[PATCH 4/4] mfd: max8907: remove regulator-compatible from DT docs

[Stephen Warren]

From: Stephen Warren <swarren at nvidia.com>

Commit "regulator: deprecate regulator-compatible DT property" deprecated
the use of the regulator-compatible DT property. Update the DT example in
the MAX8907 binding documentation to reflect this.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
This commit is based on the MFD branch.
---
 .../devicetree/bindings/regulator/max8907.txt      |   24 ++++++-------------
 1 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt
index 51e683b..371eccd 100644
--- a/Documentation/devicetree/bindings/regulator/max8907.txt
+++ b/Documentation/devicetree/bindings/regulator/max8907.txt
@@ -12,15 +12,16 @@ Required properties:
 ...
 - in20-supply: The input supply for LDO20.
 - regulators: A node that houses a sub-node for each regulator within the
-  device. Each sub-node is identified using the regulator-compatible
-  property, with valid values listed below. The content of each sub-node
-  is defined by the standard binding for regulators; see regulator.txt.
+  device. Each sub-node is identified using the node's name (or the deprecated
+  regulator-compatible property if present), with valid values listed below.
+  The content of each sub-node is defined by the standard binding for
+  regulators; see regulator.txt.
 
 Optional properties:
 - maxim,system-power-controller: Boolean property indicating that the PMIC
   controls the overall system power.
 
-Valid regulator-compatible values are:
+The valid names for regulators are:
 
   sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10,
   ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v,
@@ -42,30 +43,21 @@ Example:
 			...
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				mbatt_reg: regulator at 0 {
-					reg = <0>;
-					regulator-compatible = "mbatt";
+				mbatt_reg: mbatt {
 					regulator-name = "vbat_pmu";
 					regulator-min-microvolt = <5000000>;
 					regulator-max-microvolt = <5000000>;
 					regulator-always-on;
 				};
 
-				regulator at 1 {
-					reg = <1>;
-					regulator-compatible = "sd1";
+				sd1 {
 					regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
 				};
 
-				regulator at 2 {
-					reg = <2>;
-					regulator-compatible = "sd2";
+				sd2 {
 					regulator-name = "nvvdd_sv2,vdd_core";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
-- 
1.7.0.4