[PATCH v3] clk: add PowerPC corenet clock driver support

Mike Turquette mturquette at linaro.org
Wed Apr 17 08:27:21 EST 2013


Quoting Tang Yuantian-B29983 (2013-04-15 23:59:34)
> Hi Mike,
> 
> I really appreciate if you can spend some times to review this patch.
> 

Yauntian,

Thanks for submitting this patch.  I have frozen the changes I plan to
submit for 3.10, with the exception of any last-minute fixes.  I'll take
a closer look at this after the merge window.

Regards,
Mike

> Thanks,
> Yuantian
> 
> 
> > -----Original Message-----
> > From: Tang Yuantian-B29983
> > Sent: 2013年4月9日 16:46
> > To: mturquette at linaro.org
> > Cc: linus.walleij at linaro.org; viresh.kumar at linaro.org;
> > shawn.guo at linaro.org; ulf.hansson at linaro.org; linux-
> > kernel at vger.kernel.org; devicetree-discuss at lists.ozlabs.org; linuxppc-
> > dev at lists.ozlabs.org; linux-doc at vger.kernel.org; Tang Yuantian-B29983;
> > Tang Yuantian-B29983; Li Yang-R58472
> > Subject: [PATCH v3] clk: add PowerPC corenet clock driver support
> > 
> > From: Tang Yuantian <yuantian.tang at freescale.com>
> > 
> > This adds the clock driver for Freescale PowerPC corenet series SoCs
> > using common clock infrastructure.
> > 
> > Signed-off-by: Tang Yuantian <Yuantian.Tang at freescale.com>
> > Signed-off-by: Li Yang <leoli at freescale.com>
> > ---
> > v3:
> >       - remove the module author and description
> > v2:
> >       - add the document for device tree clock bindings
> > 
> >  arch/powerpc/platforms/Kconfig.cputype |   1 +
> >  drivers/clk/Kconfig                    |   7 +
> >  drivers/clk/Makefile                   |   1 +
> >  drivers/clk/clk-ppc-corenet.c          | 280
> > +++++++++++++++++++++++++++++++++
> >  4 files changed, 289 insertions(+)
> >  create mode 100644 drivers/clk/clk-ppc-corenet.c
> > 
> > diff --git a/arch/powerpc/platforms/Kconfig.cputype
> > b/arch/powerpc/platforms/Kconfig.cputype
> > index 18e3b76..cf065b8 100644
> > --- a/arch/powerpc/platforms/Kconfig.cputype
> > +++ b/arch/powerpc/platforms/Kconfig.cputype
> > @@ -158,6 +158,7 @@ config E500
> >  config PPC_E500MC
> >       bool "e500mc Support"
> >       select PPC_FPU
> > +     select COMMON_CLK
> >       depends on E500
> >       help
> >         This must be enabled for running on e500mc (and derivatives diff
> > --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index a47e6ee..6e2fd9c
> > 100644
> > --- a/drivers/clk/Kconfig
> > +++ b/drivers/clk/Kconfig
> > @@ -63,6 +63,13 @@ config CLK_TWL6040
> >         McPDM. McPDM module is using the external bit clock on the McPDM
> > bus
> >         as functional clock.
> > 
> > +config CLK_PPC_CORENET
> > +     bool "Clock driver for PowerPC corenet platforms"
> > +     depends on PPC_E500MC && OF
> > +     ---help---
> > +       This adds the clock driver support for Freescale PowerPC corenet
> > +       platforms using common clock framework.
> > +
> >  endmenu
> > 
> >  source "drivers/clk/mvebu/Kconfig"
> > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index
> > 300d477..6720319 100644
> > --- a/drivers/clk/Makefile
> > +++ b/drivers/clk/Makefile
> > @@ -34,3 +34,4 @@ obj-$(CONFIG_X86)           += x86/
> >  obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
> >  obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
> >  obj-$(CONFIG_CLK_TWL6040)    += clk-twl6040.o
> > +obj-$(CONFIG_CLK_PPC_CORENET)        += clk-ppc-corenet.o
> > diff --git a/drivers/clk/clk-ppc-corenet.c b/drivers/clk/clk-ppc-
> > corenet.c new file mode 100644 index 0000000..a2d483f
> > --- /dev/null
> > +++ b/drivers/clk/clk-ppc-corenet.c
> > @@ -0,0 +1,280 @@
> > +/*
> > + * Copyright 2013 Freescale Semiconductor, Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * clock driver for Freescale PowerPC corenet SoCs.
> > + */
> > +#include <linux/clk-provider.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/of.h>
> > +#include <linux/slab.h>
> > +
> > +struct cmux_clk {
> > +     struct clk_hw hw;
> > +     void __iomem *reg;
> > +     u32 flags;
> > +};
> > +
> > +#define PLL_KILL                     BIT(31)
> > +#define      CLKSEL_SHIFT            27
> > +#define CLKSEL_ADJUST                BIT(0)
> > +#define to_cmux_clk(p)               container_of(p, struct cmux_clk, hw)
> > +
> > +static void __iomem *base;
> > +static unsigned int clocks_per_pll;
> > +
> > +static int cmux_set_parent(struct clk_hw *hw, u8 idx) {
> > +     struct cmux_clk *clk = to_cmux_clk(hw);
> > +     u32 clksel;
> > +
> > +     clksel = ((idx / clocks_per_pll) << 2) + idx % clocks_per_pll;
> > +     if (clk->flags & CLKSEL_ADJUST)
> > +             clksel += 8;
> > +     clksel = (clksel & 0xf) << CLKSEL_SHIFT;
> > +     iowrite32be(clksel, clk->reg);
> > +
> > +     return 0;
> > +}
> > +
> > +static u8 cmux_get_parent(struct clk_hw *hw) {
> > +     struct cmux_clk *clk = to_cmux_clk(hw);
> > +     u32 clksel;
> > +
> > +     clksel = ioread32be(clk->reg);
> > +     clksel = (clksel >> CLKSEL_SHIFT) & 0xf;
> > +     if (clk->flags & CLKSEL_ADJUST)
> > +             clksel -= 8;
> > +     clksel = (clksel >> 2) * clocks_per_pll + clksel % 4;
> > +
> > +     return clksel;
> > +}
> > +
> > +const struct clk_ops cmux_ops = {
> > +     .get_parent = cmux_get_parent,
> > +     .set_parent = cmux_set_parent,
> > +};
> > +
> > +static void __init core_mux_init(struct device_node *np) {
> > +     struct clk *clk;
> > +     struct clk_init_data init;
> > +     struct cmux_clk *cmux_clk;
> > +     struct device_node *node;
> > +     int rc, count, i;
> > +     u32     offset;
> > +     const char *clk_name;
> > +     const char **parent_names;
> > +
> > +     rc = of_property_read_u32(np, "reg", &offset);
> > +     if (rc) {
> > +             pr_err("%s: could not get reg property\n", np->name);
> > +             return;
> > +     }
> > +
> > +     /* get the input clock source count */
> > +     count = of_property_count_strings(np, "clock-names");
> > +     if (count < 0) {
> > +             pr_err("%s: get clock count error\n", np->name);
> > +             return;
> > +     }
> > +     parent_names = kzalloc((sizeof(char *) * count), GFP_KERNEL);
> > +     if (!parent_names) {
> > +             pr_err("%s: could not allocate parent_names\n", __func__);
> > +             return;
> > +     }
> > +
> > +     for (i = 0; i < count; i++)
> > +             parent_names[i] = of_clk_get_parent_name(np, i);
> > +
> > +     cmux_clk = kzalloc(sizeof(struct cmux_clk), GFP_KERNEL);
> > +     if (!cmux_clk) {
> > +             pr_err("%s: could not allocate cmux_clk\n", __func__);
> > +             goto err_name;
> > +     }
> > +     cmux_clk->reg = base + offset;
> > +
> > +     node = of_find_compatible_node(NULL, NULL, "fsl,p4080-clockgen");
> > +     if (node && (offset >= 0x80))
> > +             cmux_clk->flags = CLKSEL_ADJUST;
> > +
> > +     rc = of_property_read_string_index(np, "clock-output-names",
> > +                     0, &clk_name);
> > +     if (rc) {
> > +             pr_err("%s: read clock names error\n", np->name);
> > +             goto err_clk;
> > +     }
> > +
> > +     init.name = clk_name;
> > +     init.ops = &cmux_ops;
> > +     init.parent_names = parent_names;
> > +     init.num_parents = count;
> > +     init.flags = 0;
> > +     cmux_clk->hw.init = &init;
> > +
> > +     clk = clk_register(NULL, &cmux_clk->hw);
> > +     if (IS_ERR(clk)) {
> > +             pr_err("%s: could not register clock\n", clk_name);
> > +             goto err_clk;
> > +     }
> > +
> > +     rc = of_clk_add_provider(np, of_clk_src_simple_get, clk);
> > +     if (rc) {
> > +             pr_err("Could not register clock provider for node:%s\n",
> > +                      np->name);
> > +             goto err_clk;
> > +     }
> > +     goto err_name;
> > +
> > +err_clk:
> > +     kfree(cmux_clk);
> > +err_name:
> > +     /* free *_names because they are reallocated when registered */
> > +     kfree(parent_names);
> > +}
> > +
> > +static void __init core_pll_init(struct device_node *np) {
> > +     u32 offset, mult;
> > +     int i, rc, count;
> > +     const char *clk_name, *parent_name;
> > +     struct clk_onecell_data *onecell_data;
> > +     struct clk      **subclks;
> > +
> > +     rc = of_property_read_u32(np, "reg", &offset);
> > +     if (rc) {
> > +             pr_err("%s: could not get reg property\n", np->name);
> > +             return;
> > +     }
> > +
> > +     /* get the multiple of PLL */
> > +     mult = ioread32be(base + offset);
> > +
> > +     /* check if this PLL is disabled */
> > +     if (mult & PLL_KILL) {
> > +             pr_debug("PLL:%s is disabled\n", np->name);
> > +             return;
> > +     }
> > +     mult = (mult >> 1) & 0x3f;
> > +
> > +     parent_name = of_clk_get_parent_name(np, 0);
> > +     if (!parent_name) {
> > +             pr_err("PLL: %s must have a parent\n", np->name);
> > +             return;
> > +     }
> > +
> > +     count = of_property_count_strings(np, "clock-output-names");
> > +     if (count < 0 || count > 4) {
> > +             pr_err("%s: clock is not supported\n", np->name);
> > +             return;
> > +     }
> > +
> > +     /* output clock number per PLL */
> > +     clocks_per_pll = count;
> > +
> > +     subclks = kzalloc(sizeof(struct clk *) * count, GFP_KERNEL);
> > +     if (!subclks) {
> > +             pr_err("%s: could not allocate subclks\n", __func__);
> > +             return;
> > +     }
> > +
> > +     onecell_data = kzalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
> > +     if (!onecell_data) {
> > +             pr_err("%s: could not allocate onecell_data\n", __func__);
> > +             goto err_clks;
> > +     }
> > +
> > +     for (i = 0; i < count; i++) {
> > +             rc = of_property_read_string_index(np, "clock-output-names",
> > +                             i, &clk_name);
> > +             if (rc) {
> > +                     pr_err("%s: could not get clock names\n", np->name);
> > +                     goto err_cell;
> > +             }
> > +
> > +             /*
> > +              * when count == 4, there are 4 output clocks:
> > +              * /1, /2, /3, /4 respectively
> > +              * when count < 4, there are at least 2 output clocks:
> > +              * /1, /2, (/4, if count == 3) respectively.
> > +              */
> > +             if (count == 4)
> > +                     subclks[i] = clk_register_fixed_factor(NULL, clk_name,
> > +                                     parent_name, 0, mult, 1 + i);
> > +             else
> > +
> > +                     subclks[i] = clk_register_fixed_factor(NULL, clk_name,
> > +                                     parent_name, 0, mult, 1 << i);
> > +
> > +             if (IS_ERR(subclks[i])) {
> > +                     pr_err("%s: could not register clock\n", clk_name);
> > +                     goto err_cell;
> > +             }
> > +     }
> > +
> > +     onecell_data->clks = subclks;
> > +     onecell_data->clk_num = count;
> > +
> > +     rc = of_clk_add_provider(np, of_clk_src_onecell_get, onecell_data);
> > +     if (rc) {
> > +             pr_err("Could not register clk provider for node:%s\n",
> > +                      np->name);
> > +             goto err_cell;
> > +     }
> > +
> > +     return;
> > +err_cell:
> > +     kfree(onecell_data);
> > +err_clks:
> > +     kfree(subclks);
> > +}
> > +
> > +static const struct of_device_id clk_match[] __initconst = {
> > +     { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
> > +     { .compatible = "fsl,core-pll-clock", .data = core_pll_init, },
> > +     { .compatible = "fsl,core-mux-clock", .data = core_mux_init, },
> > +     {}
> > +};
> > +
> > +static int __init ppc_corenet_clk_probe(struct platform_device *pdev) {
> > +     struct device_node *np;
> > +
> > +     np = pdev->dev.of_node;
> > +     base = of_iomap(np, 0);
> > +     if (!base) {
> > +             dev_err(&pdev->dev, "iomap error\n");
> > +             return -ENOMEM;
> > +     }
> > +     of_clk_init(clk_match);
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct of_device_id ppc_clk_ids[] __initconst = {
> > +     { .compatible = "fsl,qoriq-clockgen-1.0", },
> > +     { .compatible = "fsl,qoriq-clockgen-2", },
> > +     {}
> > +};
> > +
> > +static struct platform_driver ppc_corenet_clk_driver = {
> > +     .driver = {
> > +             .name = "ppc_corenet_clock",
> > +             .owner = THIS_MODULE,
> > +             .of_match_table = ppc_clk_ids,
> > +     },
> > +     .probe = ppc_corenet_clk_probe,
> > +};
> > +
> > +static int __init ppc_corenet_clk_init(void) {
> > +     return platform_driver_register(&ppc_corenet_clk_driver);
> > +}
> > +subsys_initcall(ppc_corenet_clk_init);
> > --
> > 1.8.0


More information about the devicetree-discuss mailing list