[PATCH V2] DMA: PL330: Add check if device tree compatible

[Vinod Koul]

On Mon, Apr 01, 2013 at 08:13:31AM -0500, Rob Herring wrote:
> On Thu, Mar 21, 2013 at 4:39 AM, Vinod Koul <vinod.koul at intel.com> wrote:
> > On Tue, Mar 05, 2013 at 02:55:31PM +0530, Padmavathi Venna wrote:
> >> This patch register the dma controller with generic dma helpers only
> >> in DT case. This also adds some extra error handling in the driver.
> >>
> >> Signed-off-by: Padmavathi Venna <padma.v at samsung.com>
> >> Reported-by: Sachin Kamat <sachin.kamat at linaro.org>
> 
> What's the status on this? It is needed for 3.9 to fix pl330 on highbank.
Well the status is that submitter has been rude. I had few questions and
comments on this patch and they are yet to be addressed.

--
~Vinod
> 
> Rob
> 
> >> ---
> >>
> >> Based on Vinod Koul next branch.
> >>
> >> Changes since V1:
> >>       - return silently when of_dma_controller_register fails, as
> >>         suggested by Arnd.
> >>
> >>  drivers/dma/pl330.c |   38 +++++++++++++++++++++++++++-----------
> >>  1 files changed, 27 insertions(+), 11 deletions(-)
> >>
> >> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> >> index 7181531..5dbc594 100644
> >> --- a/drivers/dma/pl330.c
> >> +++ b/drivers/dma/pl330.c
> >> @@ -2882,7 +2882,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
> >>  {
> >>       struct dma_pl330_platdata *pdat;
> >>       struct dma_pl330_dmac *pdmac;
> >> -     struct dma_pl330_chan *pch;
> >> +     struct dma_pl330_chan *pch, *_p;
> >>       struct pl330_info *pi;
> >>       struct dma_device *pd;
> >>       struct resource *res;
> >> @@ -2984,7 +2984,16 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
> >>       ret = dma_async_device_register(pd);
> >>       if (ret) {
> >>               dev_err(&adev->dev, "unable to register DMAC\n");
> >> -             goto probe_err2;
> >> +             goto probe_err3;
> >> +     }
> >> +
> >> +     if (adev->dev.of_node) {
> >> +             ret = of_dma_controller_register(adev->dev.of_node,
> >> +                                      of_dma_pl330_xlate, pdmac);
> >> +             if (ret) {
> >> +                     dev_err(&adev->dev,
> >> +                     "unable to register DMA to the generic DT DMA helpers\n");
> > Indent?
> >> +             }
> >>       }
> >>
> >>       dev_info(&adev->dev,
> >> @@ -2995,16 +3004,21 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
> >>               pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
> >>               pi->pcfg.num_peri, pi->pcfg.num_events);
> >>
> >> -     ret = of_dma_controller_register(adev->dev.of_node,
> >> -                                      of_dma_pl330_xlate, pdmac);
> >> -     if (ret) {
> >> -             dev_err(&adev->dev,
> >> -             "unable to register DMA to the generic DT DMA helpers\n");
> >> -             goto probe_err2;
> >> -     }
> >> -
> >>       return 0;
> >> +probe_err3:
> >> +     amba_set_drvdata(adev, NULL);
> >>
> >> +     /* Idle the DMAC */
> >> +     list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
> >> +                     chan.device_node) {
> >> +
> >> +             /* Remove the channel */
> >> +             list_del(&pch->chan.device_node);
> >> +
> >> +             /* Flush the channel */
> >> +             pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
> >> +             pl330_free_chan_resources(&pch->chan);
> > free_chan for error handling in probe?
> >
> >> +     }
> >>  probe_err2:
> >>       pl330_del(pi);
> >>  probe_err1:
> >> @@ -3023,8 +3037,10 @@ static int pl330_remove(struct amba_device *adev)
> >>       if (!pdmac)
> >>               return 0;
> >>
> >> -     of_dma_controller_free(adev->dev.of_node);
> >> +     if (adev->dev.of_node)
> >> +             of_dma_controller_free(adev->dev.of_node);
> >>
> >> +     dma_async_device_unregister(&pdmac->ddma);
> >>       amba_set_drvdata(adev, NULL);
> >>
> >>       /* Idle the DMAC */
> >> --
> >> 1.7.4.4
> >>