[PATCH 2/2] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm

Arnd Bergmann arnd at arndb.de
Fri Sep 14 18:26:06 EST 2012


On Thursday 13 September 2012, AnilKumar Ch wrote:
> Add lis331dlh device tree data to am335x-evm.dts. In AM335x EVM
> lis331dlh accelerometer is connected to I2C2 bus. So this patch
> change the status to "okay" to use I2C2 bus. Also added all the
> required platform data to am335x-evm.
> 
> Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
> ---
>  arch/arm/boot/dts/am335x-evm.dts |   42 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index 9fb59c5..9e5a878 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -47,6 +47,15 @@
>  			};
>  		};
>  
> +		i2c2: i2c at 4802a000 {
> +			status = "okay";
> +			clock-frequency = <400000>;
> +
> +			lis331dlh: lis331dlh at 18 {
> +				reg = <0x18>;
> +			};
> +		};

Why do you put the "reg" property here

>  		dcan1: d_can at 481d0000 {
>  			status = "okay";
>  			pinctrl-names = "default";
> @@ -61,6 +70,39 @@
>  		regulator-max-microvolt = <5000000>;
>  		regulator-boot-on;
>  	};
> +
> +	lis3_reg: fixedregulator at 1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "lis3_reg";
> +		regulator-boot-on;
> +	};
> +};
> +&lis331dlh {
> +	compatible = "st,lis3lv02d-i2c";

and all the rest here? At least I would expect the "compatible" property
to be in the same place above.

Also, I think you should remove the "-i2c" postfix from the name, that
is already implied by the parent bus.

> +	Vdd-supply = <&lis3_reg>;
> +	Vdd_IO-supply = <&lis3_reg>;
> +
> +	st,click-single-x;
> +	st,click-single-y;
> +	st,click-single-z;
> +	st,click-thresh-x = <10>;
> +	st,click-thresh-y = <10>;
> +	st,click-thresh-z = <10>;
> +	st,irq1-click;
> +	st,irq2-click;
> +	st,wakeup-x-lo;
> +	st,wakeup-x-hi;
> +	st,wakeup-y-lo;
> +	st,wakeup-y-hi;
> +	st,wakeup-z-lo;
> +	st,wakeup-z-hi;
> +	st,min-limit-x = <120>;
> +	st,min-limit-y = <120>;
> +	st,min-limit-z = <140>;
> +	st,max-limit-x = <550>;
> +	st,max-limit-y = <550>;
> +	st,max-limit-z = <750>;

Is there a binding document that describes all these?

	Arnd


More information about the devicetree-discuss mailing list