[PATCH v4 10/10] ARM: dts: Correct camera pinctrl nodes for Exynos4x12 SoCs

Sylwester Nawrocki s.nawrocki at samsung.com
Sat Feb 2 06:09:31 EST 2013


Add separate nodes for the CAMCLK pin and turn off pull-up on camera
ports A, B. The video bus pins and the clock output (CAMCLK) pin need
separate nodes since full camera port is not used in some configurations,
e.g. for MIPI CSI-2 bus on CAMCLK is required and data/clock signal
use separate dedicated pins.

Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>

Changes since v3:
  - corrected camera port B part and removed entries for
    "inactive" state
---
 arch/arm/boot/dts/exynos4x12-pinctrl.dtsi |   26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 8e6115a..4c3a2c3 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -401,15 +401,21 @@
 			samsung,pin-drv = <0>;
 		};
 
-		cam_port_a: cam-port-a {
+		cam_port_a_io: cam-port-a-io {
 			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
-					"gpj1-4";
+					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
 			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
+			samsung,pin-pud = <0>;
 			samsung,pin-drv = <0>;
 		};
+
+		cam_port_a_clk_active: cam-port-a-clk-active {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
 	};
 
 	pinctrl at 11000000 {
@@ -834,16 +840,22 @@
 			samsung,pin-drv = <0>;
 		};
 
-		cam_port_b: cam-port-b {
+		cam_port_b_io: cam-port-b-io {
 			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
-					"gpm2-2";
+					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
 			samsung,pin-drv = <0>;
 		};
 
+		cam_port_b_clk_active: cam-port-b-clk-active {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
 		eint0: ext-int0 {
 			samsung,pins = "gpx0-0";
 			samsung,pin-function = <0xf>;
-- 
1.7.9.5



More information about the devicetree-discuss mailing list