[PATCH 5/8] ARM: at91: sam9g45: add lcd support

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
---
 arch/arm/boot/dts/at91sam9g45.dtsi |   47 ++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 6b1d4ca..ab8a8fc 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -322,6 +322,42 @@
 					};
 				};
 
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<4 0 0x1 0x0	/* PE0 periph A */
+							 4 2 0x1 0x0	/* PE2 periph A */
+							 4 3 0x1 0x0	/* PE3 periph A */
+							 4 4 0x1 0x0	/* PE4 periph A */
+							 4 5 0x1 0x0	/* PE5 periph A */
+							 4 6 0x1 0x0	/* PE6 periph A */
+							 4 7 0x1 0x0	/* PE7 periph A */
+							 4 8 0x1 0x0	/* PE8 periph A */
+							 4 9 0x1 0x0	/* PE9 periph A */
+							 4 10 0x1 0x0	/* PE10 periph A */
+							 4 11 0x1 0x0	/* PE11 periph A */
+							 4 12 0x1 0x0	/* PE12 periph A */
+							 4 13 0x1 0x0	/* PE13 periph A */
+							 4 14 0x1 0x0	/* PE14 periph A */
+							 4 15 0x1 0x0	/* PE15 periph A */
+							 4 16 0x1 0x0	/* PE16 periph A */
+							 4 17 0x1 0x0	/* PE17 periph A */
+							 4 18 0x1 0x0	/* PE18 periph A */
+							 4 19 0x1 0x0	/* PE19 periph A */
+							 4 20 0x1 0x0	/* PE20 periph A */
+							 4 21 0x1 0x0	/* PE21 periph A */
+							 4 22 0x1 0x0	/* PE22 periph A */
+							 4 23 0x1 0x0	/* PE23 periph A */
+							 4 24 0x1 0x0	/* PE24 periph A */
+							 4 25 0x1 0x0	/* PE25 periph A */
+							 4 26 0x1 0x0	/* PE26 periph A */
+							 4 27 0x1 0x0	/* PE27 periph A */
+							 4 28 0x1 0x0	/* PE28 periph A */
+							 4 29 0x1 0x0	/* PE29 periph A */
+							 4 30 0x1 0x0>;	/* PE30 periph A */
+					};
+				};
+
 				pioA: gpio at fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -533,6 +569,17 @@
 			};
 		};
 
+		fb0: fb at 0x00500000 {
+			compatible = "atmel,at91sam9g45-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 3 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		nand0: nand at 40000000 {
 			compatible = "atmel,at91rm9200-nand";
 			#address-cells = <1>;
-- 
1.7.10.4