[PATCH] input: pwm-beeper: Add devicetree probing support

[Sascha Hauer]

On Mon, Sep 24, 2012 at 09:05:59PM +0200, Lars-Peter Clausen wrote:
> On 09/24/2012 08:49 PM, Sascha Hauer wrote:
> > 
> > My bad, I missed that platform_data is casted to an unsigned long. I
> > thought I would test for a pointer.
> > The obvious clean way would be to use a pointer for platform_data, but
> > given that this will vanish anyway soon, I think we could just test for
> > existence of dev->of_node instead of dev->platform_data.
> 
> I think the plan is to convert the existing board file platforms to pwm_table
> and then remove the old pwm_request API. So this wouldn't work too well if we'd
> test for of_node. Maybe we can just run pwm_get unconditionally and fallback to
> pwm_request if it failed. That's also what the PWM backlight driver currently does.

Fine with me.

> 
> > 
> >>
> >> Yes, this a bit tricky, but we only have a single in-tree user of the
> >> pwm-beeper which uses a id != 0. And now that all the PWM providers have
> >> been converted to the new generic PWM framework the old legacy API will go
> >> away soon anyway. So this if () else branch should hopefully only be
> >> necessary for a transitional period of 1-2 releases. So I think this change
> >> should be OK.
> >>
> >> But I think the patch is missing a change to the Kconfig entry to allow the
> >> driver to be selected if the generic PWM framework is available.
> >>
> >> --- a/drivers/input/misc/Kconfig
> >> +++ b/drivers/input/misc/Kconfig
> >> @@ -444,7 +444,7 @@ config INPUT_PCF8574
> >>
> >>  config INPUT_PWM_BEEPER
> >>  	tristate "PWM beeper support"
> >> -	depends on HAVE_PWM
> >> +	depends on HAVE_PWM || PWM
> > 
> > Is this the preferred way to do this? Instead of doing the above I added
> > a 'select HAVE_PWM' to the pwm framework instead. I found a patch for that,
> > but there were comments to it that this is not good
> > 
> 
> Thierry said that this is his preferred solution. Given that HAVE_PWM will be
> extinct soon anyway I think it is fine.

Ok. Will send an updated patch tomorrow.

Thanks
 Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |