[PATCHv8 10/19] pci: PCIe driver for Marvell Armada 370/XP systems
Bjorn Helgaas
bhelgaas at google.com
Wed Apr 10 07:12:58 EST 2013
On Tue, Apr 9, 2013 at 3:06 PM, Thomas Petazzoni
<thomas.petazzoni at free-electrons.com> wrote:
> This driver implements the support for the PCIe interfaces on the
> Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to
> cover earlier families of Marvell SoCs, such as Dove, Orion and
> Kirkwood.
>
> The driver implements the hw_pci operations needed by the core ARM PCI
> code to setup PCI devices and get their corresponding IRQs, and the
> pci_ops operations that are used by the PCI core to read/write the
> configuration space of PCI devices.
>
> Since the PCIe interfaces of Marvell SoCs are completely separate and
> not linked together in a bus, this driver sets up an emulated PCI host
> bridge, with one PCI-to-PCI bridge as child for each hardware PCIe
> interface.
>
> In addition, this driver enumerates the different PCIe slots, and for
> those having a device plugged in, it sets up the necessary address
> decoding windows, using the new armada_370_xp_alloc_pcie_window()
> function from mach-mvebu/addr-map.c.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
> Acked-by: Bjorn Helgaas <bhelgaas at google.com>
This and 06/19 look good to me.
> ---
> .../devicetree/bindings/pci/mvebu-pci.txt | 220 +++++
> drivers/pci/host/Kconfig | 4 +
> drivers/pci/host/Makefile | 2 +-
> drivers/pci/host/pci-mvebu.c | 879 ++++++++++++++++++++
> 4 files changed, 1104 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/pci/mvebu-pci.txt
> create mode 100644 drivers/pci/host/pci-mvebu.c
>
> diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
> new file mode 100644
> index 0000000..eb69d92
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
> @@ -0,0 +1,220 @@
> +* Marvell EBU PCIe interfaces
> +
> +Mandatory properties:
> +- compatible: one of the following values:
> + marvell,armada-370-pcie
> + marvell,armada-xp-pcie
> +- #address-cells, set to <3>
> +- #size-cells, set to <2>
> +- #interrupt-cells, set to <1>
> +- bus-range: PCI bus numbers covered
> +- device_type, set to "pci"
> +- ranges: ranges for the PCI memory and I/O regions, as well as the
> + MMIO registers to control the PCIe interfaces.
> +
> +In addition, the Device Tree node must have sub-nodes describing each
> +PCIe interface, having the following mandatory properties:
> +- reg: used only for interrupt mapping, so only the first four bytes
> + are used to refer to the correct bus number and device number.
> +- assigned-addresses: reference to the MMIO registers used to control
> + this PCIe interface.
> +- clocks: the clock associated to this PCIe interface
> +- marvell,pcie-port: the physical PCIe port number
> +- status: either "disabled" or "okay"
> +- device_type, set to "pci"
> +- #address-cells, set to <3>
> +- #size-cells, set to <2>
> +- #interrupt-cells, set to <1>
> +- ranges, empty property.
> +- interrupt-map-mask and interrupt-map, standard PCI properties to
> + define the mapping of the PCIe interface to interrupt numbers.
> +
> +and the following optional properties:
> +- marvell,pcie-lane: the physical PCIe lane number, for ports having
> + multiple lanes. If this property is not found, we assume that the
> + value is 0.
> +
> +Example:
> +
> +pcie-controller {
> + compatible = "marvell,armada-xp-pcie";
> + status = "disabled";
> + device_type = "pci";
> +
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + bus-range = <0x00 0xff>;
> +
> + ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */
> + 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */
> + 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */
> + 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */
> + 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */
> + 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */
> + 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */
> + 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */
> + 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */
> + 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */
> + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
> + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
> +
> + pcie at 1,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
> + reg = <0x0800 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &mpic 58>;
> + marvell,pcie-port = <0>;
> + marvell,pcie-lane = <0>;
> + clocks = <&gateclk 5>;
> + status = "disabled";
> + };
> +
> + pcie at 2,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>;
> + reg = <0x1000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &mpic 59>;
> + marvell,pcie-port = <0>;
> + marvell,pcie-lane = <1>;
> + clocks = <&gateclk 6>;
> + status = "disabled";
> + };
> +
> + pcie at 3,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>;
> + reg = <0x1800 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &mpic 60>;
> + marvell,pcie-port = <0>;
> + marvell,pcie-lane = <2>;
> + clocks = <&gateclk 7>;
> + status = "disabled";
> + };
> +
> + pcie at 4,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>;
> + reg = <0x2000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &mpic 61>;
> + marvell,pcie-port = <0>;
> + marvell,pcie-lane = <3>;
> + clocks = <&gateclk 8>;
> + status = "disabled";
> + };
> +
> + pcie at 5,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
> + reg = <0x2800 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &mpic 62>;
> + marvell,pcie-port = <1>;
> + marvell,pcie-lane = <0>;
> + clocks = <&gateclk 9>;
> + status = "disabled";
> + };
> +
> + pcie at 6,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>;
> + reg = <0x3000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &mpic 63>;
> + marvell,pcie-port = <1>;
> + marvell,pcie-lane = <1>;
> + clocks = <&gateclk 10>;
> + status = "disabled";
> + };
> +
> + pcie at 7,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>;
> + reg = <0x3800 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &mpic 64>;
> + marvell,pcie-port = <1>;
> + marvell,pcie-lane = <2>;
> + clocks = <&gateclk 11>;
> + status = "disabled";
> + };
> +
> + pcie at 8,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>;
> + reg = <0x4000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &mpic 65>;
> + marvell,pcie-port = <1>;
> + marvell,pcie-lane = <3>;
> + clocks = <&gateclk 12>;
> + status = "disabled";
> + };
> + pcie at 9,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>;
> + reg = <0x4800 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &mpic 99>;
> + marvell,pcie-port = <2>;
> + marvell,pcie-lane = <0>;
> + clocks = <&gateclk 26>;
> + status = "disabled";
> + };
> +
> + pcie at 10,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>;
> + reg = <0x5000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &mpic 103>;
> + marvell,pcie-port = <3>;
> + marvell,pcie-lane = <0>;
> + clocks = <&gateclk 27>;
> + status = "disabled";
> + };
> +};
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index cc3a1af..6918fbc 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -1,4 +1,8 @@
> menu "PCI host controller drivers"
> depends on PCI
>
> +config PCI_MVEBU
> + bool "Marvell EBU PCIe controller"
> + depends on ARCH_MVEBU
> +
> endmenu
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 636bc1a..5ea2d8b 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -1 +1 @@
> -# intentionally empty
> +obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
> diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
> new file mode 100644
> index 0000000..9c15a25
> --- /dev/null
> +++ b/drivers/pci/host/pci-mvebu.c
> @@ -0,0 +1,879 @@
> +/*
> + * PCIe driver for Marvell Armada 370 and Armada XP SoCs
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/mbus.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +
> +/*
> + * PCIe unit register offsets.
> + */
> +#define PCIE_DEV_ID_OFF 0x0000
> +#define PCIE_CMD_OFF 0x0004
> +#define PCIE_DEV_REV_OFF 0x0008
> +#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3))
> +#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
> +#define PCIE_HEADER_LOG_4_OFF 0x0128
> +#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
> +#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
> +#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
> +#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
> +#define PCIE_WIN5_CTRL_OFF 0x1880
> +#define PCIE_WIN5_BASE_OFF 0x1884
> +#define PCIE_WIN5_REMAP_OFF 0x188c
> +#define PCIE_CONF_ADDR_OFF 0x18f8
> +#define PCIE_CONF_ADDR_EN 0x80000000
> +#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
> +#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
> +#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
> +#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
> +#define PCIE_CONF_ADDR(bus, devfn, where) \
> + (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \
> + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \
> + PCIE_CONF_ADDR_EN)
> +#define PCIE_CONF_DATA_OFF 0x18fc
> +#define PCIE_MASK_OFF 0x1910
> +#define PCIE_MASK_ENABLE_INTS 0x0f000000
> +#define PCIE_CTRL_OFF 0x1a00
> +#define PCIE_CTRL_X1_MODE 0x0001
> +#define PCIE_STAT_OFF 0x1a04
> +#define PCIE_STAT_BUS 0xff00
> +#define PCIE_STAT_LINK_DOWN BIT(1)
> +#define PCIE_DEBUG_CTRL 0x1a60
> +#define PCIE_DEBUG_SOFT_RESET BIT(20)
> +
> +/*
> + * This product ID is registered by Marvell, and used when the Marvell
> + * SoC is not the root complex, but an endpoint on the PCIe bus. It is
> + * therefore safe to re-use this PCI ID for our emulated PCI-to-PCI
> + * bridge.
> + */
> +#define MARVELL_EMULATED_PCI_PCI_BRIDGE_ID 0x7846
> +
> +/* PCI configuration space of a PCI-to-PCI bridge */
> +struct mvebu_sw_pci_bridge {
> + u16 vendor;
> + u16 device;
> + u16 command;
> + u16 status;
> + u16 class;
> + u8 interface;
> + u8 revision;
> + u8 bist;
> + u8 header_type;
> + u8 latency_timer;
> + u8 cache_line_size;
> + u32 bar[2];
> + u8 primary_bus;
> + u8 secondary_bus;
> + u8 subordinate_bus;
> + u8 secondary_latency_timer;
> + u8 iobase;
> + u8 iolimit;
> + u16 secondary_status;
> + u16 membase;
> + u16 memlimit;
> + u16 prefmembase;
> + u16 prefmemlimit;
> + u32 prefbaseupper;
> + u32 preflimitupper;
> + u16 iobaseupper;
> + u16 iolimitupper;
> + u8 cappointer;
> + u8 reserved1;
> + u16 reserved2;
> + u32 romaddr;
> + u8 intline;
> + u8 intpin;
> + u16 bridgectrl;
> +};
> +
> +struct mvebu_pcie_port;
> +
> +/* Structure representing all PCIe interfaces */
> +struct mvebu_pcie {
> + struct platform_device *pdev;
> + struct mvebu_pcie_port *ports;
> + struct resource io;
> + struct resource realio;
> + struct resource mem;
> + struct resource busn;
> + int nports;
> +};
> +
> +/* Structure representing one PCIe interface */
> +struct mvebu_pcie_port {
> + char *name;
> + void __iomem *base;
> + spinlock_t conf_lock;
> + int haslink;
> + u32 port;
> + u32 lane;
> + int devfn;
> + struct clk *clk;
> + struct mvebu_sw_pci_bridge bridge;
> + struct device_node *dn;
> + struct mvebu_pcie *pcie;
> + phys_addr_t memwin_base;
> + size_t memwin_size;
> + phys_addr_t iowin_base;
> + size_t iowin_size;
> +};
> +
> +static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
> +{
> + return !(readl(port->base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
> +}
> +
> +static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
> +{
> + u32 stat;
> +
> + stat = readl(port->base + PCIE_STAT_OFF);
> + stat &= ~PCIE_STAT_BUS;
> + stat |= nr << 8;
> + writel(stat, port->base + PCIE_STAT_OFF);
> +}
> +
> +/*
> + * Setup PCIE BARs and Address Decode Wins:
> + * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
> + * WIN[0-3] -> DRAM bank[0-3]
> + */
> +static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
> +{
> + const struct mbus_dram_target_info *dram;
> + u32 size;
> + int i;
> +
> + dram = mv_mbus_dram_info();
> +
> + /* First, disable and clear BARs and windows. */
> + for (i = 1; i < 3; i++) {
> + writel(0, port->base + PCIE_BAR_CTRL_OFF(i));
> + writel(0, port->base + PCIE_BAR_LO_OFF(i));
> + writel(0, port->base + PCIE_BAR_HI_OFF(i));
> + }
> +
> + for (i = 0; i < 5; i++) {
> + writel(0, port->base + PCIE_WIN04_CTRL_OFF(i));
> + writel(0, port->base + PCIE_WIN04_BASE_OFF(i));
> + writel(0, port->base + PCIE_WIN04_REMAP_OFF(i));
> + }
> +
> + writel(0, port->base + PCIE_WIN5_CTRL_OFF);
> + writel(0, port->base + PCIE_WIN5_BASE_OFF);
> + writel(0, port->base + PCIE_WIN5_REMAP_OFF);
> +
> + /* Setup windows for DDR banks. Count total DDR size on the fly. */
> + size = 0;
> + for (i = 0; i < dram->num_cs; i++) {
> + const struct mbus_dram_window *cs = dram->cs + i;
> +
> + writel(cs->base & 0xffff0000,
> + port->base + PCIE_WIN04_BASE_OFF(i));
> + writel(0, port->base + PCIE_WIN04_REMAP_OFF(i));
> + writel(((cs->size - 1) & 0xffff0000) |
> + (cs->mbus_attr << 8) |
> + (dram->mbus_dram_target_id << 4) | 1,
> + port->base + PCIE_WIN04_CTRL_OFF(i));
> +
> + size += cs->size;
> + }
> +
> + /* Round up 'size' to the nearest power of two. */
> + if ((size & (size - 1)) != 0)
> + size = 1 << fls(size);
> +
> + /* Setup BAR[1] to all DRAM banks. */
> + writel(dram->cs[0].base, port->base + PCIE_BAR_LO_OFF(1));
> + writel(0, port->base + PCIE_BAR_HI_OFF(1));
> + writel(((size - 1) & 0xffff0000) | 1,
> + port->base + PCIE_BAR_CTRL_OFF(1));
> +}
> +
> +static void __init mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
> +{
> + u16 cmd;
> + u32 mask;
> +
> + /* Point PCIe unit MBUS decode windows to DRAM space. */
> + mvebu_pcie_setup_wins(port);
> +
> + /* Master + slave enable. */
> + cmd = readw(port->base + PCIE_CMD_OFF);
> + cmd |= PCI_COMMAND_IO;
> + cmd |= PCI_COMMAND_MEMORY;
> + cmd |= PCI_COMMAND_MASTER;
> + writew(cmd, port->base + PCIE_CMD_OFF);
> +
> + /* Enable interrupt lines A-D. */
> + mask = readl(port->base + PCIE_MASK_OFF);
> + mask |= PCIE_MASK_ENABLE_INTS;
> + writel(mask, port->base + PCIE_MASK_OFF);
> +}
> +
> +static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
> + struct pci_bus *bus,
> + u32 devfn, int where, int size, u32 *val)
> +{
> + writel(PCIE_CONF_ADDR(bus->number, devfn, where),
> + port->base + PCIE_CONF_ADDR_OFF);
> +
> + *val = readl(port->base + PCIE_CONF_DATA_OFF);
> +
> + if (size == 1)
> + *val = (*val >> (8 * (where & 3))) & 0xff;
> + else if (size == 2)
> + *val = (*val >> (8 * (where & 3))) & 0xffff;
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
> + struct pci_bus *bus,
> + u32 devfn, int where, int size, u32 val)
> +{
> + int ret = PCIBIOS_SUCCESSFUL;
> +
> + writel(PCIE_CONF_ADDR(bus->number, devfn, where),
> + port->base + PCIE_CONF_ADDR_OFF);
> +
> + if (size == 4)
> + writel(val, port->base + PCIE_CONF_DATA_OFF);
> + else if (size == 2)
> + writew(val, port->base + PCIE_CONF_DATA_OFF + (where & 3));
> + else if (size == 1)
> + writeb(val, port->base + PCIE_CONF_DATA_OFF + (where & 3));
> + else
> + ret = PCIBIOS_BAD_REGISTER_NUMBER;
> +
> + return ret;
> +}
> +
> +static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
> +{
> + phys_addr_t iobase;
> +
> + /* Are the new iobase/iolimit values invalid? */
> + if (port->bridge.iolimit < port->bridge.iobase ||
> + port->bridge.iolimitupper < port->bridge.iobaseupper) {
> +
> + /* If a window was configured, remove it */
> + if (port->iowin_base) {
> + mvebu_mbus_del_window(port->iowin_base,
> + port->iowin_size);
> + port->iowin_base = 0;
> + port->iowin_size = 0;
> + }
> +
> + return;
> + }
> +
> + /*
> + * We read the PCI-to-PCI bridge emulated registers, and
> + * calculate the base address and size of the address decoding
> + * window to setup, according to the PCI-to-PCI bridge
> + * specifications. iobase is the bus address, port->iowin_base
> + * is the CPU address.
> + */
> + iobase = ((port->bridge.iobase & 0xF0) << 8) |
> + (port->bridge.iobaseupper << 16);
> + port->iowin_base = port->pcie->io.start + iobase;
> + port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) |
> + (port->bridge.iolimitupper << 16)) -
> + iobase);
> +
> + mvebu_mbus_add_window_remap_flags(port->name, port->iowin_base,
> + port->iowin_size,
> + iobase,
> + MVEBU_MBUS_PCI_IO);
> +
> + pci_ioremap_io(iobase, port->iowin_base);
> +}
> +
> +static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
> +{
> + /* Are the new membase/memlimit values invalid? */
> + if (port->bridge.memlimit < port->bridge.membase) {
> +
> + /* If a window was configured, remove it */
> + if (port->memwin_base) {
> + mvebu_mbus_del_window(port->memwin_base,
> + port->memwin_size);
> + port->memwin_base = 0;
> + port->memwin_size = 0;
> + }
> +
> + return;
> + }
> +
> + /*
> + * We read the PCI-to-PCI bridge emulated registers, and
> + * calculate the base address and size of the address decoding
> + * window to setup, according to the PCI-to-PCI bridge
> + * specifications.
> + */
> + port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16);
> + port->memwin_size =
> + (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
> + port->memwin_base;
> +
> + mvebu_mbus_add_window_remap_flags(port->name, port->memwin_base,
> + port->memwin_size,
> + MVEBU_MBUS_NO_REMAP,
> + MVEBU_MBUS_PCI_MEM);
> +}
> +
> +/*
> + * Initialize the configuration space of the PCI-to-PCI bridge
> + * associated with the given PCIe interface.
> + */
> +static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port)
> +{
> + struct mvebu_sw_pci_bridge *bridge = &port->bridge;
> +
> + memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge));
> +
> + bridge->status = PCI_STATUS_CAP_LIST;
> + bridge->class = PCI_CLASS_BRIDGE_PCI;
> + bridge->vendor = PCI_VENDOR_ID_MARVELL;
> + bridge->device = MARVELL_EMULATED_PCI_PCI_BRIDGE_ID;
> + bridge->header_type = PCI_HEADER_TYPE_BRIDGE;
> + bridge->cache_line_size = 0x10;
> +
> + /* We support 32 bits I/O addressing */
> + bridge->iobase = PCI_IO_RANGE_TYPE_32;
> + bridge->iolimit = PCI_IO_RANGE_TYPE_32;
> +}
> +
> +/*
> + * Read the configuration space of the PCI-to-PCI bridge associated to
> + * the given PCIe interface.
> + */
> +static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port,
> + unsigned int where, int size, u32 *value)
> +{
> + struct mvebu_sw_pci_bridge *bridge = &port->bridge;
> +
> + switch (where & ~3) {
> + case PCI_VENDOR_ID:
> + *value = bridge->device << 16 | bridge->vendor;
> + break;
> +
> + case PCI_COMMAND:
> + *value = bridge->status << 16 | bridge->command;
> + break;
> +
> + case PCI_CLASS_REVISION:
> + *value = bridge->class << 16 | bridge->interface << 8 |
> + bridge->revision;
> + break;
> +
> + case PCI_CACHE_LINE_SIZE:
> + *value = bridge->bist << 24 | bridge->header_type << 16 |
> + bridge->latency_timer << 8 | bridge->cache_line_size;
> + break;
> +
> + case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
> + *value = bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4];
> + break;
> +
> + case PCI_PRIMARY_BUS:
> + *value = (bridge->secondary_latency_timer << 24 |
> + bridge->subordinate_bus << 16 |
> + bridge->secondary_bus << 8 |
> + bridge->primary_bus);
> + break;
> +
> + case PCI_IO_BASE:
> + *value = (bridge->secondary_status << 16 |
> + bridge->iolimit << 8 |
> + bridge->iobase);
> + break;
> +
> + case PCI_MEMORY_BASE:
> + *value = (bridge->memlimit << 16 | bridge->membase);
> + break;
> +
> + case PCI_PREF_MEMORY_BASE:
> + *value = (bridge->prefmemlimit << 16 | bridge->prefmembase);
> + break;
> +
> + case PCI_PREF_BASE_UPPER32:
> + *value = bridge->prefbaseupper;
> + break;
> +
> + case PCI_PREF_LIMIT_UPPER32:
> + *value = bridge->preflimitupper;
> + break;
> +
> + case PCI_IO_BASE_UPPER16:
> + *value = (bridge->iolimitupper << 16 | bridge->iobaseupper);
> + break;
> +
> + case PCI_ROM_ADDRESS1:
> + *value = 0;
> + break;
> +
> + default:
> + *value = 0xffffffff;
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> + }
> +
> + if (size == 2)
> + *value = (*value >> (8 * (where & 3))) & 0xffff;
> + else if (size == 1)
> + *value = (*value >> (8 * (where & 3))) & 0xff;
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +/* Write to the PCI-to-PCI bridge configuration space */
> +static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port,
> + unsigned int where, int size, u32 value)
> +{
> + struct mvebu_sw_pci_bridge *bridge = &port->bridge;
> + u32 mask, reg;
> + int err;
> +
> + if (size == 4)
> + mask = 0x0;
> + else if (size == 2)
> + mask = ~(0xffff << ((where & 3) * 8));
> + else if (size == 1)
> + mask = ~(0xff << ((where & 3) * 8));
> + else
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> +
> + err = mvebu_sw_pci_bridge_read(port, where & ~3, 4, ®);
> + if (err)
> + return err;
> +
> + value = (reg & mask) | value << ((where & 3) * 8);
> +
> + switch (where & ~3) {
> + case PCI_COMMAND:
> + bridge->command = value & 0xffff;
> + bridge->status = value >> 16;
> + break;
> +
> + case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
> + bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value;
> + break;
> +
> + case PCI_IO_BASE:
> + /*
> + * We also keep bit 1 set, it is a read-only bit that
> + * indicates we support 32 bits addressing for the
> + * I/O
> + */
> + bridge->iobase = (value & 0xff) | PCI_IO_RANGE_TYPE_32;
> + bridge->iolimit = ((value >> 8) & 0xff) | PCI_IO_RANGE_TYPE_32;
> + bridge->secondary_status = value >> 16;
> + mvebu_pcie_handle_iobase_change(port);
> + break;
> +
> + case PCI_MEMORY_BASE:
> + bridge->membase = value & 0xffff;
> + bridge->memlimit = value >> 16;
> + mvebu_pcie_handle_membase_change(port);
> + break;
> +
> + case PCI_PREF_MEMORY_BASE:
> + bridge->prefmembase = value & 0xffff;
> + bridge->prefmemlimit = value >> 16;
> + break;
> +
> + case PCI_PREF_BASE_UPPER32:
> + bridge->prefbaseupper = value;
> + break;
> +
> + case PCI_PREF_LIMIT_UPPER32:
> + bridge->preflimitupper = value;
> + break;
> +
> + case PCI_IO_BASE_UPPER16:
> + bridge->iobaseupper = value & 0xffff;
> + bridge->iolimitupper = value >> 16;
> + mvebu_pcie_handle_iobase_change(port);
> + break;
> +
> + case PCI_PRIMARY_BUS:
> + bridge->primary_bus = value & 0xff;
> + bridge->secondary_bus = (value >> 8) & 0xff;
> + bridge->subordinate_bus = (value >> 16) & 0xff;
> + bridge->secondary_latency_timer = (value >> 24) & 0xff;
> + mvebu_pcie_set_local_bus_nr(port, bridge->secondary_bus);
> + break;
> +
> + default:
> + break;
> + }
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
> +{
> + return sys->private_data;
> +}
> +
> +static struct mvebu_pcie_port *
> +mvebu_pcie_find_port(struct mvebu_pcie *pcie, struct pci_bus *bus,
> + int devfn)
> +{
> + int i;
> +
> + for (i = 0; i < pcie->nports; i++) {
> + struct mvebu_pcie_port *port = &pcie->ports[i];
> + if (bus->number == 0 && port->devfn == devfn)
> + return port;
> + if (bus->number != 0 &&
> + port->bridge.secondary_bus == bus->number)
> + return port;
> + }
> +
> + return NULL;
> +}
> +
> +/* PCI configuration space write function */
> +static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
> + int where, int size, u32 val)
> +{
> + struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
> + struct mvebu_pcie_port *port;
> + unsigned long flags;
> + int ret;
> +
> + port = mvebu_pcie_find_port(pcie, bus, devfn);
> + if (!port)
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +
> + /* Access the emulated PCI-to-PCI bridge */
> + if (bus->number == 0)
> + return mvebu_sw_pci_bridge_write(port, where, size, val);
> +
> + if (!port->haslink || PCI_SLOT(devfn) != 0)
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +
> + /* Access the real PCIe interface */
> + spin_lock_irqsave(&port->conf_lock, flags);
> + ret = mvebu_pcie_hw_wr_conf(port, bus,
> + PCI_DEVFN(1, PCI_FUNC(devfn)),
> + where, size, val);
> + spin_unlock_irqrestore(&port->conf_lock, flags);
> +
> + return ret;
> +}
> +
> +/* PCI configuration space read function */
> +static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
> + int size, u32 *val)
> +{
> + struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
> + struct mvebu_pcie_port *port;
> + unsigned long flags;
> + int ret;
> +
> + port = mvebu_pcie_find_port(pcie, bus, devfn);
> + if (!port) {
> + *val = 0xffffffff;
> + return PCIBIOS_DEVICE_NOT_FOUND;
> + }
> +
> + /* Access the emulated PCI-to-PCI bridge */
> + if (bus->number == 0)
> + return mvebu_sw_pci_bridge_read(port, where, size, val);
> +
> + if (!port->haslink || PCI_SLOT(devfn) != 0) {
> + *val = 0xffffffff;
> + return PCIBIOS_DEVICE_NOT_FOUND;
> + }
> +
> + /* Access the real PCIe interface */
> + spin_lock_irqsave(&port->conf_lock, flags);
> + ret = mvebu_pcie_hw_rd_conf(port, bus,
> + PCI_DEVFN(1, PCI_FUNC(devfn)),
> + where, size, val);
> + spin_unlock_irqrestore(&port->conf_lock, flags);
> +
> + return ret;
> +}
> +
> +static struct pci_ops mvebu_pcie_ops = {
> + .read = mvebu_pcie_rd_conf,
> + .write = mvebu_pcie_wr_conf,
> +};
> +
> +static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
> +{
> + struct mvebu_pcie *pcie = sys_to_pcie(sys);
> + int i;
> +
> + pci_add_resource_offset(&sys->resources, &pcie->realio, sys->io_offset);
> + pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
> + pci_add_resource(&sys->resources, &pcie->busn);
> +
> + for (i = 0; i < pcie->nports; i++) {
> + struct mvebu_pcie_port *port = &pcie->ports[i];
> + mvebu_pcie_setup_hw(port);
> + }
> +
> + return 1;
> +}
> +
> +static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> +{
> + struct of_irq oirq;
> + int ret;
> +
> + ret = of_irq_map_pci(dev, &oirq);
> + if (ret)
> + return ret;
> +
> + return irq_create_of_mapping(oirq.controller, oirq.specifier,
> + oirq.size);
> +}
> +
> +static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys)
> +{
> + struct mvebu_pcie *pcie = sys_to_pcie(sys);
> + struct pci_bus *bus;
> +
> + bus = pci_create_root_bus(&pcie->pdev->dev, sys->busnr,
> + &mvebu_pcie_ops, sys, &sys->resources);
> + if (!bus)
> + return NULL;
> +
> + pci_scan_child_bus(bus);
> +
> + return bus;
> +}
> +
> +resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
> + const struct resource *res,
> + resource_size_t start,
> + resource_size_t size,
> + resource_size_t align)
> +{
> + if (dev->bus->number != 0)
> + return start;
> +
> + /*
> + * On the PCI-to-PCI bridge side, the I/O windows must have at
> + * least a 64 KB size and be aligned on their size, and the
> + * memory windows must have at least a 1 MB size and be
> + * aligned on their size
> + */
> + if (res->flags & IORESOURCE_IO)
> + return round_up(start, max((resource_size_t)SZ_64K, size));
> + else if (res->flags & IORESOURCE_MEM)
> + return round_up(start, max((resource_size_t)SZ_1M, size));
> + else
> + return start;
> +}
> +
> +static void mvebu_pcie_enable(struct mvebu_pcie *pcie)
> +{
> + struct hw_pci hw;
> +
> + memset(&hw, 0, sizeof(hw));
> +
> + hw.nr_controllers = 1;
> + hw.private_data = (void **)&pcie;
> + hw.setup = mvebu_pcie_setup;
> + hw.scan = mvebu_pcie_scan_bus;
> + hw.map_irq = mvebu_pcie_map_irq;
> + hw.ops = &mvebu_pcie_ops;
> + hw.align_resource = mvebu_pcie_align_resource;
> +
> + pci_common_init(&hw);
> +}
> +
> +/*
> + * Looks up the list of register addresses encoded into the reg =
> + * <...> property for one that matches the given port/lane. Once
> + * found, maps it.
> + */
> +static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev,
> + struct device_node *np,
> + struct mvebu_pcie_port *port)
> +{
> + struct resource regs;
> + int ret = 0;
> +
> + ret = of_address_to_resource(np, 0, ®s);
> + if (ret)
> + return NULL;
> +
> + return devm_request_and_ioremap(&pdev->dev, ®s);
> +}
> +
> +static int __init mvebu_pcie_probe(struct platform_device *pdev)
> +{
> + struct mvebu_pcie *pcie;
> + struct device_node *np = pdev->dev.of_node;
> + struct of_pci_range range;
> + struct of_pci_range_parser parser;
> + struct device_node *child;
> + int i, ret;
> +
> + pcie = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_pcie),
> + GFP_KERNEL);
> + if (!pcie)
> + return -ENOMEM;
> +
> + pcie->pdev = pdev;
> +
> + if (of_pci_range_parser(&parser, np))
> + return -EINVAL;
> +
> + /* Get the I/O and memory ranges from DT */
> + for_each_of_pci_range(&parser, &range) {
> + unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
> + if (restype == IORESOURCE_IO) {
> + of_pci_range_to_resource(&range, np, &pcie->io);
> + of_pci_range_to_resource(&range, np, &pcie->realio);
> + pcie->io.name = "I/O";
> + pcie->realio.start = max_t(resource_size_t,
> + PCIBIOS_MIN_IO,
> + range.pci_addr);
> + pcie->realio.end = min_t(resource_size_t,
> + IO_SPACE_LIMIT,
> + range.pci_addr + range.size);
> + }
> + if (restype == IORESOURCE_MEM) {
> + of_pci_range_to_resource(&range, np, &pcie->mem);
> + pcie->mem.name = "MEM";
> + }
> + }
> +
> + /* Get the bus range */
> + ret = of_pci_parse_bus_range(np, &pcie->busn);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to parse bus-range property: %d\n",
> + ret);
> + return ret;
> + }
> +
> + for_each_child_of_node(pdev->dev.of_node, child) {
> + if (!of_device_is_available(child))
> + continue;
> + pcie->nports++;
> + }
> +
> + pcie->ports = devm_kzalloc(&pdev->dev, pcie->nports *
> + sizeof(struct mvebu_pcie_port),
> + GFP_KERNEL);
> + if (!pcie->ports)
> + return -ENOMEM;
> +
> + i = 0;
> + for_each_child_of_node(pdev->dev.of_node, child) {
> + struct mvebu_pcie_port *port = &pcie->ports[i];
> +
> + if (!of_device_is_available(child))
> + continue;
> +
> + port->pcie = pcie;
> +
> + if (of_property_read_u32(child, "marvell,pcie-port",
> + &port->port)) {
> + dev_warn(&pdev->dev,
> + "ignoring PCIe DT node, missing pcie-port property\n");
> + continue;
> + }
> +
> + if (of_property_read_u32(child, "marvell,pcie-lane",
> + &port->lane))
> + port->lane = 0;
> +
> + port->name = kasprintf(GFP_KERNEL, "pcie%d.%d",
> + port->port, port->lane);
> +
> + port->devfn = of_pci_get_devfn(child);
> + if (port->devfn < 0)
> + continue;
> +
> + port->base = mvebu_pcie_map_registers(pdev, child, port);
> + if (!port->base) {
> + dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",
> + port->port, port->lane);
> + continue;
> + }
> +
> + if (mvebu_pcie_link_up(port)) {
> + port->haslink = 1;
> + dev_info(&pdev->dev, "PCIe%d.%d: link up\n",
> + port->port, port->lane);
> + } else {
> + port->haslink = 0;
> + dev_info(&pdev->dev, "PCIe%d.%d: link down\n",
> + port->port, port->lane);
> + }
> +
> + port->clk = of_clk_get_by_name(child, NULL);
> + if (!port->clk) {
> + dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n",
> + port->port, port->lane);
> + iounmap(port->base);
> + port->haslink = 0;
> + continue;
> + }
> +
> + port->dn = child;
> +
> + clk_prepare_enable(port->clk);
> + spin_lock_init(&port->conf_lock);
> +
> + mvebu_sw_pci_bridge_init(port);
> +
> + i++;
> + }
> +
> + mvebu_pcie_enable(pcie);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mvebu_pcie_of_match_table[] = {
> + { .compatible = "marvell,armada-xp-pcie", },
> + { .compatible = "marvell,armada-370-pcie", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, mvebu_pcie_of_match_table);
> +
> +static struct platform_driver mvebu_pcie_driver = {
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "mvebu-pcie",
> + .of_match_table =
> + of_match_ptr(mvebu_pcie_of_match_table),
> + },
> +};
> +
> +static int mvebu_pcie_init(void)
> +{
> + return platform_driver_probe(&mvebu_pcie_driver,
> + mvebu_pcie_probe);
> +}
> +
> +subsys_initcall(mvebu_pcie_init);
> +
> +MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni at free-electrons.com>");
> +MODULE_DESCRIPTION("Marvell EBU PCIe driver");
> +MODULE_LICENSE("GPLv2");
> --
> 1.7.9.5
>
More information about the devicetree-discuss
mailing list