[PATCH 6/8] ARM: at91: sam9263: add fb dt support

[Jean-Christophe PLAGNIOL-VILLARD]

On 16:11 Tue 16 Apr     , Nicolas Ferre wrote:
> On 04/11/2013 05:00 PM, Jean-Christophe PLAGNIOL-VILLARD :
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> > Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
> > ---
> >  arch/arm/boot/dts/at91sam9263.dtsi |   39 ++++++++++++++++++++++++++++++++++++
> >  1 file changed, 39 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
> > index 271d4de..3d0effa 100644
> > --- a/arch/arm/boot/dts/at91sam9263.dtsi
> > +++ b/arch/arm/boot/dts/at91sam9263.dtsi
> > @@ -303,6 +303,34 @@
> >  					};
> >  				};
> >  
> > +				fb {
> > +					pinctrl_fb: fb-0 {
> > +						atmel,pins =
> > +							<2 1 0x1 0x0	/* PC1 periph A */
> > +							 2 2 0x1 0x0	/* PC2 periph A */
> > +							 2 3 0x1 0x0	/* PC3 periph A */
> > +							 1 9 0x2 0x0	/* PB9 periph B */
> > +							 2 6 0x1 0x0	/* PC6 periph A */
> > +							 2 7 0x1 0x0	/* PC7 periph A */
> > +							 2 8 0x1 0x0	/* PC8 periph A */
> > +							 2 9 0x1 0x0	/* PC9 periph A */
> > +							 2 10 0x1 0x0	/* PC10 periph A */
> > +							 2 11 0x1 0x0	/* PC11 periph A */
> > +							 2 14 0x1 0x0	/* PC14 periph A */
> > +							 2 15 0x1 0x0	/* PC15 periph A */
> > +							 2 16 0x1 0x0	/* PC16 periph A */
> > +							 2 12 0x2 0x0	/* PC12 periph B */
> > +							 2 18 0x1 0x0	/* PC18 periph A */
> > +							 2 19 0x1 0x0	/* PC19 periph A */
> > +							 2 22 0x1 0x0	/* PC22 periph A */
> > +							 2 23 0x1 0x0	/* PC23 periph A */
> > +							 2 24 0x1 0x0	/* PC24 periph A */
> > +							 2 17 0x2 0x0	/* PC17 periph B */
> > +							 2 26 0x1 0x0	/* PC26 periph A */
> > +							 2 27 0x1 0x0>;	/* PC27 periph A */
> 
> Verified, okay.
> 
> > +					};
> > +				};
> > +
> >  				pioA: gpio at fffff200 {
> >  					compatible = "atmel,at91rm9200-gpio";
> >  					reg = <0xfffff200 0x200>;
> > @@ -464,6 +492,17 @@
> >  			};
> >  		};
> >  
> > +		fb0: fb at 0x00500000 {
> 
> No, it is 0x700000
> 
> > +			compatible = "atmel,at91sam9263-lcdc";
> > +			reg = <0x00700000 0x1000>;
> 
> Ditto.
> 
> > +			interrupts = <26 3 0>;
> 
> <26 4 0> here.
no lcd is 3 even in c

and even 3 could be slow in some big lcd case
> 
> 
> > +			pinctrl-names = "default";
> > +			pinctrl-0 = <&pinctrl_fb>;
> > +			status = "disabled";
> > +			#address-cells = <1>;
> > +			#size-cells = <1>;
> 
> Ditto in 9g45 case.
> 
> > +		};
> > +
> >  		nand0: nand at 40000000 {
> >  			compatible = "atmel,at91rm9200-nand";
> >  			#address-cells = <1>;
> > 
> 
> 
> -- 
> Nicolas Ferre