[PATCH v7 01/10] ARM: davinci: move private EDMA API to arm/common

[Tony Lindgren]

* Matt Porter <mporter at ti.com> [130202 11:51]:
> On Sat, Feb 02, 2013 at 10:16:43AM -0800, Tony Lindgren wrote:
> > * Matt Porter <mporter at ti.com> [130202 10:10]:
> > > If it doesn't work, work with Vinod to fix the api. It's expected,
> > > I'm working on dmaengine API changes right now to deal with a
> > > limitation of EDMA that needs to be abstracted.
> > 
> > Regarding the DMA API limitations, I'm only aware of lack of capability
> > to configure autoincrement at the device end. And that keeps us from
> > converting all GPMC related devices using omap SDMA to use the DMA API.
> > 
> > Are there other limitations currently known with the DMA API?
> 
> Yes, I called one out when this was first posted as an RFC and was
> working it in parallel with this support. This one blocks AM33XX support
> in mmc and is the reason I split all of the mmc support out of the base
> edma dmaengine for am33xx series. Independent of the blockage, whatever
> we finally settle on to address this API need will also cleanup the use
> of magic values in the davinci mmc driver (that's part of the second
> thread below).
> 
> RFC posting:
> https://patchwork.kernel.org/patch/1583531/
> Posting with initial attempt at a caps api:
> http://www.spinics.net/lists/linux-mmc/msg18351.html

OK thanks for the links, good to hear at least some work is happening
on it.

> Also, I haven't fully vetted the situation with cyclic transfers and
> EDMA, however, I'm pretty sure that we'll need some API changes there.
> The reason is that some Davinci platforms have no FIFO on their McASP
> implementation (that was a new feature added on DA8xx and also AM33xx).
> As such they have audio support implemented using ping-pong buffering
> via an SRAM buffer. There's been a number of patches ahead of all this
> that myself and others have worked upstream to get the SRAM stuff to be
> Davinci-independent (genalloc). But, at the end of all of this, there's
> no notion in a cyclic transfer of doing synchronized ping-pong buffering
> using two chain channels. This is how it is implemented (and documented
> in EDMA docs going back to the DSPs this IP first showed up on) using
> the private API. I'll be looking at this soon, but, I'm more interested
> in 1) getting the base support in 2) then the mmc stuff blocking DT
> populated platforms using omap_hsmmc (split out and posted) 3) v3 of the
> caps api w/ vinod's concerns address (working it not)
> 
> Normally, I'm not going to bring up the cyclic transfer issue until I
> have some code to show or reference for discussion...but it's worth
> being aware. But, in any case, I'm confident that will gate having the
> mcasp driver that am33xx also uses converted to dmaengine.  Except for
> the gpmc limitation you menationed, that's the last in kernel user of
> the privat edma api needed to be converted such that we can kill off
> arch/arm/common/edma.c once it's taken in.

And then there's the case of device-to-device DMA that we're not
currently doing luckily. And I don't think I've even seen that being
used so we probably don't need to worry about that one right now.

Regards,

Tony