[PATCH v5 07/10] ASoC: fsl-ssi: imx ac97 support

[Markus Pargmann]

On Thu, Apr 25, 2013 at 11:50:30AM +0800, Shawn Guo wrote:
> On Wed, Apr 24, 2013 at 04:36:36PM +0200, Markus Pargmann wrote:
> > +/*
> > + * Pointer to AC97 reset functions for specific boards
> > + */
> > +#if IS_ENABLED(CONFIG_MACH_PCA100)
> > +extern void pca100_ac97_cold_reset(struct snd_ac97 *ac97);
> > +extern void pca100_ac97_warm_reset(struct snd_ac97 *ac97);
> > +#else
> > +void pca100_ac97_cold_reset(struct snd_ac97 *ac97) { }
> > +void pca100_ac97_warm_reset(struct snd_ac97 *ac97) { }
> > +#endif
> > +
> > +#if IS_ENABLED(CONFIG_MACH_PCM043)
> > +extern void pcm043_ac97_cold_reset(struct snd_ac97 *ac97);
> > +extern void pcm043_ac97_warm_reset(struct snd_ac97 *ac97);
> > +#else
> > +void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) { }
> > +void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) { }
> > +#endif
> ...
> > @@ -717,13 +956,39 @@ static int fsl_ssi_probe(struct platform_device *pdev)
> >  
> >  	strcpy(ssi_private->name, p);
> >  
> > -	/* Initialize this copy of the CPU DAI driver structure */
> > -	memcpy(&ssi_private->cpu_dai_drv, &fsl_ssi_dai_template,
> > -	       sizeof(fsl_ssi_dai_template));
> > -	ssi_private->cpu_dai_drv.name = ssi_private->name;
> > -
> >  	ssi_private->use_dma = !of_property_read_bool(np, "fsl,imx-fiq");
> >  
> > +	if (ac97) {
> > +		sprop = of_get_property(of_find_node_by_path("/"), "compatible",
> > +				NULL);
> > +		p = strrchr(sprop, ',');
> > +		if (p)
> > +			sprop = p + 1;
> > +
> > +		if (!strcmp(sprop, "imx27-pca100")) {
> > +			ssi_private->ac97_reset = pca100_ac97_cold_reset;
> > +			ssi_private->ac97_warm_reset = pca100_ac97_warm_reset;
> > +		} else if (!strcmp(sprop, "imx27-pcm043")) {
> > +			ssi_private->ac97_reset = pcm043_ac97_cold_reset;
> > +			ssi_private->ac97_warm_reset = pcm043_ac97_warm_reset;
> > +		} else {
> > +			dev_err(&pdev->dev, "Failed to enable ssi AC97 mode, unknown board.\n");
> > +			ret = -EINVAL;
> > +			goto error_kmalloc;
> > +		}
> 
> I do not like these board specific hooks show up in an IP driver
> in such way.  Can we work it out in other ways, notification or even
> platform_data with auxdata?

soc_ac97_ops is a global symbol, so we could setup soc_ac97_ops.reset
and warm_reset in board specific ac97 drivers. For this patch I would
move the assignment of reset functions to phycore-ac97.c which already
is specifically for this codec-ssi combination on the two boards.

Regards,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |