[v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm

[Sekhar Nori]

On 4/29/2013 1:25 PM, Gupta, Pekon wrote:
> From: avinash philip <avinashphilip at ti.com>
> 
> NAND flash connected in am335x-evm on GPMC controller. This patch adds
> device tree node in am3355-evm with GPMC contoller timing for NAND flash
> interface, NAND partition table, ECC scheme, elm handle id.
> 
> Signed-off-by: Philip Avinash <avinashphilip at ti.com>
> Tested-by: Pekon Gupta <pekon at ti.com>
> 
> ---
> arch/arm/boot/dts/am335x-evm.dts |   98 +++++++++++++++++++++++++++++++++++++-
>  1 file changed, 97 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index 0423298..1c2fd89 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -26,7 +26,8 @@
>  
>  	am33xx_pinmux: pinmux at 44e10800 {
>  		pinctrl-names = "default";
> -		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
> +		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0
> +			&nandflash_pins_s0>;

Why add this to the board level fallback (called pinctrl hogs, I think)?
This can be part of nand node you added below so that the pinctrl will
take effect when nand gets probed instead of all the time.

Thanks,
Sekhar