[PATCH v3 2/2] video: imxfb: Add DT support

[Markus Pargmann]

On Mon, Apr 15, 2013 at 03:23:22PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 15:13 Mon 15 Apr     , Eric Bénard wrote:
> > Hi,
> > 
> > Le Mon, 15 Apr 2013 14:43:21 +0200,
> > Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com> a écrit :
> > 
> > > On 16:31 Sun 14 Apr     , Markus Pargmann wrote:
> > > > On Mon, Apr 08, 2013 at 09:57:42AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > > > On 12:31 Fri 05 Apr     , Markus Pargmann wrote:
> > > > > > Add devicetree support for imx framebuffer driver. It uses the generic
> > > > > > display bindings and helper functions.
> > > > > > 
> > > > > > Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
> > > > > > Cc: Fabio Estevam <festevam at gmail.com>
> > > > > > Cc: Mark Rutland <mark.rutland at arm.com>
> > > > > > ---
> > > > > >  .../devicetree/bindings/video/fsl,imx-fb.txt       |  49 ++++++
> > > > > >  drivers/video/imxfb.c                              | 192 +++++++++++++++++----
> > > > > >  2 files changed, 207 insertions(+), 34 deletions(-)
> > > > > >  create mode 100644 Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > > > > > 
> > > > > > diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > > > > > new file mode 100644
> > > > > > index 0000000..bde9c77
> > > > > > --- /dev/null
> > > > > > +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > > > > > @@ -0,0 +1,49 @@
> > > > > > +Freescale imx21 Framebuffer
> > > > > > +
> > > > > > +This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
> > > > > > +
> > > > > > +Required properties:
> > > > > > +- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
> > > > > > +- reg : Should contain 1 register ranges(address and length)
> > > > > > +- interrupts : One interrupt of the fb dev
> > > > > > +
> > > > > > +Required nodes:
> > > > > > +- display: Phandle to a display node as described in
> > > > > > +	Documentation/devicetree/bindings/video/display-timing.txt
> > > > > > +	Additional, the display node has to define properties:
> > > > > > +	- fsl,bpp: Bits per pixel
> > > > > > +	- fsl,pcr: LCDC PCR value
> > > > > > +
> > > > > > +Optional properties:
> > > > > > +- dmacr-eukrea: Should be set for eukrea boards.
> > > > > why ?
> > > > 
> > > > Because eukrea boards have a different dmacr then all other boards using
> > > > imxfb. The dmacr address is hardcoded as defaults in the code. I could
> > > > also search for the board name in the DT, but there are no eukrea boards
> > > > with DT at the moment, so I thought a bool property may be better for
> > > > the moment.
> > > so no if an other board come will have an other property no
> > > 
> > > add an optionnal option to pass the dmacr
> > 
> > I didn't follow the thread but dmacr is not specific to our boards :
> > $ grep -rn dmacr arch/arm/mach-imx/
> > arch/arm/mach-imx/mach-mx27_3ds.c:446:	.dmacr		= 0x00020010,
> > arch/arm/mach-imx/mach-mx21ads.c:231:	.dmacr		= 0x00020008,
> > arch/arm/mach-imx/mach-mxt_td60.c:210:	.dmacr		= 0x00020010,
> > arch/arm/mach-imx/eukrea_mbimx27-baseboard.c:192:	.dmacr		= 0x00040060,
> > arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c:165:	.dmacr		= 0x00040060,
> > arch/arm/mach-imx/mach-mx27ads.c:241:	.dmacr		= 0x00020010,
> > arch/arm/mach-imx/mach-pca100.c:351:	.dmacr		= 0x00020010,
> > arch/arm/mach-imx/pcm970-baseboard.c:185:	.dmacr		= 0x00020010,
> > arch/arm/mach-imx/mach-mx25_3ds.c:173:	.dmacr		= 0x00020010,
> 
> with this it even more clear nack on the dmacr-eukrea property
> 
> use an optional property where we can specify the value to use
> 
> Best Regsrds,
> J.
> 

v4 will contain a optional fsl,dmacr property now. By default the reset
value of dmacr register is not changed.

Regards,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |