[PATCH v4 4/7] exynos4-is: Add common FIMC-IS image sensor driver

Sylwester Nawrocki s.nawrocki at samsung.com
Wed Apr 3 03:03:36 EST 2013


This patch adds a common image sensor driver and Makefile/Kconfig
to enable cpmpilation of the whole IS drives.

The sensor subdev driver currently only handles an image sensor's
power supplies and reset signal. There is no an I2C communication
as it is handled by the ISP's firmware.

Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---

Changes since v3:
 - dropped unused headers.
---
 drivers/media/platform/exynos4-is/Kconfig          |   11 +
 drivers/media/platform/exynos4-is/Makefile         |    3 +
 drivers/media/platform/exynos4-is/fimc-is-sensor.c |  322 ++++++++++++++++++++
 drivers/media/platform/exynos4-is/fimc-is-sensor.h |   83 +++++
 4 files changed, 419 insertions(+)
 create mode 100644 drivers/media/platform/exynos4-is/fimc-is-sensor.c
 create mode 100644 drivers/media/platform/exynos4-is/fimc-is-sensor.h

diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
index 0ffb6a4..57e9c7e 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -51,4 +51,15 @@ config VIDEO_EXYNOS_FIMC_LITE
 	  module will be called exynos-fimc-lite.
 endif
 
+config VIDEO_EXYNOS4_FIMC_IS
+	tristate "EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver"
+	select VIDEOBUF2_DMA_CONTIG
+	depends on OF
+	help
+	  This is a V4L2 driver for Samsung EXYNOS4x12 SoC series
+	  FIMC-IS (Imaging Subsystem).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called exynos4-fimc-is.
+
 endif # VIDEO_SAMSUNG_S5P_FIMC
diff --git a/drivers/media/platform/exynos4-is/Makefile b/drivers/media/platform/exynos4-is/Makefile
index 8c67441..f25f463 100644
--- a/drivers/media/platform/exynos4-is/Makefile
+++ b/drivers/media/platform/exynos4-is/Makefile
@@ -1,7 +1,10 @@
 s5p-fimc-objs := fimc-core.o fimc-reg.o fimc-m2m.o fimc-capture.o media-dev.o
 exynos-fimc-lite-objs += fimc-lite-reg.o fimc-lite.o
+exynos-fimc-is-objs := fimc-is.o fimc-isp.o fimc-is-sensor.o fimc-is-regs.o
+exynos-fimc-is-objs += fimc-is-param.o fimc-is-errno.o fimc-is-i2c.o
 s5p-csis-objs := mipi-csis.o
 
 obj-$(CONFIG_VIDEO_S5P_MIPI_CSIS)	+= s5p-csis.o
 obj-$(CONFIG_VIDEO_EXYNOS_FIMC_LITE)	+= exynos-fimc-lite.o
+obj-$(CONFIG_VIDEO_EXYNOS4_FIMC_IS)	+= exynos-fimc-is.o
 obj-$(CONFIG_VIDEO_S5P_FIMC)		+= s5p-fimc.o
diff --git a/drivers/media/platform/exynos4-is/fimc-is-sensor.c b/drivers/media/platform/exynos4-is/fimc-is-sensor.c
new file mode 100644
index 0000000..02b2719
--- /dev/null
+++ b/drivers/media/platform/exynos4-is/fimc-is-sensor.c
@@ -0,0 +1,322 @@
+/*
+ * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *
+ * Author: Sylwester Nawrocki <s.nawrocki at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <media/v4l2-subdev.h>
+
+#include "fimc-is.h"
+#include "fimc-is-sensor.h"
+
+#define DRIVER_NAME "FIMC-IS-SENSOR"
+
+static const char * const sensor_supply_names[] = {
+	"svdda",
+	"svddio",
+};
+
+static const struct v4l2_mbus_framefmt fimc_is_sensor_formats[] = {
+	{
+		.code = V4L2_MBUS_FMT_SGRBG10_1X10,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.field = V4L2_FIELD_NONE,
+	}
+};
+
+static struct fimc_is_sensor *sd_to_fimc_is_sensor(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct fimc_is_sensor, subdev);
+}
+
+static const struct v4l2_mbus_framefmt *find_sensor_format(
+	struct v4l2_mbus_framefmt *mf)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(fimc_is_sensor_formats); i++)
+		if (mf->code == fimc_is_sensor_formats[i].code)
+			return &fimc_is_sensor_formats[i];
+
+	return &fimc_is_sensor_formats[0];
+}
+
+static int fimc_is_sensor_enum_mbus_code(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->index >= ARRAY_SIZE(fimc_is_sensor_formats))
+		return -EINVAL;
+
+	code->code = fimc_is_sensor_formats[code->index].code;
+	return 0;
+}
+
+static void fimc_is_sensor_try_format(struct fimc_is_sensor *sensor,
+				      struct v4l2_mbus_framefmt *mf)
+{
+	const struct sensor_drv_data *dd = sensor->drvdata;
+	const struct v4l2_mbus_framefmt *fmt;
+
+	fmt = find_sensor_format(mf);
+	mf->code = fmt->code;
+	v4l_bound_align_image(&mf->width, 16 + 8, dd->width, 0,
+			      &mf->height, 12 + 8, dd->height, 0, 0);
+}
+
+static struct v4l2_mbus_framefmt *__fimc_is_sensor_get_format(
+		struct fimc_is_sensor *sensor, struct v4l2_subdev_fh *fh,
+		u32 pad, enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return fh ? v4l2_subdev_get_try_format(fh, pad) : NULL;
+
+	return &sensor->format;
+}
+
+static int fimc_is_sensor_set_fmt(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_format *fmt)
+{
+	struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
+	struct v4l2_mbus_framefmt *mf;
+
+	fimc_is_sensor_try_format(sensor, &fmt->format);
+
+	mf = __fimc_is_sensor_get_format(sensor, fh, fmt->pad, fmt->which);
+	if (mf) {
+		mutex_lock(&sensor->lock);
+		if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+			*mf = fmt->format;
+		mutex_unlock(&sensor->lock);
+	}
+	return 0;
+}
+
+static int fimc_is_sensor_get_fmt(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_format *fmt)
+{
+	struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
+	struct v4l2_mbus_framefmt *mf;
+
+	mf = __fimc_is_sensor_get_format(sensor, fh, fmt->pad, fmt->which);
+
+	mutex_lock(&sensor->lock);
+	fmt->format = *mf;
+	mutex_unlock(&sensor->lock);
+	return 0;
+}
+
+static struct v4l2_subdev_pad_ops fimc_is_sensor_pad_ops = {
+	.enum_mbus_code	= fimc_is_sensor_enum_mbus_code,
+	.get_fmt	= fimc_is_sensor_get_fmt,
+	.set_fmt	= fimc_is_sensor_set_fmt,
+};
+
+static int fimc_is_sensor_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0);
+
+	*format		= fimc_is_sensor_formats[0];
+	format->width	= FIMC_IS_SENSOR_DEF_PIX_WIDTH;
+	format->height	= FIMC_IS_SENSOR_DEF_PIX_HEIGHT;
+
+	return 0;
+}
+
+static const struct v4l2_subdev_internal_ops fimc_is_sensor_sd_internal_ops = {
+	.open = fimc_is_sensor_open,
+};
+
+static int fimc_is_sensor_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct fimc_is_sensor *sensor = v4l2_get_subdevdata(sd);
+	int gpio = sensor->gpio_reset;
+	int ret;
+
+	if (on) {
+		ret = pm_runtime_get(sensor->dev);
+		if (ret < 0)
+			return ret;
+
+		ret = regulator_bulk_enable(SENSOR_NUM_SUPPLIES,
+					    sensor->supplies);
+		if (ret < 0) {
+			pm_runtime_put(sensor->dev);
+			return ret;
+		}
+		if (gpio_is_valid(gpio)) {
+			gpio_set_value(gpio, 1);
+			usleep_range(600, 800);
+			gpio_set_value(gpio, 0);
+			usleep_range(10000, 11000);
+			gpio_set_value(gpio, 1);
+		}
+
+		/* A delay needed for the sensor initialization. */
+		msleep(20);
+	} else {
+		if (gpio_is_valid(gpio))
+			gpio_set_value(gpio, 0);
+
+		ret = regulator_bulk_disable(SENSOR_NUM_SUPPLIES,
+					     sensor->supplies);
+		if (!ret)
+			pm_runtime_put(sensor->dev);
+	}
+
+	pr_info("%s:%d: on: %d, ret: %d\n", __func__, __LINE__, on, ret);
+
+	return ret;
+}
+
+static struct v4l2_subdev_core_ops fimc_is_sensor_core_ops = {
+	.s_power = fimc_is_sensor_s_power,
+};
+
+static struct v4l2_subdev_ops fimc_is_sensor_subdev_ops = {
+	.core = &fimc_is_sensor_core_ops,
+	.pad = &fimc_is_sensor_pad_ops,
+};
+
+static const struct of_device_id fimc_is_sensor_of_match[];
+
+static int fimc_is_sensor_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct fimc_is_sensor *sensor;
+	const struct of_device_id *of_id;
+	struct v4l2_subdev *sd;
+	int gpio, i, ret;
+
+	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
+	if (!sensor)
+		return -ENOMEM;
+
+	mutex_init(&sensor->lock);
+	sensor->gpio_reset = -EINVAL;
+
+	gpio = of_get_gpio_flags(dev->of_node, 0, NULL);
+	if (gpio_is_valid(gpio)) {
+		ret = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, DRIVER_NAME);
+		if (ret < 0)
+			return ret;
+	}
+	sensor->gpio_reset = gpio;
+
+	for (i = 0; i < SENSOR_NUM_SUPPLIES; i++)
+		sensor->supplies[i].supply = sensor_supply_names[i];
+
+	ret = devm_regulator_bulk_get(&client->dev, SENSOR_NUM_SUPPLIES,
+				      sensor->supplies);
+	if (ret < 0)
+		goto err_gpio;
+
+	of_id = of_match_node(fimc_is_sensor_of_match, dev->of_node);
+	if (!of_id) {
+		ret = -ENODEV;
+		goto err_reg;
+	}
+
+	sensor->drvdata = of_id->data;
+	sensor->dev = dev;
+
+	sd = &sensor->subdev;
+	v4l2_i2c_subdev_init(sd, client, &fimc_is_sensor_subdev_ops);
+	snprintf(sd->name, sizeof(sd->name), sensor->drvdata->subdev_name);
+	sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	sensor->format.code = fimc_is_sensor_formats[0].code;
+	sensor->format.width = FIMC_IS_SENSOR_DEF_PIX_WIDTH;
+	sensor->format.height = FIMC_IS_SENSOR_DEF_PIX_HEIGHT;
+
+	sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
+	ret = media_entity_init(&sd->entity, 1, &sensor->pad, 0);
+	if (ret < 0)
+		goto err_reg;
+
+	v4l2_set_subdevdata(sd, sensor);
+	pm_runtime_no_callbacks(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+err_reg:
+	regulator_bulk_free(SENSOR_NUM_SUPPLIES, sensor->supplies);
+err_gpio:
+	if (gpio_is_valid(sensor->gpio_reset))
+		gpio_free(sensor->gpio_reset);
+	return ret;
+}
+
+static int fimc_is_sensor_remove(struct i2c_client *client)
+{
+	struct fimc_is_sensor *sensor;
+
+	regulator_bulk_free(SENSOR_NUM_SUPPLIES, sensor->supplies);
+	media_entity_cleanup(&sensor->subdev.entity);
+
+	return 0;
+}
+
+static const struct i2c_device_id fimc_is_sensor_ids[] = {
+	{ }
+};
+
+static const struct sensor_drv_data s5k6a3_drvdata = {
+	.id		= FIMC_IS_SENSOR_ID_S5K6A3,
+	.subdev_name	= "S5K6A3",
+	.width		= S5K6A3_SENSOR_WIDTH,
+	.height		= S5K6A3_SENSOR_HEIGHT,
+};
+
+static const struct of_device_id fimc_is_sensor_of_match[] = {
+	{
+		.compatible	= "samsung,s5k6a3",
+		.data		= &s5k6a3_drvdata,
+	},
+	{  }
+};
+MODULE_DEVICE_TABLE(of, fimc_is_sensor_of_match);
+
+static struct i2c_driver fimc_is_sensor_driver = {
+	.driver = {
+		.of_match_table	= fimc_is_sensor_of_match,
+		.name		= DRIVER_NAME,
+		.owner		= THIS_MODULE,
+	},
+	.probe		= fimc_is_sensor_probe,
+	.remove		= fimc_is_sensor_remove,
+	.id_table	= fimc_is_sensor_ids,
+};
+
+int fimc_is_register_sensor_driver(void)
+{
+	return i2c_add_driver(&fimc_is_sensor_driver);
+}
+
+void fimc_is_unregister_sensor_driver(void)
+{
+	i2c_del_driver(&fimc_is_sensor_driver);
+}
+
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki at samsung.com>");
+MODULE_DESCRIPTION("Exynos4x12 FIMC-IS image sensor subdev driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/exynos4-is/fimc-is-sensor.h b/drivers/media/platform/exynos4-is/fimc-is-sensor.h
new file mode 100644
index 0000000..50b8e4d
--- /dev/null
+++ b/drivers/media/platform/exynos4-is/fimc-is-sensor.h
@@ -0,0 +1,83 @@
+/*
+ * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *
+ * Authors:  Sylwester Nawrocki <s.nawrocki at samsung.com>
+ *	     Younghwan Joo <yhwan.joo at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef FIMC_IS_SENSOR_H_
+#define FIMC_IS_SENSOR_H_
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-subdev.h>
+
+#define FIMC_IS_SENSOR_OPEN_TIMEOUT	2000 /* ms */
+
+#define FIMC_IS_SENSOR_DEF_PIX_WIDTH	1296
+#define FIMC_IS_SENSOR_DEF_PIX_HEIGHT	732
+
+#define S5K6A3_SENSOR_WIDTH		1392
+#define S5K6A3_SENSOR_HEIGHT		1392
+
+#define SENSOR_NUM_SUPPLIES		2
+
+enum fimc_is_sensor_id {
+	FIMC_IS_SENSOR_ID_S5K3H2 = 1,
+	FIMC_IS_SENSOR_ID_S5K6A3,
+	FIMC_IS_SENSOR_ID_S5K4E5,
+	FIMC_IS_SENSOR_ID_S5K3H7,
+	FIMC_IS_SENSOR_ID_CUSTOM,
+	FIMC_IS_SENSOR_ID_END
+};
+
+#define IS_SENSOR_CTRL_BUS_I2C0		0
+#define IS_SENSOR_CTRL_BUS_I2C1		1
+
+struct sensor_drv_data {
+	enum fimc_is_sensor_id id;
+	const char * const subdev_name;
+	unsigned int width;
+	unsigned int height;
+};
+
+/**
+ * struct fimc_is_sensor - fimc-is sensor data structure
+ * @dev: pointer to this I2C client device structure
+ * @subdev: the image sensor's v4l2 subdev
+ * @pad: subdev media source pad
+ * @supplies: image sensor's voltage regulator supplies
+ * @gpio_reset: GPIO connected to the sensor's reset pin
+ * @drvdata: a pointer to the sensor's parameters data structure
+ * @i2c_bus: ISP I2C bus index (0...1)
+ * @test_pattern: true to enable video test pattern
+ * @lock: mutex protecting the structure's members below
+ * @format: media bus format at the sensor's source pad
+ */
+struct fimc_is_sensor {
+	struct device *dev;
+	struct v4l2_subdev subdev;
+	struct media_pad pad;
+	struct regulator_bulk_data supplies[SENSOR_NUM_SUPPLIES];
+	int gpio_reset;
+	const struct sensor_drv_data *drvdata;
+	unsigned int i2c_bus;
+	bool test_pattern;
+
+	struct mutex lock;
+	struct v4l2_mbus_framefmt format;
+};
+
+int fimc_is_register_sensor_driver(void);
+void fimc_is_unregister_sensor_driver(void);
+
+#endif /* FIMC_IS_SENSOR_H_ */
-- 
1.7.9.5



More information about the devicetree-discuss mailing list