[PATCH 0/4] ARM: davinci: fix UART clock enabling
Manjunathappa, Prakash
prakash.pm at ti.com
Wed Apr 17 16:32:46 EST 2013
Hi Sekhar,
On Tue, Apr 09, 2013 at 17:57:57, Manjunathappa, Prakash wrote:
> Patch series addresses below issues:
> 1) Do clk_get on dev_id when there is single clock for a module
> 2) Fix garbled UART log with DT kernel on da850-evm.
>
Could you please accept this series if you do not have review comments?
Thanks,
Prakash
> Applies on top of v3.9-rc9 of Linus's.
> Tested on da850-evm. Able to see proper bootup log and console on UART2.
>
> Manjunathappa, Prakash (4):
> ARM: davinci: uart: move to devid based clk_get
> ARM: davinci: da850: override device name of UART in DT kernel
> ARM: davinci: da850: do not specify clock_frequency for UART DT node
> ARM: davinci: da8xx: remove da8xx_uart_clk_enable
>
> arch/arm/boot/dts/da850.dtsi | 3 -
> arch/arm/mach-davinci/da830.c | 8 ++--
> arch/arm/mach-davinci/da850.c | 8 ++--
> arch/arm/mach-davinci/da8xx-dt.c | 11 +----
> arch/arm/mach-davinci/devices-da8xx.c | 40 ++++++++++++++++---
> arch/arm/mach-davinci/devices-tnetv107x.c | 35 ++++++++++++++---
> arch/arm/mach-davinci/dm355.c | 48 ++++++++++++++++++-----
> arch/arm/mach-davinci/dm365.c | 35 ++++++++++++----
> arch/arm/mach-davinci/dm644x.c | 48 ++++++++++++++++++-----
> arch/arm/mach-davinci/dm646x.c | 49 +++++++++++++++++++-----
> arch/arm/mach-davinci/include/mach/da8xx.h | 2 +-
> arch/arm/mach-davinci/include/mach/tnetv107x.h | 2 +-
> arch/arm/mach-davinci/serial.c | 19 ++++++---
> arch/arm/mach-davinci/tnetv107x.c | 8 ++--
> 14 files changed, 233 insertions(+), 83 deletions(-)
>
> --
> 1.7.4.1
>
>
More information about the devicetree-discuss
mailing list