[PATCH/RFC 0/2] ARM: shmobile: DT irqpin for r8a7779 and marzen-reference

[Simon Horman]

On Thu, Apr 04, 2013 at 11:47:05PM +0200, Guennadi Liakhovetski wrote:
> Hi Simon
> 
> On Thu, 4 Apr 2013, Simon Horman wrote:
> 
> > On Wed, Apr 03, 2013 at 11:18:57AM +0200, Guennadi Liakhovetski wrote:
> > > Hi
> > > 
> > > This 2 patches add DT irqpin support on marzen-reference. Only 
> > > compile-tested due to the lack of hardware. The patches can go 
> > > independently via their respective trees. irqpin on marzen will not work 
> > > if patch 2 is applied before patch 1, but as long as there are no devices, 
> > > using irqpin interrupts, no breakage will be caused.
> > 
> > I have applied both patches and the dependency I mention below.
> > I have also applied the small patch, inlined below, to hook-up
> > the LAN controller. Unfortunately it doesn't seem to be receiving
> > any interrupts. Perhaps I am missing something?
> 
> Are you sure 28 is the correct number in the irqpin IRQ space? Seems 
> strange to me. Should be 1 perhaps (counting from 0), or 2 - not sure how 
> that mapping would look like.

Thanks!

0 seems to be the lucky number, I have SMSC (and NFS root) working
on marzen-reference.

I have posted "ARM: shmobile: marzen-reference: use irqpin for lan"

> > > Guennadi Liakhovetski (2):
> > >       irqchip: renesas-intc-irqpin: DT binding for sense bitfield width
> > 
> > The above patch depends on "[1/3] ARM: shmobile: irqpin: fix handling of
> > spurious interrupts in DT case", right?
> 
> Not functionally. Spurious interrupts occur on sh73a0, the sense bitfield 
> is needed for r8a7779. But the latter won't apply without the former, 
> that's right.

Thanks, could you reposts this series rebase so that it doesn't require
""[1/3] ARM: shmobile: irqpin: fix handling of spurious interrupts in DT case"
to apply cleanly.

Feel free to break the creation of
Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
into a separate patch.

Please add "ARM: shmobile: marzen-reference: use irqpin for lan" to
the end of the series with an Ack if you have no objections to it.

> > Has there been any progress in your
> > discussions with Magnus about what to do about that patch?
> 
> No, not yet.

Thanks, understood.

And thanks doubly for this series.
It is very nice to have bouth irqpin and ethernet working on
marzen-reference.