[RFC PATCH 2/2] ARM: DT: kernel: DT cpu node bindings update
Simon Horman
horms at verge.net.au
Tue Apr 16 12:41:46 EST 2013
On Mon, Apr 15, 2013 at 05:13:22PM +0100, Lorenzo Pieralisi wrote:
> In order to extend the current cpu nodes bindings to newer CPUs
> inclusive of AArch64 and to update support for older ARM CPUs this
> patch updates device tree documentation for the cpu nodes bindings.
>
> Main changes:
>
> - adds 64-bit bindings (inclusive of cpus node #address-cells updates)
> - defines behaviour on pre and post v7 uniprocessor systems
> - adds ARM 11MPcore specific reg property definition
>
> DT cpu map parsing code must be made compliant with the latest bindings
> updates, hence this patch also updates the arm_dt_init_cpu_maps() function
> with checks and additional parsing rules.
>
> Uniprocessor systems predating v7 do not parse the cpus node at all
> since the reg property is meaningless on those systems.
>
> Device trees for 64-bit systems can be taken as device tree input also
> for 64-bit CPUs running in 32-bit mode. The code checks that the reg entries
> are zeroed as required in the respective fields and detects automatically
> the cpus node #address-cells value so that device tree written for
> 64-bit ARM platforms (cpus #address-cells == 2) can still be taken as
> input. The correct device tree entries are to be set up by the boot
> loader, kernel code just checks that device tree entries in the cpus
> node are as expected for a 32-bit CPU (reg[63:24] == 0).
>
> cpu node entries with invalid reg property or containing duplicates are
> ignored and the device tree parsing is not stopped anymore when such
> entries are encountered, the device tree cpu entry is just skipped.
>
> A device tree with cpu nodes missing the boot CPU MPIDR is considered a
> hard error and the kernel flags this up as a bug to force firmware updates.
>
> The updates to cpus/cpu node bindings for ARM require all in-kernel dts files
> present in the mainline to be made compliant to the latest specification.
>
> This patch also updates ARM in-kernel non-compliant dts files to the latest
> cpus/cpu nodes bindings specification.
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
> ---
> Documentation/devicetree/bindings/arm/cpus.txt | 335 +++++++++++++++++++++----
> arch/arm/boot/dts/exynos5440.dtsi | 7 +
> arch/arm/boot/dts/omap3.dtsi | 4 +
> arch/arm/boot/dts/omap4.dtsi | 5 +
> arch/arm/boot/dts/omap5.dtsi | 5 +
> arch/arm/boot/dts/r8a7740.dtsi | 3 +
> arch/arm/boot/dts/sh7372.dtsi | 4 +
I would prefer if the SoC updates, in particular the sh7372 portion,
was a separate patch.
> arch/arm/boot/dts/sunxi.dtsi | 4 +
> arch/arm/kernel/devtree.c | 82 +++---
> 9 files changed, 377 insertions(+), 72 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
> index f32494d..b1ef3d8 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.txt
> +++ b/Documentation/devicetree/bindings/arm/cpus.txt
> @@ -1,4 +1,6 @@
> -* ARM CPUs binding description
> +=============================
> +ARM CPUs bindings description
> +=============================
>
> The device tree allows to describe the layout of CPUs in a system through
> the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
> @@ -8,70 +10,317 @@ Bindings for CPU nodes follow the ePAPR standard, available from:
>
> http://devicetree.org
>
> -For the ARM architecture every CPU node must contain the following properties:
> -
> -- device_type: must be "cpu"
> -- reg: property matching the CPU MPIDR[23:0] register bits
> - reg[31:24] bits must be set to 0
> -- compatible: should be one of:
> - "arm,arm1020"
> - "arm,arm1020e"
> - "arm,arm1022"
> - "arm,arm1026"
> - "arm,arm720"
> - "arm,arm740"
> - "arm,arm7tdmi"
> - "arm,arm920"
> - "arm,arm922"
> - "arm,arm925"
> - "arm,arm926"
> - "arm,arm940"
> - "arm,arm946"
> - "arm,arm9tdmi"
> - "arm,cortex-a5"
> - "arm,cortex-a7"
> - "arm,cortex-a8"
> - "arm,cortex-a9"
> - "arm,cortex-a15"
> - "arm,arm1136"
> - "arm,arm1156"
> - "arm,arm1176"
> - "arm,arm11mpcore"
> - "faraday,fa526"
> - "intel,sa110"
> - "intel,sa1100"
> - "marvell,feroceon"
> - "marvell,mohawk"
> - "marvell,xsc3"
> - "marvell,xscale"
> -
> -Example:
> +with updates for 32-bit and 64-bit ARM systems provided in this document.
> +
> +In the bindings below:
> +
> +- square brackets define bitfields, eg reg[7:0] value of the bitfield in
> + the reg property contained in bits 7 down to 0
> +
> +- cpus node
> +
> + Description: Container of cpu nodes
> +
> + The node name must be "cpus".
> +
> + A cpus node must define the following properties:
> +
> + - #address-cells
> + Usage: required
> + Value type: <u32>
> + Definition: must be set to 1 for 32-bit systems and 2 for
> + 64-bit systems
> + - #size-cells
> + Usage: required
> + Value type: <u32>
> + Definition: must be set to 0
> +
> +- cpu node
> +
> + Description: Describes a CPU in an ARM based system
> +
> + PROPERTIES
> +
> + - device_type
> + Usage: required
> + Value type: <string>
> + Definition: must be "cpu"
> + - reg
> + Usage and definition depend on ARM architecture version and
> + configuration:
> +
> + # On uniprocessor ARM architectures previous to v7
> + this property is optional since they do not define
> + any register that provides a CPU identifier.
> + Any value set in the reg property for these CPUs
> + should be ignored.
> +
> + # On ARM 11 MPcore based systems this property is
> + required and matches the CPUID[11:0] register bits.
> +
> + Bits [11:0] in the reg cell must be set to
> + bits [11:0] in CPU ID register.
> +
> + All other bits in the reg cell must be set to 0.
> +
> + # On ARM architecture versions >= 7 based 32-bit
> + systems this property is required and matches the
> + CPU MPIDR[23:0] register bits.
> +
> + Bits [23:0] in the reg cell must be set to
> + bits [23:0] in MPIDR.
> +
> + All other bits in the reg cell must be set to 0.
> +
> + # On ARM v8 64-bit systems, where the reg property
> + is made up of two cells to accomodate the 64-bit
> + MPDIR_EL1 register this property is required and
> + matches:
> +
> + The first reg cell bits [7:0] must be set to
> + bits [39:32] of MPIDR_EL1.
> +
> + The second reg cell bits [23:0] must be set to
> + bits [23:0] of MPIDR_EL1.
> +
> + All other bits in the reg cells must be set to 0.
> + - compatible:
> + Usage: required
> + Value type: <string>
> + Definition: should be one of:
> + "arm,arm1020"
> + "arm,arm1020e"
> + "arm,arm1022"
> + "arm,arm1026"
> + "arm,arm720"
> + "arm,arm740"
> + "arm,arm7tdmi"
> + "arm,arm920"
> + "arm,arm922"
> + "arm,arm925"
> + "arm,arm926"
> + "arm,arm940"
> + "arm,arm946"
> + "arm,arm9tdmi"
> + "arm,cortex-a5"
> + "arm,cortex-a7"
> + "arm,cortex-a8"
> + "arm,cortex-a9"
> + "arm,cortex-a15"
> + "arm,cortex-a57"
> + "arm,arm1136"
> + "arm,arm1156"
> + "arm,arm1176"
> + "arm,arm11mpcore"
> + "faraday,fa526"
> + "intel,sa110"
> + "intel,sa1100"
> + "marvell,feroceon"
> + "marvell,mohawk"
> + "marvell,xsc3"
> + "marvell,xscale"
> + - enable-method
> + Usage: required on ARM 64-bit systems, optional on ARM 32-bit
> + systems
> + Value type: <string>
> + Definition: On ARM 64-bit systems must be "spin-table" [1].
> +
> + - cpu-release-addr
> + Usage: required on ARM 64-bit systems, optional on ARM 32-bit
> + systems
> + Value type: <prop-encoded-array>
> + Definition: On ARM 64-bit systems must be a two cell
> + property identifying a 64-bit zero-initialised
> + memory location [1].
> +
> +Example 1 (dual-cluster big.LITTLE system 32-bit):
>
> cpus {
> #size-cells = <0>;
> #address-cells = <1>;
>
> - CPU0: cpu at 0 {
> + cpu at 0 {
> device_type = "cpu";
> compatible = "arm,cortex-a15";
> reg = <0x0>;
> };
>
> - CPU1: cpu at 1 {
> + cpu at 1 {
> device_type = "cpu";
> compatible = "arm,cortex-a15";
> reg = <0x1>;
> };
>
> - CPU2: cpu at 100 {
> + cpu at 100 {
> device_type = "cpu";
> compatible = "arm,cortex-a7";
> reg = <0x100>;
> };
>
> - CPU3: cpu at 101 {
> + cpu at 101 {
> device_type = "cpu";
> compatible = "arm,cortex-a7";
> reg = <0x101>;
> };
> };
> +
> +Example 2 (Cortex-A8 uniprocessor 32-bit system):
> +
> + cpus {
> + #size-cells = <0>;
> + #address-cells = <1>;
> +
> + cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a8";
> + reg = <0x0>;
> + };
> +
> + };
> +
> +Example 3 (ARM 1176 uniprocessor 32-bit system):
> +
> + cpus {
> + cpu {
> + device_type = "cpu";
> + compatible = "arm,arm1176";
> + };
> + };
> +
> +Example 4 (ARM Cortex-A57 64-bit system):
> +
> +cpus {
> + #size-cells = <0>;
> + #address-cells = <2>;
> +
> + cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x0 0x0>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x0 0x1>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x0 0x100>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x0 0x101>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 10000 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x0 0x10000>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 10001 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x0 0x10001>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 10100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x0 0x10100>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 10101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x0 0x10101>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 100000000 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x1 0x0>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 100000001 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x1 0x1>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 100000100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x1 0x100>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 100000101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x1 0x101>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 100010000 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x1 0x10000>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 100010001 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x1 0x10001>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 100010100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x1 0x10100>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +
> + cpu at 100010101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x1 0x10101>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0 0x20000000>;
> + };
> +};
> +===============================================================================
> +[1] ARM Linux kernel documentation
> + Documentation/devicetree/bindings/arm64/booting.txt
> diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
> index 5f3562a..eda21d5 100644
> --- a/arch/arm/boot/dts/exynos5440.dtsi
> +++ b/arch/arm/boot/dts/exynos5440.dtsi
> @@ -24,8 +24,12 @@
> };
>
> cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> cpu at 0 {
> compatible = "arm,cortex-a15";
> + reg = <0x0>;
> timer {
> compatible = "arm,armv7-timer";
> interrupts = <1 13 0xf08>;
> @@ -34,6 +38,7 @@
> };
> cpu at 1 {
> compatible = "arm,cortex-a15";
> + reg = <0x1>;
> timer {
> compatible = "arm,armv7-timer";
> interrupts = <1 14 0xf08>;
> @@ -42,6 +47,7 @@
> };
> cpu at 2 {
> compatible = "arm,cortex-a15";
> + reg = <0x2>;
> timer {
> compatible = "arm,armv7-timer";
> interrupts = <1 14 0xf08>;
> @@ -50,6 +56,7 @@
> };
> cpu at 3 {
> compatible = "arm,cortex-a15";
> + reg = <0x3>;
> timer {
> compatible = "arm,armv7-timer";
> interrupts = <1 14 0xf08>;
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 1acc261..b4e2b8d 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -21,8 +21,12 @@
> };
>
> cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> cpu at 0 {
> compatible = "arm,cortex-a8";
> + reg = <0x0>;
> };
> };
>
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 739bb79..9c5f7c2 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -28,13 +28,18 @@
> };
>
> cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> cpu at 0 {
> compatible = "arm,cortex-a9";
> next-level-cache = <&L2>;
> + reg = <0x0>;
> };
> cpu at 1 {
> compatible = "arm,cortex-a9";
> next-level-cache = <&L2>;
> + reg = <0x1>;
> };
> };
>
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index 790bb2a..d2106b6 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -31,8 +31,12 @@
> };
>
> cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> cpu at 0 {
> compatible = "arm,cortex-a15";
> + reg = <0x0>;
> timer {
> compatible = "arm,armv7-timer";
> /* 14th PPI IRQ, active low level-sensitive */
> @@ -42,6 +46,7 @@
> };
> cpu at 1 {
> compatible = "arm,cortex-a15";
> + reg = <0x1>;
> timer {
> compatible = "arm,armv7-timer";
> /* 14th PPI IRQ, active low level-sensitive */
> diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
> index 798fa35..b47bb36 100644
> --- a/arch/arm/boot/dts/r8a7740.dtsi
> +++ b/arch/arm/boot/dts/r8a7740.dtsi
> @@ -14,8 +14,11 @@
> compatible = "renesas,r8a7740";
>
> cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> cpu at 0 {
> compatible = "arm,cortex-a9";
> + reg = <0x0>;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi
> index 677fc60..78478af 100644
> --- a/arch/arm/boot/dts/sh7372.dtsi
> +++ b/arch/arm/boot/dts/sh7372.dtsi
> @@ -14,8 +14,12 @@
> compatible = "renesas,sh7372";
>
> cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> cpu at 0 {
> compatible = "arm,cortex-a8";
> + reg = <0x0>;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi
> index 8b36abe..447a0f0 100644
> --- a/arch/arm/boot/dts/sunxi.dtsi
> +++ b/arch/arm/boot/dts/sunxi.dtsi
> @@ -17,8 +17,12 @@
> interrupt-parent = <&intc>;
>
> cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> cpu at 0 {
> compatible = "arm,cortex-a8";
> + reg = <0x0>;
> };
> };
>
> diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
> index f149217..4eda2dc 100644
> --- a/arch/arm/kernel/devtree.c
> +++ b/arch/arm/kernel/devtree.c
> @@ -23,6 +23,7 @@
> #include <asm/setup.h>
> #include <asm/page.h>
> #include <asm/smp_plat.h>
> +#include <asm/system_info.h>
> #include <asm/mach/arch.h>
> #include <asm/mach-types.h>
>
> @@ -81,48 +82,68 @@ void __init arm_dt_init_cpu_maps(void)
> static u32 tmp_map[NR_CPUS] __initdata = {
> [0 ... NR_CPUS-1] = UINT_MAX };
> struct device_node *cpu, *cpus;
> - u32 i, j, cpuidx = 1;
> + u32 i, j, ac, cpuidx = 1;
> u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0;
> -
> + int len;
> bool bootcpu_valid = false;
> +
> cpus = of_find_node_by_path("/cpus");
>
> - if (!cpus)
> + if (!cpus || ((cpu_architecture() < CPU_ARCH_ARMv7) && !is_smp()))
> return;
>
> + if (WARN_ON(of_property_read_u32(cpus, "#address-cells", &ac)))
> + ac = of_n_addr_cells(cpus);
> +
> for_each_child_of_node(cpus, cpu) {
> - u32 hwid;
> + u64 hwid64;
> + u32 hwid32;
> + const __be32 *prop;
>
> pr_debug(" * %s...\n", cpu->full_name);
> /*
> - * A device tree containing CPU nodes with missing "reg"
> - * properties is considered invalid to build the
> - * cpu_logical_map.
> + * A CPU node with missing or wrong "reg" property is
> + * considered invalid to build a cpu_logical_map entry.
> */
> - if (of_property_read_u32(cpu, "reg", &hwid)) {
> - pr_debug(" * %s missing reg property\n",
> - cpu->full_name);
> - return;
> + prop = of_get_property(cpu, "reg", &len);
> + if (!prop || len < (ac * sizeof(*prop))) {
> + WARN(1, " * %s node missing/wrong reg"
> + " property, skipped\n",
> + cpu->full_name);
> + goto next;
> }
> -
> /*
> - * 8 MSBs must be set to 0 in the DT since the reg property
> - * defines the MPIDR[23:0].
> + * Always read reg as u64 value.
> + * For dts with #address-cells == 1 hwid64[63:32]
> + * will be set to 0 by of_read_number.
> + * Toss away the top 32 bits and store value in hwid32.
> + */
> + hwid32 = hwid64 = of_read_number(prop, ac);
> + /*
> + * hwid64[63:24] must be always be 0 since the reg
> + * property defines the MPIDR[23:0] bits regardless
> + * of the cpus node #address-cells value.
> */
> - if (hwid & ~MPIDR_HWID_BITMASK)
> - return;
> + if (hwid64 & ~MPIDR_HWID_BITMASK) {
> + WARN(1, " * %s node reg[63:24] must be 0 on"
> + " 32-bit dts, got %#016llx, skipped\n",
> + cpu->full_name, hwid64);
> + goto next;
> + }
>
> /*
> * Duplicate MPIDRs are a recipe for disaster.
> * Scan all initialized entries and check for
> - * duplicates. If any is found just bail out.
> + * duplicates. If any is found just ignore the CPU.
> * temp values were initialized to UINT_MAX
> * to avoid matching valid MPIDR[23:0] values.
> */
> for (j = 0; j < cpuidx; j++)
> - if (WARN(tmp_map[j] == hwid, "Duplicate /cpu reg "
> - "properties in the DT\n"))
> - return;
> + if (WARN(tmp_map[j] == hwid32, " * %s node "
> + "duplicate cpu reg "
> + "property, skipped\n",
> + cpu->full_name))
> + goto next;
>
> /*
> * Build a stashed array of MPIDR values. Numbering scheme
> @@ -133,26 +154,29 @@ void __init arm_dt_init_cpu_maps(void)
> * logical map built from DT is validated and can be used
> * to override the map created in smp_setup_processor_id().
> */
> - if (hwid == mpidr) {
> + if (hwid32 == mpidr) {
> i = 0;
> bootcpu_valid = true;
> } else {
> i = cpuidx++;
> }
>
> - if (WARN(cpuidx > nr_cpu_ids, "DT /cpu %u nodes greater than "
> - "max cores %u, capping them\n",
> + if (WARN_ONCE(cpuidx > nr_cpu_ids, "DT cpu %u nodes greater"
> + " than max cores %u,"
> + " capping them\n",
> cpuidx, nr_cpu_ids)) {
> cpuidx = nr_cpu_ids;
> - break;
> + goto next;
> }
>
> - tmp_map[i] = hwid;
> + tmp_map[i] = hwid32;
> +next: ;
> }
> -
> - if (WARN(!bootcpu_valid, "DT missing boot CPU MPIDR[23:0], "
> - "fall back to default cpu_logical_map\n"))
> - return;
> + /*
> + * A DT missing the boot CPU MPIDR is a really bad omen
> + * Flag it up as such and force firmware/dtb updates
> + */
> + BUG_ON(!bootcpu_valid);
>
> /*
> * Since the boot CPU node contains proper data, and all nodes have
> --
> 1.7.12
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
More information about the devicetree-discuss
mailing list