[PATCH 2/2] arm/dts: AM33XX: Add device tree OPP table
Benoit Cousson
b-cousson at ti.com
Thu Sep 13 03:21:55 EST 2012
+ Paul
Hi Anil,
On 08/31/2012 11:37 AM, AnilKumar Ch wrote:
> Add DT OPP table for AM33XX family of devices. This data is
> decoded by OF with of_init_opp_table() helper function.
>
> Also adds cpu0 supply name to the corresponding dts files.
> cpu0-supply name is used by cpufreq-cpu0 driver to get the
> regulator pointer for voltage modifications.
>
> Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
I've just applied your patch in my for_3.7/dts_part2 branch.
I changed the subject to use "ARM: dts: " prefix seems it seems to be
the convention nowadays.
I can apply as the well the clock patch if Paul acks it, but it can go
through Paul as well since there is no strong dependency between them AFAIK.
Thanks,
Benoit
> ---
> arch/arm/boot/dts/am335x-bone.dts | 6 ++++++
> arch/arm/boot/dts/am335x-evm.dts | 6 ++++++
> arch/arm/boot/dts/am33xx.dtsi | 15 +++++++++++++++
> 3 files changed, 27 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
> index ce486fc..2767b5f 100644
> --- a/arch/arm/boot/dts/am335x-bone.dts
> +++ b/arch/arm/boot/dts/am335x-bone.dts
> @@ -13,6 +13,12 @@
> model = "TI AM335x BeagleBone";
> compatible = "ti,am335x-bone", "ti,am33xx";
>
> + cpus {
> + cpu at 0 {
> + cpu0-supply = <&dcdc2_reg>;
> + };
> + };
> +
> memory {
> device_type = "memory";
> reg = <0x80000000 0x10000000>; /* 256 MB */
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index baa3276..54d972c 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -13,6 +13,12 @@
> model = "TI AM335x EVM";
> compatible = "ti,am335x-evm", "ti,am33xx";
>
> + cpus {
> + cpu at 0 {
> + cpu0-supply = <&vdd1_reg>;
> + };
> + };
> +
> memory {
> device_type = "memory";
> reg = <0x80000000 0x10000000>; /* 256 MB */
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index ab744d6..2043b53 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -25,6 +25,21 @@
> cpus {
> cpu at 0 {
> compatible = "arm,cortex-a8";
> +
> + /*
> + * To consider voltage drop between PMIC and SoC,
> + * tolerance value is reduced to 2% from 4% and
> + * voltage value is increased as a precaution.
> + */
> + operating-points = <
> + /* kHz uV */
> + 720000 1285000
> + 600000 1225000
> + 500000 1125000
> + 275000 1125000
> + >;
> + voltage-tolerance = <2>; /* 2 percentage */
> + clock-latency = <300000>; /* From omap-cpufreq driver */
> };
> };
>
>
More information about the devicetree-discuss
mailing list