[PATCH 1/1] of/irq: store IRQ trigger/level in struct resource flags

[Javier Martinez Canillas]

On Tue, Apr 9, 2013 at 4:45 AM, Rob Herring <robherring2 at gmail.com> wrote:
> On 04/08/2013 05:56 PM, Javier Martinez Canillas wrote:
>> On 04/09/2013 12:16 AM, Stephen Warren wrote:
>>> On 04/08/2013 04:05 PM, Rob Herring wrote:
>>>> On 04/05/2013 02:48 AM, Javier Martinez Canillas wrote:
>>>>> According to Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
>>>>> the "#interrupt-cells" property of an "interrupt-controller" is used
>>>>> to define the number of cells needed to specify a single interrupt.
>>> ...
>>>>> But the type is never returned so it can't be saved on the IRQ struct
>>>>> resource flags member.
>>>>>
>>>>> This means that drivers that need the IRQ type/level flags defined in
>>>>> the DT won't be able to get it.
>>>>
>>>> But the interrupt controllers that need the information should be able
>>>> to get to it via irqd_get_trigger_type. What problem exactly are you
>>>> trying to fix? What driver would use this?
>>>
>>> FYI, that is indeed what I did in sound/soc/codecs/wm8903.c. Thinking
>>> back, I'm not sure if that was the right thing or whether I should have
>>> sent this same patch:-)
>>>
>>
>> Hi Stephen,
>>
>> I'm glad you agree :-)
>>
>> I could change drivers/net/ethernet/smsc/smsc911x.c to get the type flags for
>> the IRQ with irqd_get_trigger_type() but I prefer $subject because:
>
> irqd_get_trigger_type probably is not meant for outside of irqchips.
> Creating an irq_get_irq_type function which takes an irq number would be
> the right function as that does not expose struct irq_data.
>

Ok, I can add an irqd_get_trigger_type() that just return the flags to
the caller without exposing the struct irq_data and using it on the
SMSC 911x driver instead using struct resource *irq_res->flags

I hope networking folks understand why this change is needed in this
driver to get the type/level flags for an IRQ defined on a DT...

>> a) This works in the non-DT case with board files and filling the resources from
>> platform data in arch/arm/mach-omap2/gpmc-smsc911x.c. So this is definitely a
>> bug on the DT core.
>
> And hackery/abuse like this:
>
> arch/arm/mach-omap2/board-3630sdp.c:32:    .flags          =
> GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
>
>> b) I don't see why of_irq_to_resource() should discard the type/level flags when
>> filling the IORESOURCE_IRQ if it was specified on the DT.
>>
>> c) We will have to change all drivers that expect to get the IRQ type flags from
>> a IORESOURCE_IRQ struct resource.
>
> I'm not convinced that is a high number of drivers. Nearly all the
> occurrences of IORESOURCE_IRQ_ in drivers/ are for ISA (acpi/pnp) and
> drivers for ISA devices.
>

If IORESOURCE_IRQ is just supposed to be used for ISA devices drivers
that use ACPI/PnP instead DT, then of_irq_to_resource() callers should
just use irq_of_parse_and_map() that returns the virtual IRQ number
for an index within a controller instead of a struct resource.

In fact I wonder what's the point to have an of_irq_to_resource()
function at all if  IORESOURCE_IRQ is not supposed to be used for
devices connected through dumb buses that need a DT and the struct
resource will only hold the mapped virtual IRQ number and no the IRQ
flags.

> Rob
>

Best regards,
Javier