[PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy

Cousson, Benoit b-cousson at ti.com
Fri Sep 28 08:48:42 EST 2012


On 9/27/2012 7:24 AM, Rob Herring wrote:
> On 09/25/2012 05:06 AM, ABRAHAM, KISHON VIJAY wrote:
>> Hi,
>>
>> On Mon, Sep 24, 2012 at 6:45 PM, Rob Herring <robherring2 at gmail.com> wrote:
>>> On 09/06/2012 09:57 AM, Kishon Vijay Abraham I wrote:
>>>> All phy related programming like enabling/disabling the clocks, powering
>>>> on/off the phy is taken care of by this driver. It is also used for OTG
>>>> related functionality like srp.
>>>>
>>>> This also includes device tree support for usb2 phy driver and
>>>> the documentation with device tree binding information is updated.
>>>>
>>>> Currently writing to control module register is taken care in this
>>>> driver which will be removed once the control module driver is in place.
>>>>
>>>> Cc: Felipe Balbi <balbi at ti.com>
>>>> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
>>>> ---
>>>>   Documentation/devicetree/bindings/usb/usb-phy.txt |   17 ++
>>>>   drivers/usb/phy/Kconfig                           |    9 +
>>>>   drivers/usb/phy/Makefile                          |    1 +
>>>>   drivers/usb/phy/omap-usb2.c                       |  271 +++++++++++++++++++++
>>>>   include/linux/usb/omap_usb.h                      |   46 ++++
>>>>   include/linux/usb/phy_companion.h                 |   34 +++
>>>>   6 files changed, 378 insertions(+)
>>>>   create mode 100644 Documentation/devicetree/bindings/usb/usb-phy.txt
>>>>   create mode 100644 drivers/usb/phy/omap-usb2.c
>>>>   create mode 100644 include/linux/usb/omap_usb.h
>>>>   create mode 100644 include/linux/usb/phy_companion.h
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>> new file mode 100644
>>>> index 0000000..80d4148
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>>>
>>> This is a very generic name...
>>>
>>>> @@ -0,0 +1,17 @@
>>>> +USB PHY
>>>> +
>>>> +OMAP USB2 PHY
>>>> +
>>>> +Required properties:
>>>> + - compatible: Should be "ti,omap-usb2"
>>>
>>> ...for a specific phy. However, I do think a generic binding to describe
>>> host ctrlr to phy connections is needed.
>>>
>>>> + - reg : Address and length of the register set for the device. Also
>>>> +add the address of control module dev conf register until a driver for
>>>> +control module is added
>>>
>>> The dts should describe the h/w, not what you need for the current
>>> driver. The 2nd reg field does not belong here.
>>
>> Indeed. This was discussed and agreed upon as a interim solution till
>> we have a control module driver in place to write to the control
>> module register.
>
> Discussed where and agreed by who? I for one do not agree.

Yeah, what was tolerated was the addition of that address inside hwmod 
data, but I do agree that it should not go into DTS.

Regards,
Benoit



More information about the devicetree-discuss mailing list