0000000..0f51c95
>>>>>> --- /dev/null
>>>>>> +++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
>>>>>> @@ -0,0 +1,97 @@
>>>>>> +This binding is a work-in-progress, and are based on clock bindings and
>>>>>> +suggestions from Lars-Peter Clausen [1].
>>>>>> +
>>>>>> +Sources of IIO channels can be represented by any node in the device
>>>>>> +tree. Those nodes are designated as IIO providers. IIO consumer
>>>>>> +nodes use a phandle and IIO specifier pair to connect IIO provider
>>>>>> +outputs to IIO inputs. Similar to the gpio specifiers, an IIO
>>>>>> +specifier is an array of one more more cells identifying the IIO
>>>>>> +output on a device. The length of an IIO specifier is defined by the
>>>>>> +value of a #io-channel-cells property in the clock provider node.
>>>>>> +
>>>>>> +[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
>>>>>> +
>>>>>> +==IIO providers==
>>>>>> +
>>>>>> +Required properties:
>>>>>> +#io-channel-cells: Number of cells in an IIO specifier; Typically 0 for nodes
>>>>>> + with a single IIO output and 1 for nodes with multiple
>>>>>> + IIO outputs.
>>>>>> +
>>>>>> +Optional properties:
>>>>>> +io-channel-output-names:
>>>>>> + Recommended to be a list of strings of IIO output signal
>>>>>> + names indexed by the first cell in the IIO specifier.
>>>>>> + However, the meaning of io-channel-output-names is domain
>>>>>> + specific to the IIO provider, and is only provided to
>>>>>> + encourage using the same meaning for the majority of IIO
>>>>>> + providers. This format may not work for IIO providers
>>>>>> + using a complex IIO specifier format. In those cases it
>>>>>> + is recommended to omit this property and create a binding
>>>>>> + specific names property.
>>>>>> +
>>>>>> + IIO consumer nodes must never directly reference
>>>>>> + the provider's io-channel-output-names property.
>>>>>> +
>>>>>> +For example:
>>>>>> +
>>>>>> + adc: adc at 35 {
>>>>>> + compatible = "maxim,max1139";
>>>>>> + reg = <0x35>;
>>>>>> + #io-channel-cells = <1>;
>>>>>> + io-channel-output-names = "adc1", "adc2";
>>>>>> + };
>>>>>> +
>>>>>> +- this node defines a device with two named IIO outputs, the first named
>>>>>> + "adc1" and the second named "adc2". Consumer nodes always reference
>>>>>> + IIO channels by index. The names should reflect the IIO output signal
>>>>>> + names for the device.
>>>>>> +
>>>>>> +==IIO consumers==
>>>>>> +
>>>>>> +Required properties:
>>>>>> +io-channels: List of phandle and IIO specifier pairs, one pair
>>>>>> + for each IIO input to the device. Note: if the
>>>>>> + IIO provider specifies '0' for #clock-cells, then
>>>>>> + only the phandle portion of the pair will appear.
>>>>>> +
>>>>>> +Optional properties:
>>>>>> +io-channel-names:
>>>>>> + List of IIO input name strings sorted in the same
>>>>>> + order as the io-channels property. Consumers drivers
>>>>>> + will use io-channel-names to match IIO input names
>>>>>> + with IIO specifiers.
>>>>>> +io-channel-ranges:
>>>>>> + Empty property indicating that child nodes can inherit named
>>>>>> + IIO channels from this node. Useful for bus nodes to provide
>>>>>> + and IIO channel to their children.
>>>>>> +
>>>>>> +For example:
>>>>>> +
>>>>>> + device {
>>>>>> + io-channels = <&adc 1>, <&ref 0>;
>>>>>> + io-channel-names = "vcc", "vdd";
>>>>>> + };
>>>>>> +
>>>>>> +This represents a device with two IIO inputs, named "vcc" and "vdd".
>>>>>> +The vcc channel is connected to output 1 of the &adc device, and the
>>>>>> +vdd channel is connected to output 0 of the &ref device.
>>>>>> +
>>>>>> +==Example==
>>>>>> +
>>>>>> + adc: max1139 at 35 {
>>>>>> + compatible = "maxim,max1139";
>>>>>> + reg = <0x35>;
>>>>>> + #io-channel-cells = <1>;
>>>>>> + };
>>>>>> +
>>>>>> + ...
>>>>>> +
>>>>>> + iio_hwmon {
>>>>>> + compatible = "iio-hwmon";
>>>>>> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
>>>>>> + <&adc 3>, <&adc 4>, <&adc 5>,
>>>>>> + <&adc 6>, <&adc 7>, <&adc 8>,
>>>>>> + <&adc 9>, <&adc 10>, <&adc 11>;
>>>>>> + io-channel-names = "vcc", "vdd", "vref", "1.2V";
>>>>> Having different numbers of channels and channel names seems
>>>>> unusual... Deliberate or you got bored making up channel names?
>>>>>
>>>>> Why use indexed values for <&adc 0> etc rather than the output
>>>>> channel names on adc? For the iio_map stuff we initialy used
>>>>> indexes but got a lot of responses that it was a silly idea and
>>>>> naming was much more consistent and easy to follow.
>>>>>
>>>>> Is there a fundamental reason for it here?
>>>>>
>>>>> (note I don't mind either way as this seems more compact and cleaner
>>>>> in some ways)
>>>>>
>>>>
>>>> It follows the structure used by clocks, which uses the provided name(s) to
>>>> calculate an index into io-channels. This way, the provider does not have to
>>>> provide the mapping, the consumer does not have to know the io-channel index,
>>>> and the consumer code can call something like
>>>>
>>>> channel = iio_get_channel(dev, "vcc");
>>>>
>>>> In the above example, "vcc" will map to "<&adc, 0>", and "vref" to "<&adc, 2>".
>>>>
>>>> This works for both platform data and OF data (though platform data will
>>>> still need provider-based mapping, at least for now).
>>>>
>>>> This lets the code use a static name (eg "vcc"), and the mapping to the actual
>>>> provider happens through devicetree. Since the name is only used locally and
>>>> consumer driver specific, there is no need to define globally unique names.
>>>>
>>>> With this approach, the io channel map is not needed at all for the OF case.
>>>> I had used it in this version of the patch set, but got rid of it now.
>>>>
>>>> Actually, provider based mapping doesn't even work. If the consumer is
>>>> instantiated before the provider, the mapping doesn't exist yet, and the
>>>> call to iio_channel_get_all will fail. There is no way to prevent this,
>>>> as providers can come online at any time and there is no means to enforce that
>>>> all providers are already active by the time the consumers are instantiated.
>>>> Even if a mapping exists, there is no way to know if it is complete, if a
>>>> consumer is mapped to multiple providers.
>>>>
>>>> With the consumer based mapping, iio_channel_get_all 'knows' that not all
>>>> requested providers are available and can return -EPROBEDEFER in that case.
>>> Thanks. That makes sense. At the moment iio_hwmon is the only case that
>>> does a 'get all'. Clearly things are easier when the driver is requesting a
>>> specific set and we can do the back off much more easily.
>>>
>>>>
>>>> As a side effect, we can also use the names - if provided - as channel
>>>> labels in iio_hwmon.
>>>>
>>>> Note this will require the iio_get_channel API to change from taking the
>>>> consumer device name to taking the consumer device pointer as argument.
>>>> This will enable it to work for both OF and non-OF cases, should address Lars'
>>>> concerns about duplicate API functions, and synchronize the code to match how
>>>> the clock framework works.
>>>
>>> Agreed, doing this gives us a cleaner syntax as well. Note there are other
>>> users of that function in tree so be sure to get them all!
>>>
>>>>
>>>> Thanks,
>>>> Guenter
>>> Thanks for the explanation. What I was actually suggesting was something
>>> like:
>>>
>>> adc: max1139 at 35 {
>>> compatible = "maxim,max1139";
>>> reg = <0x35>;
>>> #io-channel-cells = <1>;
>>> io-channel-output-names = "adc1", "adc2", "adc3"
>>> };
>>>
>>> iio_hwmon {
>>> compatible = "iio-hwmon";
>>> io-channels = <&adc "adc1">, <&adc "adc2">, <&adc "adc3">,
>>> io-channel-names = "vcc", "vdd", "vref";
>>> }
>>>
>>> Having taken a look at the available syntax, those <> pairs have
>>> to be unsigned integers? Hence the additional level of indirection?
>>
>> Yea, I think mixing phandles and strings simply doesn't work, due how
>> devicetree stores things.
>>
>
> Another possibility would beto do things the way the regulator framework does
> an have each channel as a subnode to the converter devices eg.
>
>
> adc: max1139 at 35 {
> compatible = "maxim,max1139";
> reg = <0x35>;
> adc0: adc at 0 {
> reg = <0>;
> };
> adc1: adc at 1 {
> reg = <1>;
> };
> adc2: adc at 2 {
> reg = <2>;
> };
>
> };
>
>
> iio_hwmon {
> compatible = "iio-hwmon";
> io-channels = <&adc0>, <&adc1>, <&adc2>;
> io-channel-names = "vcc", "vdd", "vref";
> };
>
> But I'm not sure how much sense this makes for IIO.
>
The original approach is cleaner to my mind despite the indirection
(which is an indirection because often the channel indexing is non obvious
for a given device)
Lets just 'strongly' encourage the presences of io-channel-names and
io-channel-output-names even when not used by the particular drivers.
(though as Guenter said, they have uses even when not directly 'necessary')
Jonathan
> - Lars
>
>>>
>>> (sorry, I'm getting you to give me a tutorial on device tree syntax rather
>>> than the actual issue here!)
>>>
>>> I guess it was desirable to keep the syntax relatively simple but that occasionally
>>> adds the requirement for a bit of indirection.
>>>
>>>
>>>
>>> Jonathan
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the devicetree-discuss
mailing list