[PATCH 1/4] Documentation: Add memory mapped ARM architected timer binding

Mark Rutland mark.rutland at arm.com
Tue Apr 9 19:08:43 EST 2013


Hi Stephen,

On Tue, Apr 09, 2013 at 03:30:20AM +0100, Stephen Boyd wrote:
> Add a binding for the arm architected timer hardware's memory
> mapped interface. The mmio timer hardware is made up of one base
> frame and a collection of up to 8 timer frames, where each of the
> 8 timer frames can have either one or two views. A frame
> typically maps to a privilege level (user/kernel, hypervisor,
> secure). The first view has full access to the registers within a
> frame, while the second view can be restricted to particular
> registers within a frame. Each frame must support a physical
> timer. It's optional for a frame to support a virtual timer.
> 
> Cc: devicetree-discuss at lists.ozlabs.org
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Marc Zyngier <Marc.Zyngier at arm.com>
> Signed-off-by: Stephen Boyd <sboyd at codeaurora.org>
> ---
>  .../devicetree/bindings/arm/arch_timer.txt         | 62 ++++++++++++++++++++--
>  1 file changed, 59 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt
> index 20746e5..69ef711 100644
> --- a/Documentation/devicetree/bindings/arm/arch_timer.txt
> +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt
> @@ -1,10 +1,14 @@
>  * ARM architected timer
>  
> -ARM cores may have a per-core architected timer, which provides per-cpu timers.
> +ARM cores may have a per-core architected timer, which provides per-cpu timers,
> +or a memory mapped architected timer, which provides up to 8 frames with a
> +physical and optional virtual timer per frame.
>  
> -The timer is attached to a GIC to deliver its per-processor interrupts.
> +The per-core architected timer is attached to a GIC to deliver its
> +per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC
> +to deliver its interrupts via SPIs.
>  
> -** Timer node properties:
> +** CP15 Timer node properties:
>  
>  - compatible : Should at least contain one of
>  	"arm,armv7-timer"
> @@ -26,3 +30,55 @@ Example:
>  			     <1 10 0xf08>;
>  		clock-frequency = <100000000>;
>  	};
> +
> +** Memory mapped timer node properties
> +
> +- compatible : Should at least contain "arm,armv7-timer-mem".
> +
> +- #address-cells : Must be 1.

What about LPAE systems?

How about something like the following:

#address-cells : If the ranges property is empty, the same value as the
                 parent node's #address-cells property. Otherwise, a
		 value such that the ranges property specifies a
		 mapping to the parent node's address space.            

> +
> +- #size-cells : Must be 1.
> +
> +- ranges : Indicates parent and child bus address space are the same.
> +

Similarly, what if someone wants to write a more complex mapping for some
reason?

We should be able to handle it if we use the standard accessors.

> +- clock-frequency : The frequency of the main counter, in Hz. Optional.
> +
> +- reg : The control frame base address.
> +
> +Frame:
> +
> +- frame-id: Encoded as follows:
> +		bits[3:0]  frame number: 0 to 7.
> +		bits[10:8] frame usage:
> +			0 - user/kernel
> +			1 - hyp
> +			2 - secure
> +

Could we not just have a disabled status property for those frames claimed by a
higher level (either secure firmware or hypervisor)? Or have I missed something
here?

Then we'd just have a frame-number property, which is easier for humans to read
and understand.

> +- interrupts : Interrupt list for physical and virtual timers in that order.
> +  The virtual timer interrupt is optional.
> +
> +- reg : The first and second view base addresses in that order. The second view
> +  base address is optional.
> +
> +Example:
> +
> +	timer at f0000000 {
> +		compatible = "arm,armv7-timer-mem";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +		reg = <0xf0000000 0x1000>;
> +		clock-frequency = <50000000>;
> +		frame0 at f0001000 {
> +			frame-id = <0x0>
> +			interrupts = <0 13 0x8>,
> +				     <0 14 0x8>;
> +			reg = <0xf0001000 0x1000>,
> +			      <0xf0002000 0x1000>;
> +		};
> +		frame1 at f0003000 {
> +			frame-id = <0x11>
> +			interrupts = <0 15 0x8>;
> +			reg = <0xf0003000 0x1000>;
> +		};
> +	};
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
> 
> 

Mark.


More information about the devicetree-discuss mailing list