[PATCH v2 4/4] ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm

[AnilKumar Ch]

Add lis331dlh device tree data to am335x-evm.dts. In AM335x EVM
lis331dlh accelerometer is connected to I2C2 bus. So this patch
change the status of I2C2 node to "okay" to use I2C2 bus. Also
added all the required platform data to am335x-evm.

Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
---
 arch/arm/boot/dts/am335x-evm.dts |   42 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 9fb59c5..890f955 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -47,6 +47,15 @@
 			};
 		};
 
+		i2c2: i2c at 4802a000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			lis331dlh: lis331dlh at 18 {
+				reg = <0x18>;
+			};
+		};
+
 		dcan1: d_can at 481d0000 {
 			status = "okay";
 			pinctrl-names = "default";
@@ -61,6 +70,39 @@
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 	};
+
+	lis3_reg: fixedregulator at 1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+};
+
+&lis331dlh {
+	compatible = "st,lis331dlh-i2c";
+	Vdd-supply = <&lis3_reg>;
+	Vdd_IO-supply = <&lis3_reg>;
+
+	st,click-single-x;
+	st,click-single-y;
+	st,click-single-z;
+	st,click-thresh-x = <10>;
+	st,click-thresh-y = <10>;
+	st,click-thresh-z = <10>;
+	st,irq1-click;
+	st,irq2-click;
+	st,wakeup-x-lo;
+	st,wakeup-x-hi;
+	st,wakeup-y-lo;
+	st,wakeup-y-hi;
+	st,wakeup-z-lo;
+	st,wakeup-z-hi;
+	st,min-limit-x = <120>;
+	st,min-limit-y = <120>;
+	st,min-limit-z = <140>;
+	st,max-limit-x = <550>;
+	st,max-limit-y = <550>;
+	st,max-limit-z = <750>;
 };
 
 /include/ "tps65910.dtsi"
-- 
1.7.9.5